Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-01-26 15:47:10
From: lorvax
Description: Toshiba Satellite A10 laptop running NetBSD 2.0
NetBSD 2.0 (BOFH) #0: Mon Jan 24 12:27:03 UTC 2005 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/BOFH total memory = 238 MB avail memory = 227 MB BIOS32 rev. 0 found at 0xfc03d PCI BIOS rev. 2.1 found at 0xfd317 pcibios: config mechanism [1][x], special cycles [x][x], last bus 3 PCI IRQ Routing Table rev. 1.0 found at 0xf01a0, size 128 bytes (6 entries) PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX) compatible) ------------------------------------------ device vendor product pin PIRQ IRQ stage ------------------------------------------ 000:02:0 0x8086 0x3582 A 0x00 10 0 already assigned 000:29:0 0x8086 0x24c2 A 0x00 10 0 already assigned 000:29:7 0x8086 0x24cd D 0x07 11 0 fixed up 000:31:1 0x8086 0x24ca A 0x02 11 0 already assigned 000:31:5 0x8086 0x24c5 B 0x01 11 0 fixed up 000:31:6 0x8086 0x24c6 B 0x01 11 0 fixed up 001:08:0 0x8086 0x103d A 0x04 11 0 already assigned 001:11:0 0x1179 0x0617 A 0x03 11 0 fixed up ------------------------------------------ PCI fixup examining 8086:3580 PCI fixup examining 8086:3584 PCI fixup examining 8086:3585 PCI fixup examining 8086:3582 PCI fixup examining 8086:3582 PCI fixup examining 8086:24c2 PCI fixup examining 8086:24cd PCI fixup examining 8086:2448 PCI fixup examining 8086:103d PCI fixup examining 1179:617 PCI bridge 1: primary 1, secondary 2, subordinate 2 PCI bridge 0: primary 0, secondary 1, subordinate 2 PCI fixup examining 8086:24cc PCI fixup examining 8086:24ca PCI fixup examining 8086:24c5 PCI fixup examining 8086:24c6 PCI bus #2 is the last bus [System BIOS Setting]----------------------- device vendor product register space address size -------------------------------------------- 000:00:0 0x8086 0x3580 [OK] 000:00:1 0x8086 0x3584 [OK] 000:00:3 0x8086 0x3585 [OK] 000:02:0 0x8086 0x3582 10h mem 0xd8000000 0x08000000 14h mem 0xd0000000 0x00080000 18h port 0x0000eff8 0x00000008 [OK] 000:02:1 0x8086 0x3582 10h mem 0x00000000 0x08000000 14h mem 0x00000000 0x00080000 [NG] 000:29:0 0x8086 0x24c2 20h port 0x0000cfe0 0x00000020 [OK] 000:29:7 0x8086 0x24cd 10h mem 0x00000000 0x00000400 [NG] 000:30:0 0x8086 0x2448 [OK] 000:31:0 0x8086 0x24cc [OK] 000:31:1 0x8086 0x24ca 10h port 0x0000bff8 0x00000008 14h port 0x0000bff4 0x00000004 18h port 0x0000bfe8 0x00000008 1ch port 0x0000bfe4 0x00000004 20h port 0x0000bfa0 0x00000010 24h mem 0x00000000 0x00000400 [NG] 000:31:5 0x8086 0x24c5 10h port 0x00000000 0x00000100 14h port 0x00000000 0x00000040 18h mem 0x00000000 0x00000200 1ch mem 0x00000000 0x00000100 [NG] 000:31:6 0x8086 0x24c6 10h port 0x00000000 0x00000100 14h port 0x00000000 0x00000080 [NG] 001:08:0 0x8086 0x103d 10h mem 0xcffff000 0x00001000 14h port 0x0000cf40 0x00000040 [OK] 001:11:0 0x1179 0x0617 10h mem 0x00000000 0x00001000 [NG] --------------------------[ 6 devices bogus] Physical memory end: 0x0ef3c000 PCI memory mapped I/O space start: 0x0f000000 [PCIBIOS fixup stage]----------------------- device vendor product register space address size -------------------------------------------- 000:00:0 0x8086 0x3580 [OK] 000:00:1 0x8086 0x3584 [OK] 000:00:3 0x8086 0x3585 [OK] 000:02:0 0x8086 0x3582 10h mem 0xd8000000 0x08000000 14h mem 0xd0000000 0x00080000 18h port 0x0000eff8 0x00000008 [OK] 000:02:1 0x8086 0x3582 10h mem 0x10000000 0x08000000 14h mem 0x0f000000 0x00080000 [OK] 000:29:0 0x8086 0x24c2 20h port 