Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2009-02-14 12:40:43
From: herdware
Description: IBM Thinkpad 240X
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0_RC2 (GENERIC) #0: Mon Feb 9 10:11:20 UTC 2009
xxx@xxx.xxx:/home/builds/ab/netbsd-5-0-RC2/i386/200902090142Z-obj/home/builds/ab/netbsd
-5-0-RC2/src/sys/arch/i386/compile/GENERIC
total memory = 127 MB
avail memory = 113 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
IBM 260961G (Not Available)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 138MHz, id 0x683
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
LNKA: ACPI: Found matching pin for 0.9.INTA at func 0: 255
LNKB: ACPI: Found matching pin for 0.10.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.11.INTA at func 0: 5
LNKD: ACPI: Found matching pin for 0.12.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter ACPI-Safe frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
LPTB (PNP0400) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, IBM3781): aux port
pckbc2: irq 12
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibut0 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, BQ2040
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 60.0C active cooling level 1: 66.0C critical 100.0C pas
sive 44.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7194 (rev. 0x01)
vendor 0x8086 product 0x7198 (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 0 not configur
ed
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82440MX IDE controller (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x719a (rev. 0x00)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: vendor 0x8086 product 0x719b (rev. 0x00)
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 9 function 0: vendor 0x126f product 0x0712 (rev. 0xa0)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
cbb0 at pci0 dev 10 function 0: vendor 0x104c product 0xac1e (rev. 0x00)
clct0 at pci0 dev 11 function 0: vendor 0x1013 product 0x6005 (rev. 0x01)
clct0: interrupting at irq 5
clct0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
clct0: ac97: ext id 200<AMAP>
audio0 at clct0: full duplex, independent
vendor 0x11c1 product 0x0449 (miscellaneous communications, revision 0x01) at pci0 dev 12 function 0 not
configured
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x21000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 11
cardslot0 at cbb0
pcmcia0 at cardslot0
isa0 at mainbus0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
acpiacad0: AC adapter offline.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wi0 at pcmcia0 function 0: <NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA>
wi0: 802.11 address xx:xx:xx:xx:xx:xx
wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wd0 at atabus0 drive 0: <IC25N020ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)