Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2010-08-27 23:25:12
From: vsrinivas
Description: Pentium 4 1.5GHz / Dell GX240
Copyright (c) 2003-2010 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v2.7.3.744.g660f28-DEVELOPMENT #2: Fri Aug 27 19:41:51 EST 2010
me@challenger.:/usr/obj/usr/src/sys/CHALLENGER
TSC clock: 1495108960 Hz, i8254 clock: 1193150 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz (1495.16-MHz 686-class CPU)
Origin = GenuineIntel Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 267874304 (255 MB)
avail memory = 248184832 (236 MB)
FQ scheduler policy version 1.0 loaded
kbd1 at kbdmux0
No policy for md0 specified, or policy not found
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0xfd570 00014 (v0 DELL )
ACPI: RSDT 0xfd584 00034 (v1 DELL GX240 00000006 ASL 00000061)
ACPI: FACP 0xfd5b8 00074 (v1 DELL GX240 00000006 ASL 00000061)
ACPI: DSDT 0xfffe3c22 02370 (v1 DELL dt_ex 00001000 MSFT 0100000D)
ACPI: FACS 0xff77000 00040
ACPI: SSDT 0xfffe5f92 000A7 (v1 DELL st_ex 00001000 MSFT 0100000D)
ACPI: APIC 0xfd62c 0005C (v1 DELL GX240 00000006 ASL 00000061)
ACPI: BOOT 0xfd688 00028 (v1 DELL GX240 00000006 ASL 00000061)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL GX240 > on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APMs device. You cant run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <Power Button> on acpi0
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf0000000-0xf1ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xff9f0000-0xff9fffff,0xe0000000-0xefffffff irq 11 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xff9e0000-0xff9effff,0xd0000000-0xdfffffff at device 0.1 on pci1
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 82540EM 6.9.6> port 0xdcc0-0xdcff mem 0xff7c0000-0xff7dffff,0xff7e0000-0xff7fffff irq 11 at device 9.0 on pci2
em0: MAC address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
No policy for ad1 specified, or policy not found
disk scheduler: set policy of ad1 to noop
ad1: 38146MB <Seagate ST340014A 8.16> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xff80-0xff9f irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x2443) at device 31.3 irq 10
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xff60-0xff7f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> (vendor 0x8086, dev 0x2445) at device 31.5 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff,0xce000-0xcffff on isa0
pmtimer0 on isa0
fdc1: cannot reserve I/O port range
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc1: cannot reserve I/O port range
ip: MPSAFE
arp: MPSAFE
CAM: Configuring 2 busses
CAM: finished configuring all busses (0 left)
Mounting root from hammer:serno/5JXF19CM.s1d
tryroot serno/5JXF19CM.s1d
HAMMER(ROOT) recovery check seqno=065ecc17
HAMMER(ROOT) recovery range 3000000000bca790-3000000000bca790
HAMMER(ROOT) recovery nexto 3000000000bca790 endseqno=065ecc18
HAMMER(ROOT) mounted clean, no recovery needed
Mounting devfs
disk scheduler: set policy of ad1 to fq