Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2010-06-09 13:26:33
From: Jasper
Description: Compal HLB2 (sold as a pcspecialist enigma)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.29 (LIMPIT) #5: Sun Jun 6 21:56:11 BST 2010
jasper@limpit:/home/jasper/develop/netbsd/netbsd-src-and-build/tree/n.64/obj/sys/arch/amd64/compile/LIMPIT
total memory = 4060 MB
avail memory = 3925 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
( )
mainbus0 (root)
Parsing all Control Methods:
Table [DSDT](id 0001) - 1052 Objects with 64 Devices 158 Methods 32 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 27 Objects with 0 Devices 16 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 12 Objects with 0 Devices 9 Methods 0 Regions
tbxface-0601 [02] TbLoadNamespace : ACPI Tables successfully acquired
evxfevnt-0184 [02] Enable : Transition to ACPI mode successful
cpu0 at mainbus0 apid 0timecounter: Timecounter lapic frequency 266128473 Hz quality -100
: Intel 686-class, 2527MHz, id 0x1067a
est_init_main: bus_clock = 10666
est_init_main: idlo = 0x617
est_init_main: lo 1068 mV, 640 MHz
est_init_main: raw 23 , 6
est_init_main: idhi = 0x4924
est_init_main: hi 1276 mV, 7786 MHz
est_init_main: raw 36 , 73
est_init_main: cur = 0x4924
est_init_main: fake entry 0: 1276 mV, 7786 MHz MSR*100 mV = 3600 freq = 7300
est_init_main: fake entry 1: 1260 mV, 7253 MHz MSR*100 mV = 3500 freq = 6786
est_init_main: fake entry 2: 1244 mV, 6720 MHz MSR*100 mV = 3400 freq = 6272
est_init_main: fake entry 3: 1228 mV, 6186 MHz MSR*100 mV = 3300 freq = 5758
est_init_main: fake entry 4: 1212 mV, 5653 MHz MSR*100 mV = 3200 freq = 5244
est_init_main: fake entry 5: 1196 mV, 5120 MHz MSR*100 mV = 3100 freq = 4730
est_init_main: fake entry 6: 1180 mV, 4586 MHz MSR*100 mV = 3000 freq = 4216
est_init_main: fake entry 7: 1164 mV, 4053 MHz MSR*100 mV = 2900 freq = 3702
est_init_main: fake entry 8: 1148 mV, 3413 MHz MSR*100 mV = 2800 freq = 3188
est_init_main: fake entry 9: 1132 mV, 2880 MHz MSR*100 mV = 2700 freq = 2674
est_init_main: fake entry 10: 1116 mV, 2347 MHz MSR*100 mV = 2600 freq = 2160
est_init_main: fake entry 11: 1100 mV, 1813 MHz MSR*100 mV = 2500 freq = 1646
est_init_main: fake entry 12: 1084 mV, 1280 MHz MSR*100 mV = 2400 freq = 1132
est_init_main: fake entry 13: 1068 mV, 747 MHz MSR*100 mV = 2300 freq = 618
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu1 at mainbus0 apid 1: Intel 686-class, 2527MHz, id 0x1067a
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20100121
acpi0: X/RSDT: OemId <PTLTD , XSDT ,06040000>, AslId < LTP,00000000>
evxfevnt-0170 [02] Enable : System is already in ACPI mode
evgpeblk-1129 [04] EvCreateGpeBlock : GPE 00 to 3F [_GPE] 8 regs on int 0x9
Completing Region/Field/Buffer/Package initialization:...................................................................................
