Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-06-03 10:26:37
From: Chris Buechler
Description: Compaq Proliant 8500, quad PIII Xeon 550 MHz, 2 GB RAM, Compaq RAID
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Mon Jun 21 11:29:31 EDT 2004
root@:/usr/obj/usr/src/sys/SERV
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (550.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147450880 (2097120K bytes)
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 2085810176 (2036924K bytes)
Changing APIC ID for IO APIC #0 from 8 to 0 in MP table
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 7, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 4, version: 0x00040011, at 0xfee00000
cpu2 (AP): apic id: 5, version: 0x00040011, at 0xfee00000
cpu3 (AP): apic id: 6, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 0, version: 0x00220011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc054b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc054b09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 23 -> irq 2
IOAPIC #0 intpin 26 -> irq 5
IOAPIC #0 intpin 24 -> irq 9
pci0: <PCI bus> on pcib0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x2000-0x203f irq 2 at device 1.0 on pci0
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <DEC 21154 PCI-PCI bridge> at device 3.0 on pci0
pci1: <PCI bus> on pcib3
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x3000-0x301f mem 0xf7d00000-0xf7dfffff,0xf4ff0000-0xf4ff0fff irq 11 at device 4.0 on pci1
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82558 Pro/100 Ethernet> port 0x3020-0x303f mem 0xf7c00000-0xf7cfffff,0xf4fe0000-0xf4fe0fff irq 11 at device 5.0 on pci1
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
inphy1: <i82555 10/100 media interface> on miibus2
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f7) at 11.0 irq 5
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 12.0
pci0: <ATI Mach64-GV graphics accelerator> at 13.0
ida0: <Compaq Integrated Array controller> port 0x2800-0x28ff mem 0xf5000000-0xf5ffffff,0xf6000000-0xf6ffffff irq 9 at device 14.0 on pci0
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 52079MB (106659360 sectors), blocksize=512
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x118c, dev=0x1117) at 20.0
pci0: <unknown card> (vendor=0x118c, dev=0x1117) at 20.1
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ1608 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
acd0: CDROM <CD-224E> at ata0-master BIOSPIO
Mounting root from ufs:/dev/idad0s1a