Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2011-06-23 14:04:49
From: ike
Description: Supermicro X7DCA-L
Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-RELEASE #0: Thu Feb 17 02:41:51 UTC 2011 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.01-MHz K8-class CPU) Origin = GenuineIntel Id = 0x6f6 Family = 6 Model = f Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 17179869184 (16384 MB) avail memory = 16540438528 (15774 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 2 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <SMCI SMCISLP2> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci0: <base peripheral> at device 8.0 (no driver attached) uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc504800-0xfc504bff irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x2000-0x201f mem 0xfc100000-0xfc11ffff irq 16 at device 0.0 on pci4 em0: Using an MSI interrupt em0: [FILTER] em0: Ethernet address: [_MAC_XXXXXXXXXX] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci5: <ACPI PCI bus> on pcib5 em1: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x3000-0x301f mem 0xfc200000-0xfc21ffff irq 17 at device 0.0 on pci5 em1: Using an MSI interrupt em1: [FILTER] em1: Ethernet address: [_MAC_XXXXXXXXXX] uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 23 at device 29.0 on pci0 uhci1: [ITHREAD] usbus2: <Intel 82801I (ICH9) USB controller> on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 22 at device 29.1 on pci0 uhci2: [ITHREAD] usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 21 at device 29.2 on pci0 uhci3: [ITHREAD] usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc504c00-0xfc504fff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xfa000000-0xfbffffff,0xfc000000-0xfc03ffff at device 1.0 on pci6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH9 SATA300 controller> port 0x1c10-0x1c17,0x1c04-0x1c07,0x1c08-0x1c0f,0x1c00-0x1c03,0x18a0-0x18bf mem 0xfc504000-0xfc5047ff irq 17 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI called from vendor specific driver atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci0 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci0 ata7: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter HPET frequency 14318180 Hz quality 900 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ad4: 953869MB <WDC WD1001FALS-00J7B1 05.00K05> at ata2-master UDMA100 SATA 3Gb/s ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ad6: 953869MB <WDC WD1001FALS-00J7B1 05.00K05> at ata3-master UDMA100 SATA 3Gb/s GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). ad8: 1907729MB <WL2000GSA3272C 50.0AB50> at ata4-master UDMA100 SATA 3Gb/s ad10: 1907729MB <WL2000GSA3272C 50.0AB50> at ata5-master UDMA100 SATA 3Gb/s GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s). uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ar0: writing of DDF metadata is NOT supported yet ar0: 953737MB <DDF RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! Root mount waiting for: usbus5 usbus1 uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 uhub5: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ar0s1a ugen2.2: <Dell> at usbus2 ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on usbus2 kbd2 at ukbd0 em0: link state changed to UP