Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-11-08 12:34:31
From: Richard Bejtlich
Description: Dell PowerEdge 2300 dual PIII 500 MHz server running FreeBSD 5.3 RELEASE with kernel rebuilt for SMP
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Mon Nov 8 17:05:56 EST 2004 [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/janney ACPI APIC Table: <DELL PE2300 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium III/Pentium III Xeon/Celeron (498.75-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536862720 (511 MB) avail memory = 515686400 (491 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE2300> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xec00-0xecff mem 0xf9fff000 -0xf9ffffff irq 16 at device 4.0 on pci2 ahc0: [GIANT-LOCKED] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xf9ffe000-0xf 9ffefff irq 16 at device 6.0 on pci2 ahc1: [GIANT-LOCKED] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs pcib3: <PCI-PCI bridge> at device 10.0 on pci2 pci3: <PCI bus> on pcib3 amr0: <LSILogic MegaRAID> mem 0xf3c00000-0xf3ffffff irq 18 at device 10.1 on pci 2 amr0: [GIANT-LOCKED] amr0: <Series 466> Firmware 3.13, BIOS 1.43, 16MB RAM pci2: <multimedia, audio> at device 13.0 (no driver attached) pci2: <simple comms> at device 13.1 (no driver attached) pci2: <input device> at device 13.2 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x 3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0 uhci0: 0x20 bytes of rid 0x20 res 4 failed. uhci0: Could not map ports device_attach: uhci0 attach returned 6 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) atapci1: <Promise PDC20262 UDMA66 controller> port 0xdc80-0xdcbf,0xdcd8-0xdcdb,0 xdce0-0xdce7,0xdcf0-0xdcf3,0xdcf8-0xdcff mem 0xfe000000-0xfe01ffff irq 20 at dev ice 8.0 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 pci0: <simple comms> at device 10.0 (no driver attached) pcib4: <PCI-PCI bridge> at device 12.0 on pci0 pci4: <PCI bus> on pcib4 ohci0: <NEC uPD 9210 USB controller> mem 0xf7fff000-0xf7ffffff irq 22 at device 8.0 on pci4 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0 usb0: <NEC uPD 9210 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xf7ffe000-0xf7ffefff irq 21 at device 8.1 on pci4 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci4: <serial bus, USB> at device 8.2 (no driver attached) fwohci0: <Texas Instruments TSB43AB23> mem 0xf7ff8000-0xf7ffbfff,0xf7ffd000-0xf7 ffd7ff irq 22 at device 12.0 on pci4 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:0d:af fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX] fwe0: Ethernet address: [_MAC_XXXXXXXXXX] fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xfe020000-0xfe02 007f irq 17 at device 14.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: [_MAC_XXXXXXXXXX] fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on ac pi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xc8800-0xc8fff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=1<ERROR> error=4<ABOR TED> ast0: TAPE <Seagate STT8000A/5.02> at ata2-slave BIOSPIO ata3-master: FAILURE - SETFEATURES SET TRANSFER MODE status=1<ERROR> error=4<ABO RTED> afd0: REMOVABLE <IOMEGA ZIP 100 ATAPI/23.D> at ata3-master BIOSPIO Waiting 15 seconds for SCSI devices to settle amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 25704MB (52641792 sectors) RAID 0 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <DELL 1x6 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #1 Launched! cd0 at ahc1 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:464 1.05> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/amrd0s1a