Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-09-22 13:27:06
From: JAWA
Description: Workstation P2-300@350/384mb running FreeBSD-5.2-CURRENT
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Sat Mar 13 09:10:20 EET 2004 [_EMAIL_XXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/jawa1 Preloaded elf kernel "/boot/kernel.x/kernel" at 0xc08e9000. Preloaded elf module "/boot/kernel.x/ng_ubt.ko" at 0xc08e91f8. Preloaded elf module "/boot/kernel.x/netgraph.ko" at 0xc08e92a8. Preloaded elf module "/boot/kernel.x/acpi.ko" at 0xc08e9358. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping = 4 Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX > real memory = 402587648 (383 MB) avail memory = 384200704 (366 MB) Pentium Pro MTRR support enabled cpu0 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA692 AWRDACPI> on motherboard pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fde60 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xc f8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 7 INTD is routed to irq 10 pcib0: slot 9 INTB is routed to irq 5 pcib0: slot 9 INTC is routed to irq 9 pcib0: slot 9 INTD is routed to irq 10 pcib0: slot 9 INTA is routed to irq 11 pcib0: slot 10 INTA is routed to irq 5 pcib0: slot 11 INTA is routed to irq 9 pcib0: slot 12 INTA is routed to irq 10 pcib0: slot 13 INTA is routed to irq 10 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 drm0: <ATI Radeon QY RV100 7000/VE> port 0xc000-0xc0ff mem 0xdd000000-0xdd00ffff ,0xd0000000-0xd7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xd8000000 64MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596B UDMA66 controller> port 0xd000-0xd00f at device 7.1 on pci 0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pc i0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdf005000-0xdf005fff irq 5 at device 9.0 on pci0 usb1: OHCI version 1.0, legacy support usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb1: USB revision 1.0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdf000000-0xdf000fff irq 9 at device 9.1 on pci0 usb2: OHCI version 1.0, legacy support usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb2: USB revision 1.0 uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdf001000-0xdf001fff irq 10 at device 9.2 on pci0 usb3: OHCI version 1.0, legacy support usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2 usb3: USB revision 1.0 uhub3: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 9.3 (no driver attached) sym0: <875> port 0xd800-0xd8ff mem 0xdf004000-0xdf004fff,0xdf003000-0xdf0030ff i rq 5 at device 10.0 on pci0 sym0: Tekram NVRAM, ID 15, Fast-20, SE, NO parity ed0: <NE2000 PCI Ethernet (KTI)> port 0xdc00-0xdc1f irq 9 at device 11.0 on pci0 ed0: address [_MAC_XXXXXXXXXX], type NE2000 (16 bit) bktr0: <BrookTree 848A> mem 0xdf006000-0xdf006fff irq 10 at device 12.0 on pci0 bktr0: Intel Smart Video III/VideoLogic Captivator PCI, <no> tuner. pcm0: <CMedia CMI8738> port 0xe000-0xe0ff irq 10 at device 13.0 on pci0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcm1: <OPTi924> at port 0x380-0x38b,0x130-0x137,0x220-0x22f irq 11 drq 1,0 on is a0 opti_init: invalid MSS base address! device_probe_and_attach: pcm1 attach returned 6 unknown: <MPU401> can`t assign resources (irq) unknown: <CD> can`t assign resources (irq) unknown: <Modem> can`t assign resources (irq) Timecounter "TSC" frequency 350798020 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% acd0: CDROM <HITACHI CDR-7730> at ata1-master PIO2 Waiting 5 seconds for SCSI devices to settle da0 at sym0 bus 0 target 0 lun 0 da0: <IBM DNES-318350W SA30> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da1 at sym0 bus 0 target 3 lun 0 da1: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) Mounting root from ufs:/dev/da0s1a umass0: Genesys Logic USB TO IDE, rev 2.00/0.02, addr 2 da2 at umass-sim0 bus 0 target 0 lun 0 da2: <ST310215 A 0811> Fixed Direct Access SCSI-0 device da2: 1.000MB/s transfers da2: 9729MB (19925880 512 byte sectors: 255H 63S/T 1240C)