Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-08-24 11:52:03
From: holger
Description: FreeBSD/i386 4.10-STABLE on a Pentium III/1GHz
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #1: Thu Aug 19 15:32:31 CEST 2004
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/MAUDE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (1002.28-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX
,FXSR,SSE>
real memory  = 536784896 (524204K bytes)
avail memory = 519188480 (507020K bytes)
Preloaded elf kernel "kernel" at 0xc0367000.
Preloaded elf module "linux.ko" at 0xc036709c.
Preloaded elf module "snd_ich.ko" at 0xc036713c.
Preloaded elf module "snd_pcm.ko" at 0xc03671dc.
Preloaded elf module "agp.ko" at 0xc036727c.
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00f1360
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 
on pci0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xf4000000-0xf400007f irq 9 
at device 10.0 on pci2
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 12 at device 
31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse OpticalŪ, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 3
1.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
pcm0: <Intel ICH2 (82801BA)> port 0xe100-0xe13f,0xe000-0xe0ff irq 10 at device 31.5 on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcc7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
IP Filter: v3.4.35 initialized.  Default = block all, Logging = enabled
ad0: 57241MB <WDC WD600AB-00CDB0> [116301/16/63] at ata0-master UDMA100
acd0: DVD-ROM <MATSHITADVD-ROM SR-8587> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s3a
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $
vmmon: Module vmmon: initialized
drm0: <Matrox G400/G450 (AGP)> mem 0xf4800000-0xf4ffffff,0xf5000000-0xf5003fff,0xf6000000-0
xf7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized mga 3.0.2 20010321 on minor 0