NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

---

Date: 2008-05-29 13:46:08
From: dotike
Description: Asus EEEPC, (snapshot install- ethernet working, wireless not working)

OpenBSD 4.3-current (RAMDISK_CD) #731: Tue May 27 09:39:46 MDT 2008
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) M processor 900MHz (GenuineIntel 686-class) 631 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 2138140672 (2039MB)
avail mem = 2061066240 (1965MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/17/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf06c0 (37 entries)
bios0: vendor American Megatrends Inc. version 0401 date 10/17/2007
bios0: ASUSTeK Computer INC. 701
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76a0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801FB LPC rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82915GM Host rev 0x04
vga1 at pci0 dev 2 function 0 Intel 82915GM Video rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
Intel 82915GM Video rev 0x04 at pci0 dev 2 function 1 not configured
Intel 82801FB HD Audio rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 Intel 82801FB PCIE rev 0x04: irq 5
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 Intel 82801FB PCIE rev 0x04: irq 11
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 Attansic Technology L2 rev 0xa0: irq 11, address [_MAC_XXXXXXXXXX]
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI 0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 Intel 82801FB PCIE rev 0x04: irq 10
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 Intel 82801FB USB rev 0x04: irq 7
uhci1 at pci0 dev 29 function 1 Intel 82801FB USB rev 0x04: irq 3
uhci2 at pci0 dev 29 function 2 Intel 82801FB USB rev 0x04: irq 10
uhci3 at pci0 dev 29 function 3 Intel 82801FB USB rev 0x04: irq 5
ppb3 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 Intel 82801FBM LPC rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 Intel 82801FBM SATA rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
Intel 82801FB SMBus rev 0x04 at pci0 dev 31 function 3 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 Intel UHCI root hub rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f7fd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
umass0 at uhub1 port 1 configuration 1 interface 0 Sony DRX-S70U rev 2.00/2.40 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7540A, 1.D3> SCSI0 5/cdrom removable
umass1 at uhub2 port 1 configuration 1 interface 0 ENE UB6225 rev 2.00/1.00 addr 2
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct removable
sd0: drive offline
root on rd0a swap on rd0b dump on rd0b
syncing disks... 
OpenBSD 4.3-current (GENERIC) #878: Tue May 27 09:18:05 MDT 2008
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz (GenuineIntel 686-class) 631 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 2138140672 (2039MB)
avail mem = 2059374592 (1963MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/17/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf06c0 (37 entries)
bios0: vendor American Megatrends Inc. version 0401 date 10/17/2007
bios0: ASUSTeK Computer INC. 701
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76a0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801FB LPC rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82915GM Host rev 0x04
vga1 at pci0 dev 2 function 0 Intel 82915GM Video rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
Intel 82915GM Video rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801FB HD Audio rev 0x04: irq 5
azalia0: codec[s]: Realtek/0x0662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801FB PCIE rev 0x04: irq 5
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 Intel 82801FB PCIE rev 0x04: irq 11
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 Attansic Technology L2 rev 0xa0: irq 11, address [_MAC_XXXXXXXXXX]
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI 0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 Intel 82801FB PCIE rev 0x04: irq 10
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 Intel 82801FB USB rev 0x04: irq 7
uhci1 at pci0 dev 29 function 1 Intel 82801FB USB rev 0x04: irq 3
uhci2 at pci0 dev 29 function 2 Intel 82801FB USB rev 0x04: irq 10
uhci3 at pci0 dev 29 function 3 Intel 82801FB USB rev 0x04: irq 5
ppb3 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 Intel 82801FBM LPC rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 Intel 82801FBM SATA rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 Intel 82801FB SMBus rev 0x04: irq 3
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 Intel UHCI root hub rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e7fd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
umass0 at uhub2 port 1 configuration 1 interface 0 ENE UB6225 rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct removable
sd0: drive offline
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
syncing disks... 
OpenBSD 4.3-current (GENERIC) #878: Tue May 27 09:18:05 MDT 2008
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz (GenuineIntel 686-class) 631 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 2138140672 (2039MB)
avail mem = 2059374592 (1963MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/17/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf06c0 (37 entries)
bios0: vendor American Megatrends Inc. version 0401 date 10/17/2007
bios0: ASUSTeK Computer INC. 701
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76a0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801FB LPC rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82915GM Host rev 0x04
vga1 at pci0 dev 2 function 0 Intel 82915GM Video rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
Intel 82915GM Video rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801FB HD Audio rev 0x04: irq 5
azalia0: codec[s]: Realtek/0x0662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801FB PCIE rev 0x04: irq 5
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 Intel 82801FB PCIE rev 0x04: irq 11
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 Attansic Technology L2 rev 0xa0: irq 11, address [_MAC_XXXXXXXXXX]
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI 0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 Intel 82801FB PCIE rev 0x04: irq 10
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 Intel 82801FB USB rev 0x04: irq 7
uhci1 at pci0 dev 29 function 1 Intel 82801FB USB rev 0x04: irq 3
uhci2 at pci0 dev 29 function 2 Intel 82801FB USB rev 0x04: irq 10
uhci3 at pci0 dev 29 function 3 Intel 82801FB USB rev 0x04: irq 5
ppb3 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 Intel 82801FBM LPC rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 Intel 82801FBM SATA rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 Intel 82801FB SMBus rev 0x04: irq 3
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 Intel UHCI root hub rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e7fd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
umass0 at uhub2 port 1 configuration 1 interface 0 ENE UB6225 rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct removable
sd0: drive offline
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
syncing disks... 
OpenBSD 4.3-current (GENERIC) #878: Tue May 27 09:18:05 MDT 2008
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz (GenuineIntel 686-class) 631 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 2138140672 (2039MB)
avail mem = 2059374592 (1963MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/17/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf06c0 (37 entries)
bios0: vendor American Megatrends Inc. version 0401 date 10/17/2007
bios0: ASUSTeK Computer INC. 701
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76a0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801FB LPC rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82915GM Host rev 0x04
vga1 at pci0 dev 2 function 0 Intel 82915GM Video rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
Intel 82915GM Video rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801FB HD Audio rev 0x04: irq 5
azalia0: codec[s]: Realtek/0x0662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801FB PCIE rev 0x04: irq 5
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 Intel 82801FB PCIE rev 0x04: irq 11
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 Attansic Technology L2 rev 0xa0: irq 11, address [_MAC_XXXXXXXXXX]
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI 0x001374, model 0x0002
ppb2 at pci0 dev 28 function 2 Intel 82801FB PCIE rev 0x04: irq 10
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 Intel 82801FB USB rev 0x04: irq 7
uhci1 at pci0 dev 29 function 1 Intel 82801FB USB rev 0x04: irq 3
uhci2 at pci0 dev 29 function 2 Intel 82801FB USB rev 0x04: irq 10
uhci3 at pci0 dev 29 function 3 Intel 82801FB USB rev 0x04: irq 5
ppb3 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 Intel 82801FBM LPC rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 Intel 82801FBM SATA rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 Intel 82801FB SMBus rev 0x04: irq 3
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 Intel UHCI root hub rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e7fd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
umass0 at uhub2 port 1 configuration 1 interface 0 ENE UB6225 rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct removable
sd0: drive offline
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.