Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-11-07 12:53:24
From: Trish Lynch
Description: Dual 400Mhz UltraSparc E250, FreeBSD 6.0-STABLE
Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-STABLE #0: Sun Nov 6 15:32:38 EST 2005 [_EMAIL_XXXXXXXXXXXXX]:/usr/obj/usr/src/sys/ULTRA_NEW real memory = 536870912 (512 MB) avail memory = 510320640 (486 MB) cpu0: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU) cpu1: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs nexus0: <Open Firmware Nexus device> nexus0: <associations>, type (unknown) (no driver attached) pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0: [FAST] initializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz quality 100 pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff pci0: <OFW PCI bus> on pcib0 ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff,0x71000000-0x717fffff at device 1.0 on pci0 auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072 c003,0x140072f000-0x140072f003 on ebus0 ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0 uart0: <SAB 82532 v3.2, channel A> on puc0 uart0: CTS oflow uart0: console (9600,n,8,1) uart1: <SAB 82532 v3.2, channel B> on puc0 uart1: CTS oflow puc1: <Siemens SAB 82532 dual channel SCC> addr 0x1400200000-0x140020007f irq 35 on ebus0 uart2: <SAB 82532 v3.2, channel A> on puc1 uart2: CTS oflow uart3: <SAB 82532 v3.2, channel B> on puc1 uart3: CTS oflow uart4: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0 uart4: keyboard (1200,n,8,1) uart4: keyboard not present ebus0: <su> addr 0x14003062f8-0x14003062ff irq 33 (no driver attached) ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x1400700000-0x140070000f irq 33 (no driver attached) eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: [_HOSTID_XXXXX] ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 40,37 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x10100000-0x10107fff at device 1.1 on pci0 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: [_MAC_XXXXXXXXXX] sym0: <875> port 0x1000-0x10ff mem 0x10108000-0x101080ff,0x1010a000-0x1010afff at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: [GIANT-LOCKED] sym1: <875> port 0x1400-0x14ff mem 0x1010c000-0x1010c0ff,0x1010e000-0x1010efff at device 3.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: [GIANT-LOCKED] sym2: <875> port 0x1800-0x18ff mem 0x10110000-0x101100ff,0x10112000-0x10112fff at device 2.0 on pci0 sym2: No NVRAM, ID 7, Fast-20, SE, parity checking sym2: [GIANT-LOCKED] sym3: <875> port 0x1c00-0x1cff mem 0x10114000-0x101140ff,0x10116000-0x10116fff at device 2.1 on pci0 sym3: No NVRAM, ID 7, Fast-20, SE, parity checking sym3: [GIANT-LOCKED] pcib1: <OFW PCI-PCI bridge> at device 4.0 on pci0 pci1: <OFW PCI bus> on pcib1 pci1: <bridge> at device 0.0 (no driver attached) hme1: <Sun HME 10/100 Ethernet> mem 0x4000000-0x4007fff at device 0.1 on pci1 miibus1: <MII bus> on hme1 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme1: Ethernet address: [_MAC_XXXXXXXXXX] pci1: <bridge> at device 1.0 (no driver attached) hme2: <Sun HME 10/100 Ethernet> mem 0x8000000-0x8007fff at device 1.1 on pci1 miibus2: <MII bus> on hme2 ukphy1: <Generic IEEE 802.3u media interface> on miibus2 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme2: Ethernet address: [_MAC_XXXXXXXXXX] pci1: <bridge> at device 2.0 (no driver attached) hme3: <Sun HME 10/100 Ethernet> mem 0xc000000-0xc007fff at device 2.1 on pci1 miibus3: <MII bus> on hme3 ukphy2: <Generic IEEE 802.3u media interface> on miibus3 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme3: Ethernet address: [_MAC_XXXXXXXXXX] hme4: <Sun HME 10/100 Ethernet> mem 0x10000000-0x10007fff at device 3.1 on pci1 miibus4: <MII bus> on hme4 ukphy3: <Generic IEEE 802.3u media interface> on miibus4 ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme4: Ethernet address: [_MAC_XXXXXXXXXX] pcib2: <U2P UPA-PCI bridge> on nexus0 pcib2: Psycho, impl 0, version 4, ign 0x7c0, bus A pci2: <OFW PCI bus> on pcib2 nexus0: <rsc>, type system-service-processor (no driver attached) nexus0: <mc>, type memory-controller (no driver attached) nexus0: <syscons>, type (unknown) (no driver attached) Timecounters tick every 1.000 msec IP Filter: v4.1.8 initialized. Default = pass all, Logging = disabled ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging disabled Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! da0 at sym0 bus 0 target 0 lun 0 da0: <CSC 73GB 10K REFURBISHED 0102> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) da2 at sym0 bus 0 target 9 lun 0 da2: <IBM DDYST1835SUN18G S94N> Fixed Direct Access SCSI-3 device da2: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da2: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da3 at sym0 bus 0 target 10 lun 0 da3: <IBM DDYST1835SUN18G S94N> Fixed Direct Access SCSI-3 device da3: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da3: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at sym0 bus 0 target 8 lun 0 da1: <SEAGATE ST39204LCSUN9.0G 4207> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da4 at sym0 bus 0 target 11 lun 0 da4: <IBM DDYST1835SUN18G S94N> Fixed Direct Access SCSI-3 device da4: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da4: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da5 at sym0 bus 0 target 12 lun 0 da5: <IBM DDYST1835SUN18G S94N> Fixed Direct Access SCSI-3 device da5: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da5: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) cd0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA DVD-ROM SD-M1401 1007> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 16) cd0: cd present [1243544 x 512 byte records] Trying to mount root from ufs:/dev/da0a