Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2011-06-23 16:38:05
From: Mark Saad
Description: Sun Fire X4440
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE-p2 #0: Mon Jul 12 19:23:19 UTC 2010
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Quad-Core AMD Opteron(tm) Processor 8347 HE (1900.09-MHz K8-class CPU)
Origin = AuthenticAMD Id = 0x100f23 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
TSC: P-state invariant
Cores per package: 4
usable memory = 137424809984 (131058 MB)
avail memory = 132709392384 (126561 MB)
ACPI APIC Table: <SUN X4x40 >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
cpu0 (BSP): APIC ID: 4
cpu1 (AP): APIC ID: 5
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
cpu4 (AP): APIC ID: 8
cpu5 (AP): APIC ID: 9
cpu6 (AP): APIC ID: 10
cpu7 (AP): APIC ID: 11
cpu8 (AP): APIC ID: 12
cpu9 (AP): APIC ID: 13
cpu10 (AP): APIC ID: 14
cpu11 (AP): APIC ID: 15
cpu12 (AP): APIC ID: 16
cpu13 (AP): APIC ID: 17
cpu14 (AP): APIC ID: 18
cpu15 (AP): APIC ID: 19
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <SUN X4x40> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, ddf00000 (3) failed
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe008-0xe00b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter HPET frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xef00-0xef7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdfcfb000-0xdfcfbfff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfcfac00-0xdfcfacff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
umass0: <Texas Instruments Incorporated 6250 FW:[_IP_XXXXXX].562AD423, class 0/0, rev 2.00/2.00, addr 2> on uhub1
uhub2: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 3> on uhub1
uhub2: multiple transaction translators
uhub2: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce MCP55 SATA300 controller> port 0xc480-0xc487,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc0f mem 0xdfcf9000-0xdfcf9fff irq 23 at device 5.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb08f mem 0xdfcf8000-0xdfcf8fff irq 20 at device 5.1 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f mem 0xdfcf7000-0xdfcf7fff irq 21 at device 5.2 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9c00-0x9c7f mem 0xdf000000-0xdf7fffff,0xdefe0000-0xdeffffff irq 16 at device 5.0 on pci1
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xa400-0xa407 mem 0xdfcf6000-0xdfcf6fff,0xdfcfa800-0xdfcfa8ff,0xdfcfa400-0xdfcfa40f irq 22 at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: [_MAC_XXXXXXXXXX]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xa080-0xa087 mem 0xdfcf5000-0xdfcf5fff,0xdfcfa000-0xdfcfa0ff,0xdfcf4c00-0xdfcf4c0f irq 23 at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 3 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe1: Ethernet address: [_MAC_XXXXXXXXXX]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci4: <ACPI PCI bus> on pcib4
aac0: <SG-XPCIESAS-R-IN> mem 0xdfe00000-0xdfffffff irq 17 at device 0.0 on pci4
aac0: Enabling 64-bit address support
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: Sun STK RAID INT, aac driver 2.0.0-1
aacp0: <SCSI Passthrough Bus> on aac0
aacp1: <SCSI Passthrough Bus> on aac0
aacp2: <SCSI Passthrough Bus> on aac0
pcib5: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib5
pci128: <memory, RAM> at device 0.0 (no driver attached)
pci128: <memory, RAM> at device 1.0 (no driver attached)
pci128: <serial bus, SMBus> at device 1.1 (no driver attached)
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0x8400-0x8407,0x8080-0x8083,0x8000-0x8007,0x7c00-0x7c03,0x7880-0x788f mem 0xddffe000-0xddffefff irq 45 at device 5.0 on pci128
atapci3: [ITHREAD]
ata8: <ATA channel 0> on atapci3
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci3
ata9: [ITHREAD]
atapci4: <nVidia nForce MCP55 SATA300 controller> port 0x7800-0x7807,0x7480-0x7483,0x7400-0x7407,0x7080-0x7083,0x7000-0x700f mem 0xddffd000-0xddffdfff irq 46 at device 5.1 on pci128
atapci4: [ITHREAD]
ata10: <ATA channel 0> on atapci4
ata10: [ITHREAD]
ata11: <ATA channel 1> on atapci4
ata11: [ITHREAD]
atapci5: <nVidia nForce MCP55 SATA300 controller> port 0x6c00-0x6c07,0x6880-0x6883,0x6800-0x6807,0x6480-0x6483,0x6400-0x640f mem 0xddffc000-0xddffcfff irq 47 at device 5.2 on pci128
atapci5: [ITHREAD]
ata12: <ATA channel 0> on atapci5
ata12: [ITHREAD]
ata13: <ATA channel 1> on atapci5
ata13: [ITHREAD]
nfe2: <NVIDIA nForce MCP55 Networking Adapter> port 0x6080-0x6087 mem 0xddffb000-0xddffbfff,0xddffac00-0xddffacff,0xddffa800-0xddffa80f irq 44 at device 8.0 on pci128
miibus2: <MII bus> on nfe2
e1000phy2: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus2
e1000phy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe2: Ethernet address: [_MAC_XXXXXXXXXX]
nfe2: [FILTER]
nfe2: [FILTER]
nfe2: [FILTER]
nfe2: [FILTER]
nfe2: [FILTER]
nfe2: [FILTER]
nfe2: [FILTER]
nfe2: [FILTER]
nfe3: <NVIDIA nForce MCP55 Networking Adapter> port 0x6000-0x6007 mem 0xddff9000-0xddff9fff,0xddffa400-0xddffa4ff,0xddffa000-0xddffa00f irq 45 at device 9.0 on pci128
miibus3: <MII bus> on nfe3
e1000phy3: <Marvell 88E1149 Gigabit PHY> PHY 3 on miibus3
e1000phy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe3: Ethernet address: [_MAC_XXXXXXXXXX]
nfe3: [FILTER]
nfe3: [FILTER]
nfe3: [FILTER]
nfe3: [FILTER]
nfe3: [FILTER]
nfe3: [FILTER]
nfe3: [FILTER]
nfe3: [FILTER]
pcib6: <ACPI PCI-PCI bridge> at device 11.0 on pci128
pci129: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pci130: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 15.0 on pci128
pci131: <ACPI PCI bus> on pcib8
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
hwpstate0: <Cool`nQuiet 2.0> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcffff,0xd0000-0xd0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: unable to set the command byte.
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0
kbd2 at ukbd0
ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
Timecounters tick every 1.000 msec
aacd0: <Volume> on aac0
aacd0: 69890MB (143134720 sectors)
aacd1: <RAID 0/1> on aac0
aacd1: 209700MB (429465600 sectors)
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,1
(probe0:umass-sim0:0:0:0): Medium not present - tray closed
(probe0:umass-sim0:0:0:0): Unretryable error
ses0 at aacp2 bus 0 target 0 lun 0
ses0: <ADAPTEC Virtual SGPIO 0 0001> Fixed Enclosure Services SCSI-5 device
ses0: 3.300MB/s transfers
ses0: SCSI-3 SES Device
ses1 at aacp2 bus 0 target 1 lun 0
ses1: <ADAPTEC Virtual SGPIO 1 0001> Fixed Enclosure Services SCSI-5 device
ses1: 3.300MB/s transfers
ses1: SCSI-3 SES Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #15 Launched!
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-T632A SR03> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/label/rootfs
nfe0: link state changed to UP
Accounting disabled
Accounting enabled