Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-12-28 16:04:08
From: Peter N. M. Hansteen
Description: Fujitsu-Siemens Amilo D 1840W notebook
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-SECURITY #0: Wed Dec 1 15:22:42 UTC 2004 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3194.56-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073545216 (1023 MB) avail memory = 1040969728 (992 MB) ioapic0: Changing APIC ID to 2 ioapic0 <Version 0.2> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0xb> port 0x66,0x62 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 648 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.AGP_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 fwohci0: <SiS 7007> mem 0xdfff7000-0xdfff7fff irq 17 at device 2.3 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:0e:94 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX] fwe0: Ethernet address: [_MAC_XXXXXXXXXX] fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) atapci0: <SiS 962/963 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <simple comms> at device 2.6 (no driver attached) pcm0: <SiS 7012> port 0xec00-0xec7f,0xe000-0xe0ff irq 18 at device 2.7 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC655 AC97 Codec> ohci0: <SiS 5571 USB controller> mem 0xdfff8000-0xdfff8fff irq 20 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdfff9000-0xdfff9fff irq 21 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xdfffa000-0xdfffafff irq 22 at device 3.2 on pci0 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0xe400-0xe4ff mem 0xdfffc000-0xdfffcfff irq 19 at device 4.0 on pci0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: [_MAC_XXXXXXXXXX] cbb0: <PCI-CardBus Bridge> at device 9.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <PCI-CardBus Bridge> at device 9.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <base peripheral> at device 9.2 (no driver attached) ndis0: <Realtek RTL8180 Wireless LAN (Mini-)PCI NIC> port 0xe800-0xe8ff mem 0xdffffc00-0xdffffcff irq 18 at device 11.0 on pci0 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: [_MAC_XXXXXXXXXX] ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 sio0 port 0x3f8-0x3ff irq 4 drq 1 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 acpi_lid0: <Control Method Lid Switch> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 3194562516 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ad0: 76319MB <FUJITSU MHT2080AT/0022> [155061/16/63] at ata0-master UDMA33 acd0: CDRW <DVD+RW RW8160/1.08> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s1a