Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2010-09-03 05:08:32
From: rmy
Description: Compaq iPAQ Desktop (2.0 model)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0.2 (IPAQ_DESKTOP) #2: Fri Sep 3 10:38:59 CEST 2010 root@dhcppc0:/usr/src/sys/arch/i386/compile/IPAQ_DESKTOP total memory = 190 MB avail memory = 181 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter i8254 frequency 1193182 Hz quality 100 Compaq iPAQ Desktop mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 797MHz, id 0x68a ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId <COMPAQ,CPQ001> ,20010418>, AslId < ,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter ACPI-Fast frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer npx0 at acpi0 (NCP, PNP0C04) npx0: io 0xf0-0xff irq 13 npx0: reported by CPUID; using exception 16 attimer0 at acpi0 (TIME, PNP0100): AT Timer attimer0: io 0x40-0x43 irq 0 pcppi0 at acpi0 (SPKR, PNP0800) pcppi0: io 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 APIC (PNP0003) at acpi0 not configured acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button apm0 at acpi0: Power Management spec V1.2 attimer0: attached to pcppi0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x1130 (rev. 0x02) agp0 at pchb0: aperture at 0x44000000, size 0x4000000 vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x1132 (rev. 0x02) wsdisplay0 at vga0: console (80x25, vt100 emulation) drm at vga0 not configured ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x02) pci1 at ppb0 bus 2 pci1: i/o space, memory space enabled fxp0 at pci1 dev 8 function 0: Intel i82562 Ethernet, rev 1 fxp0: interrupting at ioapic0 pin 20 fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ichlpcib0 at pci0 dev 31 function 0 ichlpcib0: vendor 0x8086 product 0x2440 (rev. 0x02) timecounter: Timecounter ichlpcib0 frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2442 (rev. 0x02) uhci0: interrupting at ioapic0 pin 19 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 31 function 4: vendor 0x8086 product 0x2444 (rev. 0x02) uhci1: interrupting at ioapic0 pin 23 usb1 at uhci1: USB revision 1.0 auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio auich0: interrupting at ioapic0 pin 17 auich0: ac97: Analog Devices AD1885 codec; headphone, Analog Devices Phat Stereo auich0: ac97: ext id 1<VRA> isa0 at ichlpcib0 pckbc0 at isa0 port 0x60-0x64 isapnp0 at isa0 port 0x279: ISA Plug n Play device support isapnp0: no ISA Plug n Play devices found timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0 auich0: measured ac97 link rate at 55079 Hz, will use 55000 Hz audio0 at auich0: full duplex, mmap, independent uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at uhub0 port 2: vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 2 uhub2: 4 ports with 4 removable, self powered wd0 at atabus0 drive 0: <ST340016A> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 38165 MB, 77542 cyl, 16 head, 63 sec, 512 bytes/sect x 78163247 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)