Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-08-30 17:23:43
From: urr
Description: DragonFly/i386 1.1-current, 2x550MHz, 384MB RAM.
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.1-CURRENT #0: Wed Aug 11 17:43:13 EEST 2004
    [_EMAIL_XXXXXXXXX]:/usr/obj/usr/src/sys/ANTS
TSC clock: 551228592 Hz, i8254 clock: 1193136 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (551.25-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 402640896 (393204K bytes)
avail memory = 379424768 (370532K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "/kernel" at 0xc06cc000.
Preloaded elf module "/modules/acpi.ko" at 0xc06cc238.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f0d20
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
acpi0: <ASUS P2B-D> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: couldn`t read bus number from cfg space
pcib1: trying bus number 1
pci1: <ACPI PCI bus> on pcib1
IOAPIC #0 intpin 16 -> irq 2
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 18 -> irq 9
IOAPIC #0 intpin 17 -> irq 10
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xdfffffff at d
evice 0.0 on pci0
pcib2: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 2
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 5 at dev
ice 4.2 on pci0
installed MI handler for int 5
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 4.3
ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xcc000000-0
xcc000fff irq 5 at device 9.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb800-0xb87f mem 0xcb800000-0xcb80
007f irq 9 at device 10.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: MAC address: [_MAC_XXXXXXXXXX]
atapci1: <HighPoint HPT370 ATA100 controller> port 0xa000-0xa0ff,0xa400-0xa403,0
xa800-0xa807,0xb000-0xb003,0xb400-0xb407 irq 10 at device 11.0 on pci0
ata2: at 0xb400 on atapci1
installed MI handler for int 10
ata3: at 0xa800 on atapci1
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x9800-0x983f mem 0xca800000-0xca8ffff
f,0xcb000000-0xcb000fff irq 2 at device 12.0 on pci0
installed MI handler for int 2
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: MAC address: [_MAC_XXXXXXXXXX]
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd4000-0xd57ff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
IP packet filtering initialized, divert enabled, rule-based forwarding enabled,
default to accept, unlimited logging
IPv6 packet filtering initialized, default to accept, logging limited to 100 pac
kets/entry
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled
ad4: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata2-master UDMA100
acd0: CDROM <_NEC CD-ROM CD-3002A> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 10 lun 0
da0: <MAXTOR ATLAS10K4_36WLS DFL0> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabl
ed
da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
cd1 at ata0 bus 0 target 0 lun 0
cd1: <_NEC CD-ROM CD-3002A C000> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R   PX-W1210S 1.01> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c
losed