Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-08-01 22:03:15
From: George
Description: The box is a Dell Poweredge 2400, Pentium III. Earlier listed as an OpenBSD 3.5 box, it`s been rebuilt as a FreeBSD 4.10 because of security tools I need in the ports.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (731.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536862720 (524280K bytes)
avail memory = 516915200 (504800K bytes)
Preloaded elf kernel "kernel" at 0xc0551000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fc320
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xfc00-0xfcff mem 0xfcfff000-0xfcffffff irq 14 at device 4.0 on pci1
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfcffe000-0xfcffefff irq 5 at device 6.0 on pci1
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
ahc2: <Adaptec 2940 Ultra SCSI adapter> port 0xec00-0xecff mem 0xfe103000-0xfe103fff irq 11 at device 4.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xe8c0-0xe8ff mem 0xfe000000-0xfe0fffff,0xfe102000-0xfe102fff irq 10 at device 8.0 on pci0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI model 4759 graphics accelerator> at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 7 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x10ec, dev=0x8169) at 6.0 irq 4
pci2: <unknown card> (vendor=0x10ec, dev=0x8169) at 12.0 irq 3
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xce800-0xcefff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc2 bus 0 target 6 lun 0
sa0: <QUANTUM DLT7000 1624> Removable Sequential Access SCSI-2 device
sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
pass2 at ahc0 bus 0 target 6 lun 0
pass2: <DELL 1x6 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device
pass2: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39103LC 0001> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DNES-309170Y SA60> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 8683MB (17783301 512 byte sectors: 255H 63S/T 1106C)