Initialized 27/32 Regions 5/5 Fields 26/26 Buffers 25/34 Packages (1107 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 70 objects)
evgpeblk-1234 [03] EvInitializeGpeBlock : Found 2 Wake, Enabled 4 Runtime GPEs in this block
acpi0: SCI interrupting at int 9
timecounter: Timecounter ACPI-Fast frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
MIR (ENE0100) at acpi0 not configured
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: COMPAL Li-Ion rechargeable battery
acpibat0: [_SERIAL_NUMBER_XX], model number PA3534U
acpibat0: low->warn granularity: 0.264Ah, warn->full granularity: 3.780Ah
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN070B) (aux port): irq 12
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
EMSC (CPL0002) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
acpi0: \ HID - UID - STA 0xFFFFFFFF ADR -
acpi0: CPU0 HID - UID - STA 0xFFFFFFFF ADR -
acpi0: CPU1 HID - UID - STA 0xFFFFFFFF ADR -
acpi0: CPU2 HID - UID - STA 0xFFFFFFFF ADR -
acpi0: CPU3 HID - UID - STA 0xFFFFFFFF ADR -
acpi0: _SB HID - UID - STA 0xFFFFFFFF ADR -
acpi0: PCI0 HID PNP0A08 UID 0 STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: P0P2 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000010000
acpi0: PEGP HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: LCD HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000110
acpi0: CRT1 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000100
acpi0: DTV1 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000200
acpi0: HDMI HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000120
acpi0: HDAT HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000210
acpi0: GFX0 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000020000
acpi0: DD01 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: DD02 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000002
acpi0: DD03 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000003
acpi0: DD04 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000004
acpi0: DD05 HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000005
acpi0: P0P1 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001E0000
acpi0: MIR HID ENE0100 UID - STA 0x0000000F ADR -
acpi0: LPCB HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0000
acpi0: EC0 HID PNP0C09 UID - STA 0xFFFFFFFF ADR -
acpi0: DMAC HID PNP0200 UID - STA 0xFFFFFFFF ADR -
acpi0: HPET HID PNP0103 UID - STA 0x0000000F ADR -
acpi0: IPIC HID PNP0000 UID - STA 0xFFFFFFFF ADR -
acpi0: MATH HID PNP0C04 UID - STA 0xFFFFFFFF ADR -
acpi0: LDRC HID PNP0C02 UID 2 STA 0xFFFFFFFF ADR -
acpi0: RTC HID PNP0B00 UID - STA 0xFFFFFFFF ADR -
acpi0: TIMR HID PNP0100 UID - STA 0xFFFFFFFF ADR -
acpi0: BAT1 HID PNP0C0A UID 1 STA 0x0000001F ADR -
acpi0: ACAD HID ACPI0003 UID - STA 0xFFFFFFFF ADR -
acpi0: PS2K HID PNP0303 UID - STA 0xFFFFFFFF ADR -
acpi0: PS2M HID SYN070B UID - STA 0xFFFFFFFF ADR -
acpi0: USB0 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0000
acpi0: USB1 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0001
acpi0: USB2 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0002
acpi0: USBR HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0003
acpi0: EHC1 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0007
acpi0: USB3 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0000
acpi0: USB4 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0001
acpi0: USB5 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0002
acpi0: EHC2 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0007
acpi0: HDEF HID - UID - STA 0xFFFFFFFF ADR 0x00000000001B0000
acpi0: RP01 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0000
acpi0: PXSX HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: RP02 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0001
acpi0: RP03 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0002
acpi0: RP04 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0003
acpi0: PXSX HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: RP05 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0004
acpi0: RP06 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0005
acpi0: GLAN HID - UID - STA 0xFFFFFFFF ADR 0x0000000000190000
acpi0: PDRC HID PNP0C02 UID 1 STA 0xFFFFFFFF ADR -
