Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2007-02-17 10:29:41
From: bienc
Description: Compaq Presario M2000
OpenBSD 4.1-beta (GENERIC) #1374: Thu Feb 15 21:44:42 MST 2007
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Sempron(tm) Processor 2800+ (AuthenticAMD 686-class, 256KB L2 cache) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD erratum 89 present, BIOS upgrade may be required
real mem  = 1206415360 (1178140K)
avail mem = 1090482176 (1064924K)
using 4256 buffers containing 60444672 bytes (59028K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/09/05, BIOS32 rev. 0 @ 0xfd660, SMBIOS rev. 2.31 @ 0xdc010 (18 entries)
bios0: Hewlett-Packard Presario M2000 (EE504PA#ABG)
pcibios0 at bios0: rev 2.1 @ 0xfd660/0x9a0
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xdc000/0x4000! 0xe0000/0x4000!
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: PowerNow! K8 1592 MHz: speeds: 1600 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 ATI RS480 Host rev 0x01
ppb0 at pci0 dev 1 function 0 ATI RS480 PCIE rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 ATI Radeon XPRESS 200M rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 19 function 0 ATI IXP400 USB rev 0x00: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 ATI IXP400 USB rev 0x00: irq 11, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 ATI IXP400 USB2 rev 0x00: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
piixpm0 at pci0 dev 20 function 0 ATI IXP400 SMBus rev 0x11: SMI
iic0 at piixpm0
pciide0 at pci0 dev 20 function 1 ATI IXP400 IDE rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400UE-22HCT0>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-C, A.8C> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 ATI IXP400 ISA rev 0x00
ppb1 at pci0 dev 20 function 4 ATI IXP400 PCI rev 0x00
pci2 at ppb1 bus 5
rl0 at pci2 dev 0 function 0 Realtek 8139 rev 0x10: irq 5, address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal PHY
Broadcom BCM4318 rev 0x02 at pci2 dev 2 function 0 not configured
cbb0 at pci2 dev 9 function 0 TI PCI7XX1 CardBus rev 0x00: irq 10
TI PCI7XX1 FireWire rev 0x00 at pci2 dev 9 function 2 not configured
TI PCI7XX1 Flash rev 0x00 at pci2 dev 9 function 3 not configured
sdhc0 at pci2 dev 9 function 4 TI PCI7XX1 Secure Data rev 0x00: irq 10
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5 ATI IXP400 AC97 rev 0x02: irq 10
auixp0: soft resetting aclink
ATI IXP400 Modem rev 0x02 at pci0 dev 20 function 6 not configured
pchb1 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00
pchb2 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00
pchb3 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00
pchb4 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efdd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
ugen0 at uhub2 port 2
ugen0: Leadtek product 0x6025, rev 2.00/0.01, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x43585430 (Conexant CX?????)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auixp0