Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2011-10-02 01:10:35
From: tlj
Description: HP Pavilion a1340n (desktop)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #1: Sat Oct  1 23:58:59 EDT 2011
    root@myst:/usr/obj/usr/src/sys/GENERIC i386
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3199.12-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf43  Family = f  Model = 4  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,
MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
  AMD Features=0x20100000<NX,LM>
  TSC: P-state invariant
real memory  = 1073741824 (1024 MB)
avail memory = 970391552 (925 MB)
MPTable: <ATI      RS400       >
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff irq 17 at
device 5.0 on pci1
atapci0: <ATI IXP400 SATA150 controller> port 0x6000-0x6007,0x5000-0x5003,0x4000-0x4007,0x3000-0x3003,0x2000-0x
200f mem 0xfe9ff000-0xfe9ff1ff irq 23 at device 17.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <ATI IXP400 SATA150 controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x
700f mem 0xfe9ff800-0xfe9ff9ff irq 22 at device 18.0 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
ohci0: <ATI SB400 USB Controller> mem 0xfe9fe000-0xfe9fefff irq 19 at device 19.0 on pci0
ohci0: [ITHREAD]
usbus0: <ATI SB400 USB Controller> on ohci0
ohci1: <ATI SB400 USB Controller> mem 0xfe9fd000-0xfe9fdfff irq 19 at device 19.1 on pci0
ohci1: [ITHREAD]
usbus1: <ATI SB400 USB Controller> on ohci1
ehci0: <ATI SB400 USB 2.0 controller> mem 0xfe9fc000-0xfe9fcfff irq 19 at device 19.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <ATI SB400 USB 2.0 controller> on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1
on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci2
ata1: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <MPTable PCI-PCI bridge> at device 20.4 on pci0
pci2: <PCI bus> on pcib2
pci2: <simple comms> at device 3.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
rl0: [ITHREAD]
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102600001026
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
unknown: <PNP0c01> cant assign resources (memory)
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 pnpid PNP0401 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0c02> cant assign resources (port)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> cant assign resources (memory)
driver bug: Unable to set devclass (devname: (null))
unknown: <PNP0c02> cant assign resources (port)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102600001026
device_attach: est0 attach returned 6
Timecounter TSC frequency 3199117776 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
acd0: DVDR <TSSTcorpCD/DVDW TS-H552L/0614> at ata1-master UDMA33
acd1: DMA limited to UDMA33, device found non-ATA66 cable
acd1: DVDROM <IDE-DVD DROM6216/HD08> at ata1-slave UDMA33
ad8: DMA limited to UDMA33, device found non-ATA66 cable
ad8: 238475MB <Seagate ST3250823AS 3.03> at ata4-master UDMA33
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
Root mount waiting for: usbus2
uhub2: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad8s1a
ugen1.2: <vendor 0x058f> at usbus1
umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe0:umass-sim0:0:0:2): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI status: Check Condition
(probe0:umass-sim0:0:0:2): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da2 at umass-sim0 bus 0 scbus0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI status: Check Condition
(probe0:umass-sim0:0:0:3): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da3 at umass-sim0 bus 0 scbus0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present