Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-07-15 05:46:35
From: rocky
Description: PowerEdge 1500SC motherboard, 2x PIII
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #7: Wed Jul 7 21:49:29 CEST 2004
[_EMAIL_XXXXXXXX]:/usr/obj/usr/src/sys/RAMBO
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III CPU - S 1266MHz (1262.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 257372160 (251340K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03b2000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fc360
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib1: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 13 -> irq 2
IOAPIC #1 intpin 14 -> irq 7
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem 0xfeb01000-0xfeb01fff irq 2 at device 2.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeb00000-0xfeb00fff irq 7 at device 2.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 1 -> irq 10
pci0: <PCI bus> on pcib0
dc0: <82c169 PNIC 10/100BaseTX> port 0xec00-0xecff mem 0xfe101000-0xfe1010ff irq 10 at device 4.0 on pci0
dc0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 14.0
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8c0-0x8c3,0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 0 -> irq 11
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xcce0-0xccff mem 0xfe900000-0xfe93ffff,0xfe940000-0xfe95ffff irq 11 at device 2.0 on pci2
em0: Speed:N/A Duplex:N/A
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib4
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xec000-0xeffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
DUMMYNET initialized (011031)
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
ad0: timeout waiting for interrupt
ad0: 152627MB <SAMSUNG SP1614N> [310101/16/63] at ata0-master UDMA100
ad1: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata0-slave UDMA100
ad2: 42934MB <WDC WD450AA> [87233/16/63] at ata1-master UDMA66
ad3: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata1-slave UDMA100
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc1 bus 0 target 1 lun 0
da0: <FUJITSU MAG3091LP 0112> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 8704MB (17827698 512 byte sectors: 255H 63S/T 1109C)