NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

---

Date: 2008-11-14 16:00:24
From: abs
Description: ASUS A8V Deluxe

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_STABLE (_ACPI_) #2: Sun Oct 12 18:54:51 BST 2008
        [_EMAIL_XXXXXXXXX]:/var/obj/i386/home/netbsd/4/sys/arch/i386/compile/_ACPI_
total memory = 1023 MB
rbus: rbus_min_start set to 0x40000000 
avail memory = 995 MB
timecounter: Timecounters tick every 0.976 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
SMBIOS rev. 2.3 @ 0xf0530 (68 entries) 
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon 64 or Sempron (686-class), 2202.93 MHz, id 0xff0
cpu0: features e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: AMD Athlon(tm) 64 Processor 3500+
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,08000716>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter ACPI-Fast frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type Processor (0x0c) at acpi0 not configured
ACPI Object Type Processor (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
spkr0 at pcppi1
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2 
fdc0: expected BUFFER, got 4
lpt0 at acpi0 (PNP0400-1)
lpt0: io 0x378-0x37f irq 7
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
com0 at acpi0 (PNP0501-2)
com0: io 0x2f8-0x2ff irq 3
com0: ns16550a, working fifo
com1 at acpi0 (PNP0501-1)
com1: io 0x3f8-0x3ff irq 4
com1: ns16550a, working fifo
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0282 (rev. 0x00)
agp0 at pchb0: aperture at 0xec000000, size 0xe900000
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1282 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2282 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3282 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4282 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7282 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x5446 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
fwohci0 at pci0 dev 7 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 16 (irq 11)
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:28:27 
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394 
fwohci0: Initiate bus reset
pdcsata0 at pci0 dev 8 function 0
pdcsata0: Promise PDC20378 SATA150 controller (rev. 0x02)
pdcsata0: interrupting at ioapic0 pin 18 (irq 5)
pdcsata0: bus-master DMA support present
atabus0 at pdcsata0 channel 0
atabus1 at pdcsata0 channel 1
atabus2 at pdcsata0 channel 2
bktr0 at pci0 dev 9 function 0
bktr0: interrupting at ioapic0 pin 16 (irq 11)
bktr0: Hauppauge Model 38105 B211
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner.
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x02) at pci0 dev 9 function 1 not configured
skc0 at pci0 dev 10 function 0: ioapic0 pin 17 (irq 10)
skc0: interrupt moderation is 0 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0 at skc0 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0 at pci0 dev 11 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 16 (irq 11)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 0
com1 at acpi0 (PNP0501-1)              
com1: io 0x3f8-0x3ff irq 4             
com1: ns16550a, working fifo           
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)            
pckbc1: using irq 1 for kbd slot       
wskbd0 at pckbd0: console keyboard     
pcppi1: attached to attimer1           
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0         
pchb0: VIA Technologies product 0x0282 (rev. 0x00)
agp0 at pchb0: aperture at 0xec000000, size 0xe900000
pchb1 at pci0 dev 0 function 1         
pchb1: VIA Technologies product 0x1282 (rev. 0x00)
pchb2 at pci0 dev 0 function 2         
pchb2: VIA Technologies product 0x2282 (rev. 0x00)
pchb3 at pci0 dev 0 function 3         
pchb3: VIA Technologies product 0x3282 (rev. 0x00)
pchb4 at pci0 dev 0 function 4         
pchb4: VIA Technologies product 0x4282 (rev. 0x00)
pchb5 at pci0 dev 0 function 7         
pchb5: VIA Technologies product 0x7282 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1                     
pci1: i/o space, memory space enabled  
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x5446 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0       
fwohci0 at pci0 dev 7 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x80)                        
fwohci0: interrupting at ioapic0 pin 16 (irq 11)
fwohci0: OHCI version 1.0 (ROM=1)      
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:28:27 
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus   
fwip0 at ieee1394if0: IP over IEEE1394 
fwohci0: Initiate bus reset            
pdcsata0 at pci0 dev 8 function 0      
pdcsata0: Promise PDC20378 SATA150 controller (rev. 0x02)
pdcsata0: interrupting at ioapic0 pin 18 (irq 5)
pdcsata0: bus-master DMA support present
atabus0 at pdcsata0 channel 0          
atabus1 at pdcsata0 channel 1          
atabus2 at pdcsata0 channel 2          
bktr0 at pci0 dev 9 function 0         
bktr0: interrupting at ioapic0 pin 16 (irq 11)
bktr0: Hauppauge Model 38105 B211      
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner.
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x02) at pci0 dev 9 function 1 not configured
skc0 at pci0 dev 10 function 0: ioapic0 pin 17 (irq 10)
skc0: interrupt moderation is 0 us     
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0 at skc0 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto                                
re0 at pci0 dev 11 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 16 (irq 11)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ral0 at pci0 dev 12 function 0: Ralink Technologies RT2560 802.11b/g (rev. 0x01)
ral0: interrupting at ioapic0 pin 17 (irq 10)
ral0: 802.11 address [_MAC_XXXXXXXXXX] 
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus3 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus4 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus5 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus6 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 10)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapcib0 at pci0 dev 17 function 0
viapcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
viapcib0: SMBus found at 0x400 (revision 0x0)
iic0 at viapcib0: I2C bus
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 5)
auvia0: ac97: Avance Logic ALC850 codec; no 3D stereo
auvia0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auvia0: full duplex, independent
pchb6 at pci0 dev 24 function 0
pchb6: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb9 at pci0 dev 24 function 3
pchb9: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at viapcib0
lm0 at isa0 port 0x290-0x297: Winbond W83627THF Hardware monitor
ioapic0: enabling
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter clockinterrupt frequency 1024 Hz quality 0
Kernelized RAIDframe activated
pdcsata0 port 0: device present, speed: 1.5Gb/s
pdcsata0 port 1: device present, speed: 1.5Gb/s
viaide0 port 0: device present, speed: 1.5Gb/s
viaide0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0umass0 at uhub4 port 6 configuration 1 interface 0
umass0: Genesys USB Reader, rev 2.00/93.17, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 2 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 9317> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Generic, STORAGE DEVICE, 9317> disk removable
sd1: fabricating a geometry
sd1: 14560 KB, 14 cyl, 64 head, 32 sec, 512 bytes/sect x 29120 sectors
pdcsata0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
: <MAXTOR STM31000340AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(pdcsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
MAGIC == 0x00
wd1 at atabus1 drive 0pdcsata0:1:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
: <SAMSUNG HD103UJ>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd1(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
MAGIC == 0x00
wd2 at atabus3 drive 0: <ST3300831AS>
wd2: quirks 2<FORCE_LBA48>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 279 GB, 581421 cyl, 16 head, 63 sec, 512 bytes/sect x 586072368 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
MAGIC == 0x00
wd3 at atabus4 drive 0: <WDC WD3000JD-19KLB0>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 279 GB, 581421 cyl, 16 head, 63 sec, 512 bytes/sect x 586072368 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
MAGIC == 0x00
atapibus0 at atabus5: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4167B, F734AAFEB2B4, DL11> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1: fabricating a geometry
raid1: RAID Level 1
raid1: Components: /dev/wd1a /dev/wd0a 
raid1: Total Sectors: 1953524864 (953869 MB)
raid0: RAID Level 1
raid0: Components: /dev/wd2a /dev/wd3a 
raid0: Total Sectors: 586072192 (286168 MB)

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.