Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2011-11-15 08:48:23
From: Maciej Suszko
Description: HP Proliant ML110 G2
Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RC2 #0: Tue Nov 15 08:16:45 CET 2011 root@host:/usr/obj/usr/src/sys/HOST amd64 CPU: Intel(R) Celeron(R) CPU 2.80GHz (2800.17-MHz K8-class CPU) Origin = GenuineIntel Id = 0xf41 Family = f Model = 4 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x651d<SSE3,DTES64,MON,DS_CPL,TM2,CNXT-ID,CX16,xTPR> AMD Features=0x20100800<SYSCALL,NX,LM> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3348045824 (3192 MB) Event timer LAPIC quality 400 ACPI APIC Table: <PTLTD APIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 aac0: <Adaptec SATA RAID 2410SA> mem 0xd8000000-0xdbffffff irq 26 at device 3.0 on pci2 aac0: Enable Raw I/O aac0: New comm. interface enabled aac0: Adaptec 2410SA, aac driver 2.1.9-1 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib3: failed to allocate initial I/O port window: 0-0xfff pcib3: failed to allocate initial memory window: 0-0xfffff pcib3: failed to allocate initial prefetch window: 0-0xfffff pci3: <ACPI PCI bus> on pcib3 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x3000-0x301f irq 23 at device 29.0 on pci0 usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x3020-0x303f irq 19 at device 29.1 on pci0 usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0 usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x3060-0x307f irq 16 at device 29.3 on pci0 usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd4000000-0xd40003ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x4400-0x443f mem 0xd4200000-0xd421ffff irq 20 at device 1.0 on pci10 em0: Ethernet address: [_MAC_XXXXXXXXXX] vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xd5000000-0xd5ffffff,0xd4220000-0xd4220fff irq 21 at device 3.0 on pci10 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <Intel ICH6 SATA150 controller> port 0x30e0-0x30e7,0x30d8-0x30db,0x30d0-0x30d7,0x30c4-0x30c7,0x30b0-0x30bf mem 0xd4000400-0xd40007ff irq 19 at device 31.2 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer RTC frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter i8254 frequency 1193182 Hz quality 0 Event timer i8254 frequency 1193182 Hz quality 100 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec aacd0: <Volume> on aac0 aacd0: 476937MB (976768768 sectors) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ada0 at ata2 bus 0 scbus2 target 0 lun 0 ada0: <SAMSUNG HE103UJ 1AA01118> ATA-7 SATA 2.x device ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ata2 bus 0 scbus2 target 1 lun 0 ada1: <SAMSUNG HE103UJ 1AA01118> ATA-7 SATA 2.x device ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad5 ada2 at ata3 bus 0 scbus3 target 0 lun 0 ada2: <SAMSUNG HE103UJ 1AA01118> ATA-7 SATA 2.x device ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad6 ada3 at ata3 bus 0 scbus3 target 1 lun 0 ada3: <SAMSUNG HE103UJ 1AA01118> ATA-7 SATA 2.x device ada3: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad7 pass0 at ata0 bus 0 scbus0 target 0 lun 0 pass0: <HL-DT-ST DVDRAM GSA-H42N RL00> Removable CD-ROM SCSI-0 device pass0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) Timecounter TSC frequency 2800165421 Hz quality 1000 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered GEOM_MIRROR: Device mirror/swapfs launched (4/4). Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from zfs:rpool/ROOT/freebsd []... em0: link state changed to UP