Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-12-10 07:29:46
From: dettus
Description: its my sony vaio prg215h
NetBSD 2.0 (GENERIC_LAPTOP) #0: Wed Dec  1 11:01:08 UTC 2004
       
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj
/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC_L
APTOP
total memory = 254 MB
avail memory = 243 MB
BIOS32 rev. 0 found at 0xfd826
PCI BIOS rev. 2.1 found at 0xfd944
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfdf60, size 128 bytes (6
entries)
PCI Interrupt Router at 000:17:0 (VIA Technologies VT82C596A (Apollo
Pro) PCI-ISA Bridge compatible)
   --------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP-M 2200+ (686-class), 1666.81 MHz, id 0x6a0
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev.
0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8366 CPU-AGP Bridge
(rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x0175
(rev. 0xa3)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
rtk0 at pci0 dev 12 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 9
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci0 dev 14 function 0: Ricoh 5C476 PCI-CardBus bridge (rev.
0xaa)
cbb1 at pci0 dev 14 function 1: Ricoh 5C476 PCI-CardBus bridge (rev.
0xaa)
Ricoh 5C552 PCI-CardBus bridge/Firewire (Firewire serial bus,
interface 0x10, revision 0x02) at pci0 dev 14 function 2 not
configured
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
pci_intr_map: no mapping for pin B (line=00)
uhci1: couldn`t map interrupt
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
pci_intr_map: no mapping for pin C (line=00)
uhci2: couldn`t map interrupt
ehci0 at pci0 dev 16 function 3: VIA Technologies VT8237 EHCI USB
Controller (rev. 0x82)
pci_intr_map: no mapping for pin D (line=ff)
ehci0: couldn`t map interrupt
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev.
0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA VT8235 AC`97 (rev 0x50)
auvia0: interrupting at irq 9
auvia0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no
3D stereo
auvia0: ac97: ext id 601<AC97_22,AMAP,VRA>
audio0 at auvia0: full duplex, mmap, independent
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous
communications, revision 0x80) at pci0 dev 17 function 6 not
configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 9
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug `n Play devices found
apm0 at mainbus0: Power Management spec V1.2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <HITACHI_DK23EA-40>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100)
(using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R6012, , 1S32> cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
(using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)