Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-12-27 15:24:24
From: ehanneken
Description: AMD K6-2 400 MHz, FIC PA-2013 (VIA APOLLO MVP3), 128 MB Crucial PC100 SDRAM (CAS 3.0), Matrox Mystique 220, Creative Sound Blaster 16 PnP, Netgear FA312 (10/100 Mbps), Maxtor DiamondMax 4320 Ultra ATA (Model # 91080D5, EIDE, ATA33, 10 GB, 5400 RPM, 512 KB cache), Sony 50x CD-ROM, Lite-On 48x24x48 CD+/-RW
NetBSD 2.0 (ATHENE) #0: Sun Dec 19 18:32:32 EST 2004
	eric@athene:/usr/src/sys/arch/i386/compile/ATHENE
total memory = 255 MB
avail memory = 246 MB
BIOS32 rev. 0 found at 0xfb450
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K6-2 (586-class), 400.93 MHz, id 0x58c
cpu0: features 8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8021bf<PGE,MMX>
cpu0: I-cache 32 KB 32B/line 2-way, D-cache 32 KB 32B/line 2-way
cpu0: ITLB 64 4 KB entries direct-mapped
cpu0: DTLB 128 4 KB entries 2-way
cpu0: 4 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x41)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x02)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
VIA Technologies VT82C586 (Apollo VP) Power Management Controller (miscellaneous bridge, revision 0x10) at pci0 dev 7 function 3 not configured
vga0 at pci0 dev 8 function 0: Matrox MGA Mystique 1064SG (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
sip0 at pci0 dev 9 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip0: interrupting at irq 4
sip0: Ethernet address [_MAC_XXXXXXXXXX]
nsphyter0 at sip0 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
sb0 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5
sb0: Creative SB16 PnP Audio: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
mpu0 at sb0
midi at mpu0 not configured
opl0 at sb0: model OPL3
midi at opl0 not configured
wdc0 at isapnp0 port 0x168/8,0x36e/2 irq 10: Creative SB16 PnP IDE
atabus2 at wdc0 channel 0
isapnp0: <Creative SB16 PnP, PNPFFFF, , Reserved> port 0x100/1 not configured
joy0 at isapnp0 port 0x200/8
joy0: Creative SB16 PnP Game
joy0: joystick not connected
apm0 at mainbus0: Power Management spec V1.2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Maxtor 91080D5>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 10300 MB, 20928 cyl, 16 head, 63 sec, 512 bytes/sect x 21095424 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SONY CDU4811, , PY0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <LITE-ON LTR-48246S, , SS06> cdrom removable
cd1: 32-bit data port
viaide0:1:1: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
cd1: drive supports PIO mode 4viaide0:1:1: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2viaide0:1:1: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)