Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-07-24 19:53:27
From: bluefelix
Description: FreeBSD 5.2.1 on a Dell PowerEdge 4600 with one 18GB RAID1 array and one 200GB RAID5 array.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #1: Wed Jun 30 13:45:47 CDT 2004
    toor@XXX:/usr/obj/usr/src/sys/XXX
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a69000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0a6921c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a692c8.
ACPI APIC Table: <DELL   PE4600  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 2.00GHz (1989.81-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Hyperthreading: 2 logical CPUs
real memory  = 2684223488 (2559 MB)
avail memory = 2604183552 (2483 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic2: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
Pentium Pro MTRR support enabled
VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc0a14c82 (1000022)
VESA: ATI MACH64
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   PE4600  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00fc0c0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 5
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0ffff
f,0xfe203000-0xfe203fff irq 19 at device 4.0 on pci0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfe202000
-0xfe202fff irq 18 at device 6.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <display, VGA> at device 14.0 (no driver attached)
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d
0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xfe200000-0xfe200fff irq 5 at device
 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem 0xfcf00000-0xfcf
0ffff irq 22 at device 6.0 on pci1
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on bge0
brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus1
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
pcib2: <ACPI PCI-PCI bridge> at device 8.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pci2: <mass storage, SCSI> at device 6.0 (no driver attached)
pci2: <mass storage, SCSI> at device 6.1 (no driver attached)
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 20 at device 8.1 on pci1
aac0: [MPSAFE]
aac0: i960RX 100MHz, 118MB cache memory, optional battery present
aac0: Kernel 2.7-1, Build 3170, S/N 6021d3
aac0: Supported Options=55c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,SGMAP64>
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci13: <ACPI PCI bus> on pcib5
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xcbfff,0xc0000-0xc7fff on
isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 17355MB (35544576 sectors)
GEOM: create disk aacd0 dp=0xc938ca0c
aacd1: <RAID 5> on aac0
aacd1: 209995MB (430070016 sectors)
GEOM: create disk aacd1 dp=0xc938c90c
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/aacd0s2a