Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2008-07-14 03:34:22
From: zam4ever
Description: Dell PowerEdge 6950
Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 [_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 8220 (2793.02-MHz K8-class CPU) Origin = AuthenticAMD Id = 0x40f13 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 usable memory = 4281061376 (4082 MB) avail memory = 4123639808 (3932 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic1: Changing APIC ID to 5 ioapic2: Changing APIC ID to 6 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 32-47 on motherboard ioapic2 <Version 1.1> irqs 64-79 on motherboard kbd1 at kbdmux0 ath_hal:[_IP_XXX] (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18) acpi0: <DELL PE_SC3> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter ACPI-safe frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter HPET frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 cpu2: <ACPI CPU> on acpi0 powernow2: <PowerNow! K8> on cpu2 cpu3: <ACPI CPU> on acpi0 powernow3: <PowerNow! K8> on cpu3 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci8: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci8 pci9: <ACPI PCI bus> on pcib2 atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8c0-0x8cf at device 2.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xe000-0xe0ff mem 0xee0ed000-0xee0edfff irq 11 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0xe400-0xe4ff mem 0xee0ee000-0xee0eefff irq 11 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0xe800-0xe8ff mem 0xee0ef000-0xee0effff irq 11 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered uhub3: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on uhub2 uhub3: multiple transaction translators uhub3: 2 ports with 2 removable, self powered uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 3> on uhub2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 4> on uhub4 ums0: 3 buttons and Z dir. ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 5> on uhub4 kbd2 at ukbd0 uhub5: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 6> on uhub2 uhub5: multiple transaction translators uhub5: 2 ports with 2 removable, self powered uhub6: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 7> on uhub5 uhub6: multiple transaction translators uhub6: 4 ports with 4 removable, self powered vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xe0000000-0xe7ffffff,0xee0f0000-0xee0fffff irq 44 at device 4.0 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 pci10: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 33 at device 8.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib5 bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xea000000-0xebffffff irq 33 at device 0.0 on pci5 miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: [_MAC_XXXXXXXXXX] bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x04000305); Flags( MFW MSI ) pcib6: <ACPI PCI-PCI bridge> irq 37 at device 9.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <PCI-PCI bridge> at device 0.0 on pci6 pci7: <PCI bus> on pcib7 bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xec000000-0xedffffff irq 37 at device 0.0 on pci7 miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce1: Ethernet address: [_MAC_XXXXXXXXXX] bce1: [ITHREAD] bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x04000305); Flags( MFW MSI ) pcib8: <ACPI PCI-PCI bridge> irq 35 at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib9 mfi0: <Dell PERC 5/i> mem 0xe80f0000-0xe80fffff,0xee2e0000-0xee2fffff irq 35 at device 14.0 on pci2 mfi0: Megaraid SAS driver Ver 2.00 mfi0: 1015 (269090568s/0x0020/0) - Shutdown command received from host mfi0: 1016 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f02: Firmware initialization started (PCI ID 0015/1028/1f02/1028) mfi0: 1017 (4278190080s/0x0020/0) - Type 18: Firmware version 1.03.40-0316 mfi0: 1018 (4278190146s/0x0008/0) - Battery Present mfi0: 1019 (4278190146s/0x0020/0) - Type 18: Package version 5.2.1-0066 mfi0: 1020 (4278190173s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES) discovered on PD 08(e1/s255) mfi0: 1021 (4278190173s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08(e1/s255) mfi0: 1022 (4278190173s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08, scsiType=d, portMap=00, sasAddr=5001e090cb57f100,0000000000000000 mfi0: 1023 (4278190174s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0) mfi0: 1024 (4278190174s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08, scsiType=0, portMap=01, sasAddr=5000cca005366479,0000000000000000 mfi0: 1025 (4278190174s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1) mfi0: 1026 (4278190174s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08, scsiType=0, portMap=02, sasAddr=5000cca005895ff9,0000000000000000 mfi0: 1027 (4278190174s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD 02(e1/s2) mfi0: 1028 (4278190174s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=5000cca0058aa4b5,0000000000000000 mfi0: 1029 (4278190174s/0x0002/0) - PD 03(e1/s3) event: Inserted: PD 03(e1/s3) mfi0: 1030 (4278190174s/0x0002/0) - Type 29: Inserted: PD 03(e1/s3) Info: enclPd=08, scsiType=0, portMap=08, sasAddr=5000cca0057a7db9,0000000000000000 mfi0: 1031 (4278190174s/0x0002/0) - PD 04(e1/s4) event: Inserted: PD 04(e1/s4) mfi0: 1032 (4278190174s/0x0002/0) - Type 29: Inserted: PD 04(e1/s4) Info: enclPd=08, scsiType=0, portMap=10, sasAddr=5000cca0058a3aad,0000000000000000 mfi0: 1033 (269090684s/0x0020/0) - Adapter ticks 269090684 elapsed 95s: Time established as 07/11/08 11:24:44; (95 seconds since power on) mfi0: 1034 (269090740s/0x0008/0) - Battery temperature is normal mfi0: 1035 (269090740s/0x0008/0) - Current capacity of the battery is above threshold mfi0: [ITHREAD] pcib10: <PCI-PCI bridge> at device 0.2 on pci1 pci3: <PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> irq 36 at device 11.0 on pci0 pci11: <ACPI PCI bus> on pcib11 pcib12: <ACPI Host-PCI bridge> on acpi0 pci32: <ACPI PCI bus> on pcib12 pcib13: <ACPI PCI-PCI bridge> irq 38 at device 7.0 on pci32 pci33: <ACPI PCI bus> on pcib13 pcib14: <ACPI PCI-PCI bridge> irq 39 at device 8.0 on pci32 pci34: <ACPI PCI bus> on pcib14 pcib15: <PCI-PCI bridge> mem 0xdfcfe000-0xdfcfffff irq 39 at device 0.0 on pci34 pci35: <PCI bus> on pcib15 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xdc00-0xdcff mem 0xdfec0000-0xdfedffff,0xdfee0000-0xdfefffff irq 39 at device 8.0 on pci35 mpt0: [ITHREAD] mpt0: MPI Version=1.2.14.0 pcib16: <ACPI PCI-PCI bridge> irq 43 at device 9.0 on pci32 pci36: <ACPI PCI bus> on pcib16 pcib17: <ACPI PCI-PCI bridge> irq 41 at device 10.0 on pci32 pci37: <ACPI PCI bus> on pcib17 pcib18: <ACPI PCI-PCI bridge> irq 42 at device 11.0 on pci32 pci38: <ACPI PCI bus> on pcib18 em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xccc0-0xccdf mem 0xdff80000-0xdff9ffff,0xdffa0000-0xdffbffff irq 42 at device 0.0 on pci38 em0: Using MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: [FILTER] em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xcce0-0xccff mem 0xdffc0000-0xdffdffff,0xdffe0000-0xdfffffff irq 42 at device 0.1 on pci38 em1: Using MSI interrupt em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xcc000-0xcc7ff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec hptrr: no controller detected. Waiting 5 seconds for SCSI devices to settle acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AE> at ata0-master UDMA33 mfid0: <MFI Logical Disk> on mfi0 mfid0: 285568MB (584843264 sectors) RAID volume is optimal mfid1: <MFI Logical Disk> on mfi0 mfid1: 571136MB (1169686528 sectors) RAID volume is optimal sa0 at mpt0 bus 0 target 6 lun 0 sa0: <IBM ULTRIUM-TD3 6B20> Removable Sequential Access SCSI-3 device sa0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit) SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/mfid0s1a