Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-07-28 16:03:21
From: Bortzmeyer
Description: NetBSD 1.6.2 on UltraSparc 10 headless Mostly used for development/experimentation
console is /pci@1f,0/pci@1,1/ebus@1/se@14,400000:b
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.2 (GENERIC) #3: Mon Feb  9 18:37:36 CET 2004
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/users/he/build-1-6/obj.sparc64/sys/arch/sparc64/compile/GENERIC
total memory = 640 MB
avail memory = 584 MB
using 4108 buffers containing 32864 KB of memory
bootpath: /pci@1f,0/pci@1,1/ide@3,0/disk@0,0
mainbus0 (root): SUNW,Ultra-5_10
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 299.829 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc4000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 2f04000 to 2f84000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x11)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
se at ebus0 addr 400000-40007f ipl 43 not configured
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59: [_HOSTID_XXXXX]
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: CS4231A
audio0 at audiocs0: full duplex
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address [_MAC_XXXXXXXXXX]
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ATI Technologies 3D Rage I/II (VGA display, revision 0x9a) at pci1 dev 2 function 0 not configured
pciide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
pciide0: using ivec 1820 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST34342A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 4103 MB, 8894 cyl, 15 head, 63 sec, 512 bytes/sect x 8404830 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to native-PCI mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8240B, 1997/12/08, 1.24> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x11)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
siop0 at pci2 dev 1 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at ivec 10
scsibus0 at siop0: 16 targets, 8 luns per target
siop1 at pci2 dev 1 function 1: Symbios Logic 53c875 (ultra-wide scsi)
siop1: using on-board RAM
siop1: interrupting at ivec 11
scsibus1 at siop1: 16 targets, 8 luns per target
SUNW,ffb at mainbus0 not configured
pcons0 at mainbus0
No counter-timer -- using %tick at 299MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 9 lun 0: <SEAGATE, ST39140W, 1281> SCSI2 0/direct fixed
sd0: 8683 MB, 9006 cyl, 8 head, 246 sec, 512 bytes/sect x 17783240 sectors
sd0: sync (50.0ns offset 15), 16-bit (40.000MB/s) transfers, tagged queueing
Kernelized RAIDframe activated
root on wd0a dumps on wd0b
root file system type: ffs