Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2009-11-27 09:12:12
From: Richard Bejtlich
Description: Dell Poweredge 2950iii (need to fix /dev/concat/nsm ?)
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (1995.01-MHz 686-class CPU)
Origin = GenuineIntel Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3404808192 (3247 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic2: Changing APIC ID to 6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 160-183 on motherboard
ioapic2 <Version 2.0> irqs 224-247 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter HPET frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci6
pci7: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci7
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: Ethernet address: [_MAC_XXXXXXXXXX]
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (3.5.12); Flags (MSI|MFW); MFW (ipms 1.6.0)
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pci8: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci4
pci9: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib7
mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfcffc000-0xfcffffff,0xfcfe0000-0xfcfeffff irq 16 at device 0.0 on pci1
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.14.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci10: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 on pci10
pci11: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 on pci11
pci12: <PCI bus> on pcib10
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdce0-0xdcff mem 0xfcdc0000-0xfcddffff,0xfcda0000-0xfcdbffff irq 16 at device 0.0 on pci12
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdcc0-0xdcdf mem 0xfcd80000-0xfcd9ffff,0xfcd60000-0xfcd7ffff irq 17 at device 0.1 on pci12
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib11: <PCI-PCI bridge> at device 1.0 on pci11
pci13: <PCI bus> on pcib11
em2: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xcce0-0xccff mem 0xfcbc0000-0xfcbdffff,0xfcba0000-0xfcbbffff irq 17 at device 0.0 on pci13
em2: Using MSI interrupt
em2: [FILTER]
em2: Ethernet address: [_MAC_XXXXXXXXXX]
em3: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xccc0-0xccdf mem 0xfcb80000-0xfcb9ffff,0xfcb60000-0xfcb7ffff irq 18 at device 0.1 on pci13
em3: Using MSI interrupt
em3: [FILTER]
em3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib12: <PCI-PCI bridge> at device 5.0 on pci0
pci14: <PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci15: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 0.0 on pci15
pci16: <ACPI PCI bus> on pcib14
em4: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xbcc0-0xbcff mem 0xfc7a0000-0xfc7bffff,0xfc740000-0xfc77ffff irq 160 at device 3.0 on pci16
em4: [FILTER]
em4: Ethernet address: [_MAC_XXXXXXXXXX]
em5: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xbc80-0xbcbf mem 0xfc780000-0xfc79ffff irq 161 at device 3.1 on pci16
em5: [FILTER]
em5: Ethernet address: [_MAC_XXXXXXXXXX]
pcib15: <ACPI PCI-PCI bridge> at device 0.2 on pci15
pci17: <ACPI PCI bus> on pcib15
em6: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xacc0-0xacff mem 0xfc5a0000-0xfc5bffff,0xfc540000-0xfc57ffff irq 224 at device 4.0 on pci17
em6: [FILTER]
em6: Ethernet address: [_MAC_XXXXXXXXXX]
em7: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xac80-0xacbf mem 0xfc580000-0xfc59ffff,0xfc500000-0xfc53ffff irq 225 at device 4.1 on pci17
em7: [FILTER]
em7: Ethernet address: [_MAC_XXXXXXXXXX]
pcib16: <PCI-PCI bridge> at device 7.0 on pci0
pci18: <PCI bus> on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib17
pcib18: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib18
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: Ethernet address: [_MAC_XXXXXXXXXX]
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (3.5.12); Flags (MSI|MFW); MFW (ipms 1.6.0)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x8ce0-0x8cff irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f00
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x8cc0-0x8cdf irq 20 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f00
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x8ca0-0x8cbf irq 21 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f00
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x8c80-0x8c9f irq 20 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f00
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfd100000-0xfd1003ff irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib19: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci19: <ACPI PCI bus> on pcib19
vgapci0: <VGA-compatible display> port 0x9c00-0x9cff mem 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci19
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-T10N/A102> at ata0-master UDMA33
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <DP BACKPLANE 1.05> Fixed Enclosure Services SCSI-5 device
ses0: 300.000MB/s transfers
ses0: SCSI-3 SES Device
da0 at mpt0 bus 0 target 0 lun 0
da0: <ATA WDC WD2500YS-18S 6C07> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 238418MB (488281250 512 byte sectors: 255H 63S/T 30394C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <ATA WDC WD2500YS-18S 6C07> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 238418MB (488281250 512 byte sectors: 255H 63S/T 30394C)
da2 at mpt0 bus 0 target 2 lun 0
da2: <ATA WDC WD2500YS-18S 6C07> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 238418MB (488281250 512 byte sectors: 255H 63S/T 30394C)
da3 at mpt0 bus 0 target 3 lun 0
da3: <ATA WDC WD2500YS-18S 6C07> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 238418MB (488281250 512 byte sectors: 255H 63S/T 30394C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
ugen4.2: <vendor 0x04b4> at usbus4
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus4
GEOM_CONCAT: Device nsm created (id=3305580476).
GEOM_CONCAT: Disk da1s1e attached to nsm.
GEOM_CONCAT: Disk da2s1e attached to nsm.
GEOM_CONCAT: Disk da3s1e attached to nsm.
GEOM_CONCAT: Device nsm activated.
GEOM_CONCAT: Cannot add disk ufsid/47ed4b7580f21f01 to nsm (error=17).
GEOM_CONCAT: Cannot add disk ufsid/47ed4b7e0ce0dd5d to nsm (error=17).
Root mount waiting for: usbus4
uhub5: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/da0s1a
GEOM_CONCAT: Cannot add disk ufsid/47ed4b7e0ce0dd5d to nsm (error=17).
GEOM_CONCAT: Cannot add disk ufsid/47ed4b7580f21f01 to nsm (error=17).
bce0: link state changed to UP