Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-02-22 08:22:32
From: giupil
Description: Acer_Aspire_1513lmi/5-stable+patches
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Thu Feb 10 15:27:19 CET 2005
[_EMAIL_XXXXXXX]:/usr/obj/usr/src/sys/LUCIFER
ACPI APIC Table: <NVIDIA NV_APIC_>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon 64 Processor 3400+ (2194.35-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 1073152000 (1023 MB)
avail memory = 1026195456 (978 MB)
ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
ACPI-0377: *** Info: Table [DSDT] replaced by host OS
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x25> port 0x66,0x62 on acpi0
acpi_ec0: can`t allocate data port
device_attach: acpi_ec0 attach returned 6
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x25> port 0x66,0x62 on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce3 USB Controller> mem 0xd0000000-0xd0000fff irq 20 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <nVidia nForce3 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: Generic USB Mass Storage Device, rev 1.10/1.92, addr 2
ohci1: <nVidia nForce3 USB Controller> mem 0xd0001000-0xd0001fff irq 20 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <nVidia nForce3 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0004000-0xd00040ff irq 21 at device 2.2 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
pcm0: <nVidia nForce3> port 0x1c00-0x1c7f,0x1400-0x14ff mem 0xd0002000-0xd0002fff irq 22 at device 6.0 on pci0
pcm0: <Unknown AC97 Codec (id = 0x414c4752)>
pci0: <simple comms> at device 6.1 (no driver attached)
atapci0: <nVidia nForce3 UDMA133 controller> port 0x2080-0x208f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xd0100000-0xd010ffff irq 19 at device 6.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
cbb0: <TI4510 PCI-CardBus Bridge> mem 0xd0116000-0xd0116fff irq 18 at device 7.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xd0110000-0xd0113fff,0xd0117000-0xd01177ff irq 17 at device 7.1 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:d0:53
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <network> at device 8.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib2
acpi_video0: <ACPI video extension> mem 0xe0000000-0xefffffff,0xd1000000-0xd1ffffff irq 19 at device 0.0 on pci1
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2194349876 Hz quality 800
Timecounters tick every 1.000 msec
cpu0: Px state: P0, 2200MHz, 81500mW, 100us, 9us
cpu0: Px state: P1, 2000MHz, 64000mW, 100us, 9us
cpu0: Px state: P2, 1800MHz, 47000mW, 100us, 9us
cpu0: Px state: P3, 800MHz, 19000mW, 100us, 9us
cpu0: Px method: AMD K8 Cool`n`Quiet
ad0: 57231MB <TOSHIBA MK6025GAS/KA200A> [116280/16/63] at ata0-master UDMA100
umass0: at uhub0 port 3 (addr 2) disconnected
umass0: detached
umass0: Generic USB Mass Storage Device, rev 1.10/1.92, addr 2
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: DVDR <QSI DVDRW SDW-042/DX70> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI DVDRW SDW-042 DX70> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic Flash R/W 2002> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad0s2a
Accounting enabled