acpi0: SAT0 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0002
acpi0: SAT1 HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0005
acpi0: SBUS HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0003
acpi0: TPM HID IFX0102 UID 1 STA 0x0000000F ADR -
acpi0: LID0 HID PNP0C0D UID - STA 0xFFFFFFFF ADR -
acpi0: PWRB HID PNP0C0C UID - STA 0xFFFFFFFF ADR -
acpi0: LNKA HID PNP0C0F UID 1 STA 0x0000000B ADR -
acpi0: LNKB HID PNP0C0F UID 2 STA 0x0000000B ADR -
acpi0: LNKC HID PNP0C0F UID 3 STA 0x0000000B ADR -
acpi0: LNKD HID PNP0C0F UID 4 STA 0x0000000B ADR -
acpi0: LNKE HID PNP0C0F UID 5 STA 0x00000009 ADR -
acpi0: LNKF HID PNP0C0F UID 6 STA 0x0000000B ADR -
acpi0: LNKG HID PNP0C0F UID 7 STA 0x0000000B ADR -
acpi0: LNKH HID PNP0C0F UID 8 STA 0x0000000B ADR -
acpi0: _TZ HID - UID - STA - ADR -
acpi0: EMSC HID CPL0002 UID - STA 0xFFFFFFFF ADR -
\ [06] [ ]
CPU0 [12] [ ]
CPU1 [12] [ ]
CPU2 [12] [ ]
CPU3 [12] [ ]
_SB [06] [ ]
PCI0 [06] [ ] (PCI) @ 0x00:0x00:0x00:0x00 [R] [B] -> 0x00
P0P2 [06] [ ] (PCI) @ 0x00:0x00:0x01:0x00 [B] -> 0x01
PEGP [06] [ ] (PCI) @ 0x00:0x01:0x00:0x00
LCD [06] [ ]
CRT1 [06] [ ]
DTV1 [06] [ ]
HDMI [06] [ ]
HDAT [06] [ ]
GFX0 [06] [ ] (PCI) @ 0x00:0x00:0x02:0x00
DD01 [06] [ ]
DD02 [06] [ ]
DD03 [06] [ ]
DD04 [06] [ ]
DD05 [06] [ ]
P0P1 [06] [ ] (PCI) @ 0x00:0x00:0x1E:0x00 [B] -> 0x26
MIR [06] [ ]
LPCB [06] [ ] (PCI) @ 0x00:0x00:0x1F:0x00
EC0 [06] [ ]
DMAC [06] [ ]
HPET [06] [ ]
IPIC [06] [ ]
MATH [06] [ ]
LDRC [06] [ ]
RTC [06] [ ]
TIMR [06] [ ]
BAT1 [06] [ ]
ACAD [06] [ ]
PS2K [06] [ ]
PS2M [06] [ ]
USB0 [06] [ ] (PCI) @ 0x00:0x00:0x1D:0x00
USB1 [06] [ ] (PCI) @ 0x00:0x00:0x1D:0x01
USB2 [06] [ ] (PCI) @ 0x00:0x00:0x1D:0x02
USBR [06] [ ] (PCI) @ 0x00:0x00:0x1D:0x03
EHC1 [06] [ ] (PCI) @ 0x00:0x00:0x1D:0x07
USB3 [06] [ ] (PCI) @ 0x00:0x00:0x1A:0x00
USB4 [06] [ ] (PCI) @ 0x00:0x00:0x1A:0x01
USB5 [06] [ ] (PCI) @ 0x00:0x00:0x1A:0x02
EHC2 [06] [ ] (PCI) @ 0x00:0x00:0x1A:0x07
HDEF [06] [ ] (PCI) @ 0x00:0x00:0x1B:0x00
RP01 [06] [ ] (PCI) @ 0x00:0x00:0x1C:0x00 [B] -> 0x02
PXSX [06] [ ] (PCI) @ 0x00:0x02:0x00:0x00
RP02 [06] [ ] (PCI) @ 0x00:0x00:0x1C:0x01
RP03 [06] [ ] (PCI) @ 0x00:0x00:0x1C:0x02 [B] -> 0x0E
RP04 [06] [ W] (PCI) @ 0x00:0x00:0x1C:0x03 [B] -> 0x14
PXSX [06] [ W] (PCI) @ 0x00:0x14:0x00:0x00
RP05 [06] [ ] (PCI) @ 0x00:0x00:0x1C:0x04 [B] -> 0x1A
RP06 [06] [ ] (PCI) @ 0x00:0x00:0x1C:0x05
GLAN [06] [ W] (PCI) @ 0x00:0x00:0x19:0x00
PDRC [06] [ ]
SAT0 [06] [ ] (PCI) @ 0x00:0x00:0x1F:0x02
SAT1 [06] [ ] (PCI) @ 0x00:0x00:0x1F:0x05
SBUS [06] [ ] (PCI) @ 0x00:0x00:0x1F:0x03
TPM [06] [ ]
LID0 [06] [ ]
PWRB [06] [ ]
LNKA [06] [ ]
LNKB [06] [ ]
LNKC [06] [ ]
LNKD [06] [ ]
LNKE [06] [ ]
LNKF [06] [ ]
LNKG [06] [ ]
LNKH [06] [ ]
_TZ [13] [ ]
EMSC [06] [ ]
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge (rev. 0x07)
agp0 at pchb0: cant find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel product 0x2a41 (rev. 0x07)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x9480 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Mobility Radeon HD 4650
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0 vendor 0x1002 product 0xAA01 nid 0x01 (firmware configuration)
hdafg0: DAC0:02, Digital Digital Other Out: Jack (Unknown, 03)
hdafg0: 2ch/0ch 32000Hz-48000Hz 16/16
audio0 at hdafg0: half duplex, playback
uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 19
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg1 at hdaudio1 vendor 0x10EC product 0x0268 nid 0x01 (firmware configuration)
hdafg1: DAC0:02, Analog Speaker: Fixed Function (Unknown, 14)
hdafg1: DAC0:02, Analog HP Out: Jack (Green, 15)
hdafg1: ADC1:07, Analog Mic In: Fixed Function (Unknown, 19)
hdafg1: ADC2:08, Analog Mic In: Jack (Pink, 18)
hdafg1: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
audio1 at hdafg1: full duplex, playback, capture, independent
hdvsmfg at hdaudio1 vendor 0x11C1 product 0x1040 nid 0x01 not configured
ppb1 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x03)
ppb1: disabling notification events
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
JMicron Technology product 0x2382 (miscellaneous system) at pci2 dev 0 function 0 not configured
sdhc0 at pci2 dev 0 function 2: JMicron Technology product 0x2381 (rev. 0x00)
sdhc0: interrupting at ioapic0 pin 16
sdmmc0 at sdhc0