0x0000cfe0 0x00000020 [OK] 000:29:7 0x8086 0x24cd 10h mem 0x0f080000 0x00000400 [OK] 000:30:0 0x8086 0x2448 [OK] 000:31:0 0x8086 0x24cc [OK] 000:31:1 0x8086 0x24ca 10h port 0x0000bff8 0x00000008 14h port 0x0000bff4 0x00000004 18h port 0x0000bfe8 0x00000008 1ch port 0x0000bfe4 0x00000004 20h port 0x0000bfa0 0x00000010 24h mem 0x0f080400 0x00000400 [OK] 000:31:5 0x8086 0x24c5 10h port 0x00005800 0x00000100 14h port 0x00005900 0x00000040 18h mem 0x0f080800 0x00000200 1ch mem 0x0f080a00 0x00000100 [OK] 000:31:6 0x8086 0x24c6 10h port 0x00005a00 0x00000100 14h port 0x00005980 0x00000080 [OK] 001:08:0 0x8086 0x103d 10h mem 0xcffff000 0x00001000 14h port 0x0000cf40 0x00000040 [OK] 001:11:0 0x1179 0x0617 10h mem 0x0f081000 0x00001000 [OK] --------------------------[ 0 devices bogus] mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Mobile Celeron (686-class), 1995.11 MHz, id 0xf29 cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR> cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX> cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way cpu0: ITLB 4K/4M: 128 entries cpu0: DTLB 4K/4M: 64 entries pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82855GM Host-to-Hub Controller (rev. 0x01) agp0 at pchb0: detected 16252k stolen memory agp0: aperture at 0xd8000000, size 0x8000000 Intel 82855GM GMCH Memory Controller (miscellaneous system, revision 0x01) at pci0 dev 0 function 1 not configured Intel 82855GM GMCH Configuration Process (miscellaneous system, revision 0x01) at pci0 dev 0 function 3 not configured vga1 at pci0 dev 2 function 0: Intel 82855GM GMCH Integrated Graphics Device (rev. 0x01) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 Intel 82855GM GMCH Integrated Graphics Device (miscellaneous display, revision 0x01) at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0: Intel 82801DB/DBM USB UHCI Controller #1 (rev. 0x03) uhci0: interrupting at irq 10 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7: Intel 82801DB/DBM USB EHCI Controller (rev. 0x03) ehci0: interrupting at irq 11 ehci0: EHCI version 1.0 ehci0: wrong number of companions (3 != 1) ehci0: init failed, error=13 ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x83) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE (MOB) Network Controller, rev 131 fxp0: interrupting at irq 11 fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cbb0 at pci1 dev 11 function 0: Toshiba ToPIC100 CardBus-PCI Bridge (rev. 0x33) cbb0: interrupting at irq 11 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 2 device 0 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 pcib0: Intel 82801DB ISA Bridge (rev. 0x03) piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at irq 15 atabus1 at piixide0 channel 1 auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio auich0: interrupting at irq 11 auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo auich0: ac97: ext id 601<AC97_22,AMAP,VRA> Intel 82801DB/DBM AC97 Modem Controller (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 isapnp0: no ISA Plug `n Play devices found apm0 at mainbus0: Power Management spec V1.2 auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz audio0 at auich0: full duplex, mmap, independent Kernelized RAIDframe activated IPsec: Initialized Security Association Processing. wd0 at atabus0 drive 0: <HITACHI_DK23EA-30> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R2412, 834G807574, 1330> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)