Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2007-09-21 16:29:49
From: Richard Bejtlich
Description: NextComputing NextDimension Pro
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200709 #0: Mon Sep 10 23:28:19 UTC 2007
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 275 HE (2210.20-MHz K8-class CPU)
Origin = AuthenticAMD Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
Cores per package: 2
usable memory = 4277608448 (4079 MB)
avail memory = 4116242432 (3925 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-30 on motherboard
ioapic2 <Version 1.1> irqs 28-34 on motherboard
kbd1 at kbdmux0
ath_hal:[_IP_XXX] (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfef0000 (3) failed
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`nQuiet K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`nQuiet K8> on cpu1
device_attach: powernow1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: waiting for BIOS to give up control
usb1: timed out waiting for BIOS
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xfe02d000-0xfe02dfff irq 23 at device 7.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 0xfe02c000-0xfe02cfff irq 21 at device 8.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xc400-0xc407 mem 0xfe02b000-0xfe02bfff irq 22 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: [_MAC_XXXXXXXXXX]
nfe0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8052 Gigabit Ethernet> port 0xac00-0xacff mem 0xfddfc000-0xfddfffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
msk0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on msk0
e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mskc1: <Marvell Yukon 88E8052 Gigabit Ethernet> port 0x8c00-0x8cff mem 0xfd9fc000-0xfd9fffff irq 19 at device 0.0 on pci4
msk1: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc1
msk1: Ethernet address: [_MAC_XXXXXXXXXX]
miibus2: <MII bus> on msk1
e1000phy2: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus2
e1000phy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc1: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci8: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci8
pci9: <ACPI PCI bus> on pcib7
3ware device driver for 9000 series storage controllers, version:[_IP_XXXXXX]
twa0: <3ware 9000 series Storage Controller> port 0x6c00-0x6c3f mem 0xdc000000-0xddffffff,0xdfdff000-0xdfdfffff irq 24 at device 12.0 on pci9
twa0: [GIANT-LOCKED]
twa0: [ITHREAD]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-4LP, 4 ports, Firmware FE9X[_IP_XXXXXX], BIOS BE9X[_IP_XXXXXX]
pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci8
pci10: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0x5c00-0x5cff mem 0xd0000000-0xd7ffffff,0xdfef0000-0xdfefffff irq 28 at device 1.0 on pci10
acpi_tz0: <Thermal Zone> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff,0xd4000-0xd57ff,0xd6000-0xd77ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 2> on uhub0
uhub2: 3 ports with 2 removable, bus powered
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 3> on uhub2
kbd2 at ukbd0
uhid0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 3> on uhub2
ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 4> on uhub0
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80c175c0
acd0: DVDR <Optiarc DVD RW AD-5540A/2.01> at ata0-master UDMA33
ad4: 152627MB <Seagate ST9160823AS 3.AAB> at ata2-master SATA150
ad6: 152627MB <Seagate ST9160823AS 3.AAB> at ata3-master SATA150
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9550SX-4LP DISK 3.04> Fixed Direct Access SCSI-3 device
da0: 100.000MB/s transfers
da0: 610308MB (1249910784 512 byte sectors: 255H 63S/T 77803C)
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
GEOM_LABEL: Label for provider ad4s1 is ext2fs//boot.
Trying to mount root from ufs:/dev/md0
GEOM_LABEL: Label ext2fs//boot removed.
Waiting (max 60 seconds) for system process `vnlru to stop...done
Waiting (max 60 seconds) for system process `bufdaemon to stop...done
Waiting (max 60 seconds) for system process `syncer to stop...
Syncing disks, vnodes remaining...7 5 0 0 0 done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200709 #0: Mon Sep 10 23:28:19 UTC 2007
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 275 HE (2210.20-MHz K8-class CPU)
Origin = AuthenticAMD Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
Cores per package: 2
usable memory = 4281802752 (4083 MB)
avail memory = 4120444928 (3929 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-30 on motherboard
ioapic2 <Version 1.1> irqs 28-34 on motherboard
kbd1 at kbdmux0
ath_hal:[_IP_XXX] (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfef0000 (3) failed
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`nQuiet K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`nQuiet K8> on cpu1
device_attach: powernow1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: waiting for BIOS to give up control
usb1: timed out waiting for BIOS
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xfe02d000-0xfe02dfff irq 23 at device 7.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 0xfe02c000-0xfe02cfff irq 21 at device 8.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xc400-0xc407 mem 0xfe02b000-0xfe02bfff irq 22 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: [_MAC_XXXXXXXXXX]
nfe0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8052 Gigabit Ethernet> port 0xac00-0xacff mem 0xfddfc000-0xfddfffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
msk0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on msk0
e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mskc1: <Marvell Yukon 88E8052 Gigabit Ethernet> port 0x8c00-0x8cff mem 0xfd9fc000-0xfd9fffff irq 19 at device 0.0 on pci4
msk1: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc1
msk1: Ethernet address: [_MAC_XXXXXXXXXX]
miibus2: <MII bus> on msk1
e1000phy2: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus2
e1000phy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc1: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci8: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci8
pci9: <ACPI PCI bus> on pcib7
3ware device driver for 9000 series storage controllers, version:[_IP_XXXXXX]
twa0: <3ware 9000 series Storage Controller> port 0x6c00-0x6c3f mem 0xdc000000-0xddffffff,0xdfdff000-0xdfdfffff irq 24 at device 12.0 on pci9
twa0: [GIANT-LOCKED]
twa0: [ITHREAD]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-4LP, 4 ports, Firmware FE9X[_IP_XXXXXX], BIOS BE9X[_IP_XXXXXX]
pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci8
pci10: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0x5c00-0x5cff mem 0xd0000000-0xd7ffffff,0xdfef0000-0xdfefffff irq 28 at device 1.0 on pci10
acpi_tz0: <Thermal Zone> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff,0xd4000-0xd57ff,0xd6000-0xd77ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 2> on uhub0
uhub2: 3 ports with 2 removable, bus powered
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 3> on uhub2
kbd2 at ukbd0
uhid0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 3> on uhub2
ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 4> on uhub0
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <Optiarc DVD RW AD-5540A/2.01> at ata0-master UDMA33
ad4: 152627MB <Seagate ST9160823AS 3.AAB> at ata2-master SATA150
ad6: 152627MB <Seagate ST9160823AS 3.AAB> at ata3-master SATA150
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9550SX-4LP DISK 3.04> Fixed Direct Access SCSI-3 device
da0: 100.000MB/s transfers
da0: 610308MB (1249910784 512 byte sectors: 255H 63S/T 77803C)
Trying to mount root from ufs:/dev/ad4s1a
nfe0: link state changed to UP