JMicron Technology product 0x2383 (miscellaneous system) at pci2 dev 0 function 3 not configured
ppb2 at pci0 dev 28 function 2: Intel 82801I PCI Express Port #3 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 14
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 14.2 phy 7.0 radio 10.2
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ppb3 at pci0 dev 28 function 3: Intel 82801I PCI Express Port #4 (rev. 0x03)
ppb3: disabling notification events
pci4 at ppb3 bus 20
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x02)
re0: interrupting at ioapic0 pin 19
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 28 function 4: Intel 82801I PCI Express Port #5 (rev. 0x03)
ppb4: disabling notification events
pci5 at ppb4 bus 26
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 23
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 19
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x93)
pci6 at ppb5 bus 38
pci6: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: Intel 82801IM LPC Interface Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 2: Intel 82801I Mobile Serial ATA Controller (ICH9) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801I SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
piixide1 at pci0 dev 31 function 5: Intel 82801I Mobile Serial ATA Controller (ICH9) (rev. 0x03)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at pcib0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
timecounter: Timecounter TSC frequency 2527072290 Hz quality -100
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
acpiacad0: AC adapter online.
ehci0: handing over full speed device on port 1 to uhci0
ugen1 at uhub7 port 2
ugen1: Generic FingerPrinter Reader, rev 2.00/1.00, addr 2
uhub8 at uhub3 port 4: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub8: single transaction translator
uhub8: 4 ports with 4 removable, self powered
ubt0 at uhub0 port 1
ubt0: Broadcom Corp BCM2046 Bluetooth Device, rev 2.00/4.23, addr 2
uvideo0 at uhub7 port 3 configuration 1 interface 0: SuYin USB 2.0 Camera, rev 2.00/2.00, addr 3
video0 at uvideo0: SuYin USB 2.0 Camera, rev 2.00/2.00, addr 3
wd0 at atabus0 drive 0: <INTEL SSDSA2M160G2GC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
usbd_get_string: getting lang failed, using 0
uhidev0 at uhub8 port 2 configuration 1 interface 0
uhidev0: Logitech Inc. WingMan Extreme Digital 3D, rev 1.00/1.04, addr 3, iclass 3/0
uhid0 at uhidev0: input=6, output=0, feature=0
uhidev1 at uhub8 port 3 configuration 1 interface 0
uhidev1: Zippy Technology Corporation USB Keypad, rev 1.10/0.01, addr 4, iclass 3/1
uhid1 at uhidev1: input=8, output=1, feature=0
uhidev2 at uhub8 port 4 configuration 1 interface 0
uhidev2: B16_b_02 USB-PS/2 Optical Mouse, rev 2.00/98.02, addr 5, iclass 3/1
ums0 at uhidev2: 4 buttons and Z dir
wsmouse1 at ums0 mux 0
acpibat0: Sanyo Li-Ion rechargeable battery
acpibat0: [_SERIAL_NUMBER_XX], model number PA3534U
acpibat0: low->warn granularity: 0.264Ah, warn->full granularity: 3.780Ah
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW SN-S083C, i1H3456789KL3N4P, SB00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: module error: module built for `599002600, system `599002900
WARNING: module error: module built for `599002600, system `599002900
WARNING: module error: module built for `599002600, system `599002900
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ath0: device timeout (txq 1, txintrperiod 5)
ath0: device timeout (txq 1, txintrperiod 4)
cd0(piixide0:1:0): Check Condition on CDB: 0x35 00 00 00 00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present - Tray Open
ath0: device timeout (txq 1, txintrperiod 3)
ath0: device timeout (txq 1, txintrperiod 2)
usb_desc_iter_next: first descriptor has wrong length?: 28
usb_desc_iter_next: first descriptor has wrong length?: 28
usb_desc_iter_next: first descriptor has wrong length?: 28
umodem0 at uhub8 port 1 configuration 1 interface 1
umodem0: MTK GPS Receiver, rev 2.00/1.00, addr 6, iclass 2/2
usb_desc_iter_next: first descriptor has wrong length?: 28
usb_desc_iter_next: first descriptor has wrong length?: 28
usb_desc_iter_next: first descriptor has wrong length?: 28
umodem0: data interface 0, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0