Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-07-08 12:30:45
From: tm
Description: Acorn RiscPC 600 + StrongARM CPU card
NetBSD 2.0F (RiscPC) #266: Wed Jun 30 09:19:40 MEST 2004
total memory = 40960 KB
avail memory = 37084 KB
mainbus0 (root)
cpu0 at mainbus0: SA-110 step K (SA-1 core)
cpu0: DC enabled IC enabled WB enabled EABT
cpu0: 16KB/32B 32-way Instruction cache
cpu0: 16KB/32B 32-way write-back Data cache
cpu0: SA-110 with bugged STM^ instruction
pioc0 at mainbus0 base 0xf6210000-0xf6212fff
pioc0: SMC FDC37C665GT peripheral controller rev 2
wdc0 at pioc0 offset 0x1f0-0x1f7 irq 9
atabus0 at wdc0 channel 0
fdc0 at pioc0 offset 0x3f0-0x3f7 irq 12 drq 0x00002000
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
com0 at pioc0 offset 0x3f8-0x3ff irq 10: ns16550a, working fifo
atppc0 at pioc0 offset 0x278 irq 0atppc0: FIFO <depth,wthr,rthr>=<16,15,15>
atppc0: capabilities=3d<INTR,FIFO,PS2,ECP,EPP>
ppbus0 at atppc0
ppbus0: No IEEE1284 device found.
lpt0 at ppbus0: port mode = 1<COMPATIBLE>
iomd0 at mainbus0: IOMD20 version 2
iomd0: DRAM refresh=16us
clock0 at iomd0
iomdkbc0 at iomd0
pckbd0 at iomdkbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
iomdiic0 at iomd0
iic0 at iomdiic0: I2C bus
pcfrtc0 at iic0 addr 0x50: PCF8583 Real-time Clock/NVRAM
pcfrtc0:  32.768 kHz clock
qms0 at iomd0
wsmouse0 at qms0 mux 0
vidc0 at mainbus0: VIDC20
vidcvideo0 at vidc0: refclk=24MHz 2048KB VRAM : using 1024 x 768, 8bpp
wsdisplay0 at vidcvideo0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vidcaudio0 at vidc0: 16-bit external DAC
audio0 at vidcaudio0: half duplex
podulebus0 (root)
podule1  at podulebus0 : Alsystems : SCSI II host adapter : Power-tec (Alsystems) Generic SCSI with
netslot0 at podulebus0 : I-Cubed : AEH62/78/99 (EtherLan 602) : Acorn Risc PC/A7000 interface M-) i
-cubed ltd, EtherLan 600A (00:
ptsc0 at podulebus0 slot 1 dmabuf V0xf23d9000 P0x140ba000: host=7
scsibus0 at ptsc0: 8 targets, 8 luns per target
ne0 at podulebus0 [ netslot 0 ]: EtherLan 600A ethernet
ne0: Ethernet address xx:xx:xx:xx:xx:xx
ne0: 10base2, 10baseT, auto, default auto
ne0: NE1000 chipset, 8 Kb memory
ne0: 32KB buffer memory
ipl_bio=00108c09 ipl_net=00100400 ipl_tty=00100400 ipl_vm=00100400
ipl_audio=00000400 ipl_imp=00000400 ipl_high=00000400 ipl_serial=00000000
clock: hz=100 stathz = 0 profhz = 0
Setting statclock to 0Hz (-1 ticks)
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 2 lun 0: <PIONEER, CD-ROM DR-124X, 1.04> cdrom removable
sd0 at scsibus0 target 3 lun 0: <FUJITSU, M2513A, 1500> optical removable
sd0: drive offline
wd0 at atabus0 drive 0: <IBM-DHEA-36481>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6197 MB, 12592 cyl, 16 head, 63 sec, 512 bytes/sect x 12692736 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
boot device: wd0