Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2005-04-25 12:22:30
From: firebaugh
Description: FreeBSD 5.4-RC3 Sun Ultra450
stray vector interrupt 2029
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC3 #0: Sun Apr 17 22:09:27 UTC 2005
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
real memory  = 1073741824 (1024 MB)
avail memory = 1035132928 (987 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
cpu2: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
cpu3: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
nexus0: <Open Firmware Nexus device>
nexus0: <associations>, type (unknown) (no driver attached)
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
auxio0: <Sun Auxiliary I/O> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 2034,2021 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 2018 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 2023 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: [_HOSTID_XXXXX]
ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,envctrl> addr 0x1400600000-0x1400600003 irq 2021,2024 (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 2020,2019 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: [_MAC_XXXXXXXXXX]
sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff at device 2.0 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
pci1: <OFW PCI bus> on pcib1
nexus0: <mc>, type memory-controller (no driver attached)
nexus0: <SUNW,afb>, type display (no driver attached)
pcib2: <U2P UPA-PCI bridge> on nexus0
pcib2: Psycho, impl 0, version 4, ign 0x100, bus B
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib2 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCI-PCI bridge> at device 4.0 on pci2
pci3: <OFW PCI bus> on pcib3
pci3: <bridge> at device 0.0 (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem 0x4000000-0x4007fff at device 0.1 on pci3
pcib2: guessing interrupt 25 for device 4/0 pin 2
miibus1: <MII bus> on hme1
nsphy1: <DP83840 10/100 media interface> on miibus1
nsphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: [_MAC_XXXXXXXXXX]
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1000-0x10ff mem 0x4008000-0x4008fff at device 4.0 on pci3
pcib2: guessing interrupt 24 for device 4/0 pin 1
isp0: invalid NVRAM header
pcib4: <U2P UPA-PCI bridge> on nexus0
pcib4: Psycho, impl 0, version 4, ign 0x100, bus A
pci4: <OFW PCI bus> on pcib4
pcib5: <U2P UPA-PCI bridge> on nexus0
pcib5: Psycho, impl 0, version 4, ign 0x180, bus B
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib5 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci5: <OFW PCI bus> on pcib5
pcib6: <U2P UPA-PCI bridge> on nexus0
pcib6: Psycho, impl 0, version 4, ign 0x180, bus A
pci6: <OFW PCI bus> on pcib6
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
da0 at sym0 bus 0 target 0 lun 0
da0: <FUJITSU MAB3091S SUN9.0G 1705> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da1 at sym0 bus 0 target 1 lun 0
da1: <FUJITSU MAB3091S SUN9.0G 1705> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
cd0 at sym1 bus 0 target 6 lun 0
cd0: <TOSHIBA XM5701TASUN12XCD 2395> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/da0a