Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-07-14 03:00:02
From: mako
Description: CASIO FIVA MPC-205
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #26: Sun May 23 13:40:55 JST 2004
xxx@xxx:/usr/obj/usr/src/sys/TORO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0843000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 (497.75-MHz 586-class CPU)
Origin = "GenuineTMx86" Id = 0x543 Stepping = 3
Features=0x84813f<FPU,VME,DE,PSE,TSC,MSR,CX8,CMOV,PN,MMX>
real memory = 318701568 (303 MB)
avail memory = 302186496 (288 MB)
Crusoe LongRun support enabled, current mode: 1 <500MHz 1600mV 100%>
random: <entropy source, Software, Yarrow>
acpi0: <PTLTD RSDT> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 4 INTA is routed to irq 10
pcib0: slot 9 INTA is routed to irq 9
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 10 INTB is routed to irq 11
pcib0: slot 11 INTA is routed to irq 10
pcib0: slot 12 INTA is routed to irq 11
pcib0: slot 20 INTA is routed to irq 11
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <multimedia, audio> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at device 9.0 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1420 PCI-CardBus Bridge> irq 11 at device 10.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <Texas Instruments TSB12LV26> mem 0xfc000000-0xfc003fff,0xfc006000-0xfc0067ff irq 10 at device 11.0 on pci0
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:17:b9
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc1, gen=1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xfc006800-0xfc0068ff irq 11 at device 12.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
rl0: [GIANT-LOCKED]
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0x1800-0x180f,0x3f6,0x1f0-0x1f7 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata2: simplex device, DMA on primary only
ata2: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0000-0xd0fff irq 11 at device 20.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_video0: <ACPI video extension> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x8> port 0x66,0x62 on acpi0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd8000-0xdbfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 497752096 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575B Fast Etherlink XL> port 0x1100-0x117f mem 0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus0
miibus1: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus1
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
xl0: [GIANT-LOCKED]
firewire0: New S400 device ID:004026020904c271
ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master PIO4
da0 at sbp0 bus 0 target 0 lun 0
da0: <MELCO IN 1394MEL-HD DRIVE 0001> Fixed Direct Access SCSI-2 device
da0: 50.000MB/s transfers
da0: 152627MB (312581809 512 byte sectors: 255H 63S/T 19457C)
Mounting root from ufs:da0s1d