Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2005-01-11 22:03:24
From: George
Description: old iMac (you know, the all-in-CRT) running OpenBSD 3.6. Remarkably simple to do after a few basic openfirmware hacks and since I`m booting off MBR and not dual-booting with MacOS. No hardware problems at all at this point.
[ using 373324 bytes of bsd ELF symbol table ]
console out [ATY,Rage128Pk]console in [keyboard] USB found
: memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 800 linebytes 1024 height 600 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.6 (GENERIC) #47: Fri Sep 17 14:55:19 MDT 2004
    [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 201326592 (196608K)
avail mem = 174215168 (170132K)
using 1254 buffers containing 10063872 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 3201): 350 MHz: 512KB backside cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128 PK" rev 0x00, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0: version 0x4614
gpio_obio0 at macobio0
gpio_obio1 at gpio_obio0 irq 47
programmer-switch at gpio_obio0 not configured
zsc0 at macobio0: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at macobio0: irq 24,9,10 speaker
audio0 at awacs0
adb0 at macobio0 irq 25: via-pmu 0 targets
aed0 at adb0 addr 0: ADB Event device
apm0 at adb0: battery flags 0x1, 0% charged
ki2c0 at macobio0
wdc0 at macobio0 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 07>
wd0: 16-sector PIO, LBA, 7162MB, 14668290 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-1760, ZA0E> SCSI0 5/cdrom removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at macobio0 irq 20: DMA
wdc2 at macobio0 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at uhub0 port 1
uhub1: Alps Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/1.10, addr 2
uhub1: 3 ports with 2 removable, bus powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Alps Electric Apple Extended USB Keyboard, rev 1.10/1.11, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Alps Electric Apple Extended USB Keyboard, rev 1.10/1.11, addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub1 port 2 configuration 1 interface 0
uhidev2: Kensington Kensington PocketMouse Pro, rev 1.10/1.00, addr 4, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub2 at usb1
uhub2: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
mpcpcibr2 at mainbus0: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x01: irq 41, address [_MAC_XXXXXXXXXX]
bmtphy0 at gem0 phy 0: BCM5201 10/100 media interface, rev. 2
bootpath: `/pci@f2000000/mac-io@17/ata-4@1f000/disk@0/bsd`
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02