Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-08-24 04:56:14
From: kamabis
Description: FreeBSD5.2.1R on hp Lt6000r (XEON 700MHz L2:2MB 6way, 3.2GB, AmiMegaRAID)
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #2: Sat Jul 24 00:24:07 JST 2004
    kamabis@****.kamabis.org:/usr/src/sys/i386/compile/*********
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0733000.
MPTable: <HP       LT 6000     >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III Xeon (700.04-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6a1  Stepping = 1
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 3430940672 (3272 MB)
avail memory = 3336581120 (3182 MB)
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
 cpu0 (BSP): APIC ID:  6
 cpu1 (AP): APIC ID:  0
 cpu2 (AP): APIC ID:  1
 cpu3 (AP): APIC ID:  2
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 16
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 16 entries at 0xc00fdec0
pcib1: <MPTable Host-PCI bridge> at pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 6 INTA routed to irq 18
pcib0: slot 15 INTA routed to irq 26
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1800-0x183f mem 0xcc900000-0xcc9fffff,0xcc801000-0xcc801fff irq 18 at device 6.0 on pci0
fxp0: Ethernet address **:**:**:**:**:**
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1040-0x104f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1840-0x184f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xcc803000-0xcc803fff irq 26 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib4: <MPTable Host-PCI bridge> at pcibus 4 on motherboard
pci4: <PCI bus> on pcib4
pcib4: slot 2 INTA routed to irq 16
pcib4: slot 2 INTB routed to irq 17
pcib4: slot 3 INTA routed to irq 20
pci4: <base peripheral> at device 2.0 (no driver attached)
pci4: <serial bus> at device 2.1 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci4
pci5: <PCI bus> on pcib2
pci5: <base peripheral> at device 8.0 (no driver attached)
amr0: <LSILogic MegaRAID> mem 0xe0000000-0xefffffff irq 20 at device 3.1 on pci4
amr0: <Integrated HP NetRAID (T7)> Firmware E.01.01, BIOS B.02.02, 128MB RAM
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0700> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0400> can`t assign resources (port)
Timecounters tick every 10.000 msec
acd0: CDROM <CD-224E> at ata0-master PIO4
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 52095MB (106690560 sectors) RAID 5 (optimal)
GEOM: create disk amrd0 dp=0xc9fcf40c
ses0 at amr0 bus 0 target 5 lun 0
ses0: <HP SAFTE; U160/M BP 1023> Fixed Processor SCSI-2 device 
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Mounting root from ufs:/dev/amrd0s1a