Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2007-01-29 10:31:42
From: complex
Description: IBM x3455
Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/SMP Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 2216 (2394.02-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x40f12 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> Cores per package: 2 real memory = 2146435072 (2047 MB) avail memory = 2095321088 (1998 MB) ACPI APIC Table: <BRCM EXPLOSN > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard kbd1 at kbdmux0 ath_hal:[_IP_XXX] (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <BRCM EXPLOSN> on motherboard acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) acpi_bus_number: cant get _ADR acpi_bus_number: cant get _ADR acpi_bus_number: cant get _ADR acpi_bus_number: cant get _ADR acpi_bus_number: cant get _ADR acpi_bus_number: cant get _ADR unknown: I/O range not supported Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xd8200000-0xd820ffff irq 18 at device 1.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: [_MAC_XXXXXXXXXX] bge1: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xd8210000-0xd821ffff irq 17 at device 1.1 on pci2 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: [_MAC_XXXXXXXXXX] atapci0: <ServerWorks HT1000 SATA150 controller> port 0x3040-0x3047,0x3034-0x3037,0x3038-0x303f,0x3030-0x3033,0x3000-0x301f mem 0xd8300000-0xd8301fff irq 7 at device 14.0 on pci1 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 2.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xd8511000-0xd8511fff irq 10 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xd8512000-0xd8512fff irq 10 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xd8513000-0xd8513fff irq 10 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered uhub3: vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 2 uhub3: multiple transaction translators uhub3: 4 ports with 4 removable, self powered ukbd0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 3, iclass 3/1 kbd2 at ukbd0 pci0: <display, VGA> at device 5.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 23 at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 22 at device 8.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 21 at device 9.0 on pci0 pci6: <ACPI PCI bus> on pcib6 mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xd8410000-0xd8413fff,0xd8400000-0xd840ffff irq 21 at device 0.0 on pci6 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.13.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0xb mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required). pcib7: <ACPI PCI-PCI bridge> irq 20 at device 10.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI Host-PCI bridge> on acpi0 pci128: <ACPI PCI bus> on pcib8 acpi_button0: <Power Button> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDRW <DW-225/2.6A> at ata0-master UDMA33 da0 at mpt0 bus 0 target 16 lun 0 da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 69618MB (142577664 512 byte sectors: 255H 63S/T 8875C) SMP: AP CPU #1 Launched!