Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-09-22 13:15:39
From: JAWA
Description: Nat gateway, P200/64 running FreeBSD 5.2-CURRENT
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Tue May  4 22:50:51 EEST 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc072d000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P54C (200.46-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
real memory  = 67108864 (64 MB)
avail memory = 60239872 (57 MB)
Intel Pentium detected, installing workaround for F00F bug
random: <entropy source, Software, Yarrow>
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0xffa0-0xffaf at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0
atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f4
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Lazy allocation of 0x8 bytes rid 0x18 type 4 at 0x170
atapci0: Lazy allocation of 0x4 bytes rid 0x1c type 4 at 0x374
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x7f00-0x7f3f irq 5 at device 13.0 o
n pci0
xl0: Reserved 0x40 bytes for rid 0x10 type 4 at 0x7f00
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
pci0: <bridge, PCI-CardBus> at device 14.0 (no driver attached)
pcn0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x7f80
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0x7f80-0x7f9f mem 0xffaffee0-0xffaffeff 
irq 9 at device 15.0 on pci0
miibus1: <MII bus> on pcn0
lxtphy0: <LXT970 10/100 media interface> on miibus1
lxtphy0:  100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-F
DX, auto
pcn0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7c00
rl0: <RealTek 8139 10/100BaseTX> port 0x7c00-0x7cff mem 0xffafff00-0xffafffff ir
q 11 at device 16.0 on pci0
miibus2: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus2
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
orm0: <Option ROMs> at iomem 0xf4000-0xf4fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address: xx:xx:xx:xx:xx:xx
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0c02> can`t assign resources (port)
Timecounter "TSC" frequency 200455497 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to den
y, logging disabled
ad0: 4134MB <QUANTUM BIGFOOT_CY4320A> [8960/15/63] at ata0-master WDMA2
acd0: CDR <CR-2801TE> at ata0-slave PIO3
Mounting root from ufs:/dev/ad0s1a
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0x7f40-0x7f5f irq 11 at devic
e 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x7f40
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ubt0: Cambridge Silicon Radio Ltd. Bluetooth USB dongle, rev 1.10/4.43, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPack
etSize=49; nframes=6, buffer size=294