Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2007-08-01 10:54:53
From: complex
Description: Sun x4200 M2
Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT-200706 #0: Sun Jun 3 18:41:02 UTC 2007 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. ACPI APIC Table: <SUN X4200 M2> Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 2220 (2792.59-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x40f13 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 real memory = 3758030848 (3583 MB) avail memory = 3669897216 (3499 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic1: Changing APIC ID to 6 ioapic1: WARNING: intbase 48 != expected base 24 ioapic2: Changing APIC ID to 7 ioapic2: WARNING: intbase 56 != expected base 55 ioapic3: Changing APIC ID to 5 ioapic3: WARNING: intbase 24 != expected base 63 ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic3 <Version 1.1> irqs 24-47 on motherboard ioapic1 <Version 1.1> irqs 48-54 on motherboard ioapic2 <Version 1.1> irqs 56-62 on motherboard kbd1 at kbdmux0 ath_hal:[_IP_XXX] (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <SUN X4200 M2> on motherboard acpi0: [ITHREAD] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter HPET frequency 25000000 Hz quality 2000 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, dff00000 (3) failed Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe3ff000-0xfe3fffff irq 20 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 7 ports with 7 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfe3fec00-0xfe3fecff irq 21 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 7 ports with 7 removable, self powered atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem 0xfd000000-0xfdffffff,0xfe2ff000-0xfe2fffff irq 16 at device 3.0 on pci1 nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xdc00-0xdc07 mem 0xfe3fd000-0xfe3fdfff irq 22 at device 10.0 on pci0 nve0: Ethernet address [_MAC_XXXXXXXXXX] miibus0: <MII bus> on nve0 e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nve0: using obsoleted if_watchdog interface nve0: Ethernet address: [_MAC_XXXXXXXXXX] nve0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI Host-PCI bridge> on acpi0 pci128: <ACPI PCI bus> on pcib6 pci128: <memory> at device 0.0 (no driver attached) pci128: <memory> at device 1.0 (no driver attached) nve1: <NVIDIA nForce MCP9 Networking Adapter> port 0xfc00-0xfc07 mem 0xfeafe000-0xfeafefff irq 44 at device 10.0 on pci128 nve1: Ethernet address [_MAC_XXXXXXXXXX] miibus1: <MII bus> on nve1 e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nve1: using obsoleted if_watchdog interface nve1: Ethernet address: [_MAC_XXXXXXXXXX] nve1: [ITHREAD] pcib7: <ACPI PCI-PCI bridge> at device 11.0 on pci128 pci129: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 12.0 on pci128 pci130: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 13.0 on pci128 pci131: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 14.0 on pci128 pci132: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 16.0 on pci128 pci133: <ACPI PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 17.0 on pci128 pci134: <ACPI PCI bus> on pcib12 em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xec00-0xec3f mem 0xfe9e0000-0xfe9fffff irq 56 at device 1.0 on pci134 em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: [FILTER] em1: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xe800-0xe83f mem 0xfe9c0000-0xfe9dffff irq 57 at device 1.1 on pci134 em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: [FILTER] mpt0: <LSILogic SAS/SATA Adapter> port 0xe400-0xe4ff mem 0xfe9bc000-0xfe9bffff,0xfe9a0000-0xfe9affff irq 58 at device 2.0 on pci134 mpt0: [ITHREAD] mpt0: MPI Version=1.5.13.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcb7ff,0xcb800-0xcc7ff,0xcc800-0xcd7ff,0xd3800-0xd47ff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0 kbd2 at ukbd0 ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 1.10/1.00, addr 3> on uhub0 umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 1.10/1.00, addr 4> on uhub0 Timecounters tick every 1.000 msec md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0c930c8 acd0: CDRW <DW-224SL-R/1.0A> at ata0-master UDMA33 GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install. da0 at mpt0 bus 0 target 2 lun 0 da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 139236MB (285155328 512 byte sectors: 255H 63S/T 17750C) SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! da1 at umass-sim1 bus 1 target 0 lun 0 da1: <AMI Virtual Floppy 1.00> Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <AMI Virtual CDROM 1.00> Removable CD-ROM SCSI-0 device cd0: 1.000MB/s transfers cd0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change, medium may have changed Trying to mount root from ufs:/dev/md0 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/20.10, addr 5> on uhub0 ums0: 16 buttons and Z dir. ums0: at uhub0 port 2 (addr 5) disconnected ums0: detached uhub2: <Chicony USB HUB with TrackPoint USB Keyboard, class 9/0, rev 1.10/1.23, addr 5> on uhub0 uhub2: 4 ports with 2 removable, bus powered ukbd1: <Chicony USB TrackPoint Keyboard, class 0/0, rev 1.10/1.23, addr 6> on uhub2 kbd3 at ukbd1 uhid0: <Chicony USB TrackPoint Keyboard, class 0/0, rev 1.10/1.23, addr 6> on uhub2 ums0: <Chicony USB Trackpoint pointing device, class 0/0, rev 1.10/1.2c, addr 7> on uhub2 ums0: 3 buttons and Z dir. ukbd1: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 5> on uhub0 kbd3 at ukbd1 ums1: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 5> on uhub0 ums1: X report 0x0002 not supported device_attach: ums1 attach returned 6 umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 1.10/1.00, addr 6> on uhub0 umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 1.10/1.00, addr 7> on uhub0 Timecounters tick every 1.000 msec acd0: CDRW <DW-224SL-R/1.0A> at ata0-master UDMA33 da0 at mpt0 bus 0 target 2 lun 0 da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 139236MB (285155328 512 byte sectors: 255H 63S/T 17750C) SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! da1 at umass-sim1 bus 1 target 0 lun 0 da1: <AMI Virtual Floppy 1.00> Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <AMI Virtual CDROM 1.00> Removable CD-ROM SCSI-0 device cd0: 1.000MB/s transfers cd0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change, medium may have changed Trying to mount root from ufs:/dev/da0s1a