Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2007-02-07 03:39:17
From: Royce
Description: Sun Ultra 30 A16-RFB
stray vector interrupt 2029
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 23:30:59 UTC 2007
Timecounter tick frequency 295997015 Hz quality 1000
real memory  = 536870912 (512 MB)
avail memory = 506445824 (482 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
ath_hal:[_IP_XXX] (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
pcib0: [FAST]
pcib0: [FAST]
pcib0: [FAST]
initializing counter-timer
Timecounter counter-timer frequency 1000000 Hz quality 100
pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff,0x71000000-0x717fffff at device 1.0 on pci0
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: keyboard (1200,n,8,1)
uart2: keyboard not present
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: [_HOSTID_XXXXX]
ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 1.1 on pci0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: [_MAC_XXXXXXXXXX]
sym0: <875> port 0x1000-0x10ff mem 0x108000-0x1080ff,0x10a000-0x10afff at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
pcib1: [FAST]
pci1: <OFW PCI bus> on pcib1
creator0: <Creator3D> on nexus0
creator0: resolution 1152x900
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x100>
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TOSHIBA XM5701TASUN12XCD 2395> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST34371W SUN4.2G 7462> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371W SUN4.2G 7462> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
Trying to mount root from ufs:/dev/da0a