Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-07-06 02:44:11
From: danfe
Description: P3-800@1000 MHz, GA-6OXET i815EP mobo, 512 MB SDRAM, SBLive! 5.1, NVidia GF2 MX 400, Maxtor/IBM ATA diks, SCSI tape, Inter/Dlink NICs
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #1: Wed Mar  3 13:17:54 NOVT 2004
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1006830799 Hz
CPU: Intel Pentium III (1006.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
real memory  = 536805376 (524224K bytes)
avail memory = 517267456 (505144K bytes)
Preloaded elf kernel "kernel" at 0xc0301000.
Preloaded elf module "vesa.ko" at 0xc030109c.
Preloaded elf module "linux.ko" at 0xc0301138.
Preloaded elf module "snd_emu10k1.ko" at 0xc03011d8.
Preloaded elf module "snd_pcm.ko" at 0xc030127c.
Preloaded elf module "agp.ko" at 0xc030131c.
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc02b81e2 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
Using $PIR table, 11 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x8086, dev=0x1229) at 1.0 irq 5
pci2: <unknown card> (vendor=0x10ec, dev=0x8139) at 2.0 irq 10
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9800-0x98ff mem 0xdf101000-0xdf101fff irq 11 at device 3.0 on pci2
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
pcm0: <Creative EMU10K1> port 0x9c00-0x9c1f irq 5 at device 5.0 on pci2
pcm0: <eMicro EM28028 AC97 Codec>
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcc7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 76319MB <MAXTOR 4K080H4> [155060/16/63] at ata0-master UDMA100
ad1: 58644MB <IC35L060AVVA07-0> [119150/16/63] at ata0-slave UDMA100
ad2: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata1-master UDMA100
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 2 lun 0
sa0: <HP T4000s 1.07> Removable Sequential Access SCSI-2 device 
sa0: 3.300MB/s transfers
Mounting root from ufs:/dev/ad0s1a