Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2006-04-17 04:48:56
From: Kjep
Description: Athlon 64 3000+, Abit AV8, onboard NIC not detected, using 2 PCI cards
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #16: Wed Aug 24 01:53:30 CEST 2005
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/i386/compile/MERLIN
Preloaded elf kernel /boot/kernel/kernel at 0xc08d4000.
Preloaded elf module /boot/kernel/acpi.ko at 0xc08d41f4.
ACPI APIC Table: <VIAK8T AWRDACPI>
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1838.80-MHz 686-class CPU)
Origin = AuthenticAMD Id = 0x20ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
real memory = 1072627712 (1022 MB)
avail memory = 1032495104 (984 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIAK8T AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fc6a0
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTB is routed to irq 20
agp0: <VIA Generic host to PCI bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
fwohci0: <VIA VT6306> port 0xdc00-0xdc7f mem 0xf9200000-0xf92007ff irq 23 at device 7.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:6a:70
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xc000-0xc0ff mem 0xf9201000-0xf9201fff irq 16 at device 8.0 on pci0
sis0: Silicon Revision: DP83815D
sis0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xe200-0xe23f mem 0xf9000000-0xf90fffff,0xf9205000-0xf9205fff irq 17 at device 9.0 on pci0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 10.0 (no driver attached)
pci0: <network, ethernet> at device 14.0 (no driver attached)
atapci0: <VIA 8237 SATA150 controller> port 0xcc00-0xccff,0xdb00-0xdb0f,0xda00-0xda03,0xd900-0xd907,0xd800-0xd803,0xe300-0xe307 irq
20 at device 15.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xe300 on atapci0
ata2: [MPSAFE]
ata3: at 0xd900 on atapci0
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0xdd00-0xdd0f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xde00-0xde1f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdf00-0xdf1f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe100-0xe11f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC658 AC97 Codec>
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5 drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter TSC frequency 1838801747 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by defaul
t
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
GEOM: create disk ad0 dp=0xc6aa0260
ad0: 29325MB <Maxtor 6E030L0> [59582/16/63] at ata0-master UDMA133
GEOM: create disk ad2 dp=0xc6aa0860
ad2: 76319MB <ST380021A> [155061/16/63] at ata1-master UDMA100
GEOM: create disk ad3 dp=0xc6aa0a60
ad3: 114473MB <ST3120023A> [232581/16/63] at ata1-slave UDMA100
Mounting root from ufs:/dev/ad0s1a
sis0: Applying short cable fix (reg=1)
sis0: Applying short cable fix (reg=e8)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=2, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=3, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
firewire0: New S400 device ID:0010b92100108ea1
GEOM: create disk da0 dp=0xc9e94050
da0 at sbp0 bus 0 target 0 lun 0
da0: <Maxtor OneTouch II 030d> Fixed Direct Access SCSI-4 device
da0: 50.000MB/s transfers, Tagged Queueing Enabled
da0: 194481MB (398297088 512 byte sectors: 255H 63S/T 24792C)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=4, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)