Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2012-01-21 20:19:16
From: ike
Description: 10x Gigabit Etthernet (Running PFSense): SuperMicro Front-I/O chassis, 3420 Board, plus 4 port Supermicro Gigabit Low Profile, plus 4 port Supermicro Gigabit UIO nic card
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:15:35 EST 2011
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz (2400.01-MHz K8-class CPU)
  Origin = GenuineIntel  Id = 0x106e5  Family = 6  Model = 1e  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8238579712 (7856 MB)
ACPI APIC Table: <060310 APIC1127>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ioapic0: Changing APIC ID to 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
wlan: mac acl policy registered
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e10, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548d0, 0) error 1
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cd0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d70, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <SMCI > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x9B, should be 0x98 (20100331/tbutils-354)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter HPET frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xfafe0000-0xfaffffff irq 16 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x9c00-0x9c1f mem 0xfb0e0000-0xfb0fffff,0xfb0c0000-0xfb0dffff irq 17 at device 0.0 on pci3
em0: Using an MSI interrupt
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x9880-0x989f mem 0xfb080000-0xfb09ffff,0xfb060000-0xfb07ffff irq 18 at device 0.1 on pci3
em1: Using an MSI interrupt
em1: [FILTER]
pcib4: <PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci4: <PCI bus> on pcib4
em2: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xac00-0xac1f mem 0xfb1e0000-0xfb1fffff,0xfb1c0000-0xfb1dffff irq 18 at device 0.0 on pci4
em2: Using an MSI interrupt
em2: [FILTER]
em3: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xa880-0xa89f mem 0xfb180000-0xfb19ffff,0xfb160000-0xfb17ffff irq 19 at device 0.1 on pci4
em3: Using an MSI interrupt
em3: [FILTER]
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> mem 0xfb2e0000-0xfb2fffff irq 16 at device 0.0 on pci5
pci6: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> irq 17 at device 1.0 on pci6
pci7: <PCI bus> on pcib7
igb0: <Intel(R) PRO/1000 Network Connection version - 2.2.3> port 0xbc00-0xbc1f mem 0xfb3e0000-0xfb3fffff,0xfb3c0000-0xfb3dffff,0xfb39c000-0xfb39ffff irq 17 at device 0.0 on pci7
igb0: Using MSIX interrupts with 5 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb1: <Intel(R) PRO/1000 Network Connection version - 2.2.3> port 0xb880-0xb89f mem 0xfb360000-0xfb37ffff,0xfb340000-0xfb35ffff,0xfb31c000-0xfb31ffff irq 18 at device 0.1 on pci7
igb1: Using MSIX interrupts with 5 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
pcib8: <PCI-PCI bridge> irq 18 at device 2.0 on pci6
pci8: <PCI bus> on pcib8
igb2: <Intel(R) PRO/1000 Network Connection version - 2.2.3> port 0xcc00-0xcc1f mem 0xfb4e0000-0xfb4fffff,0xfb4c0000-0xfb4dffff,0xfb49c000-0xfb49ffff irq 18 at device 0.0 on pci8
igb2: Using MSIX interrupts with 5 vectors
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb3: <Intel(R) PRO/1000 Network Connection version - 2.2.3> port 0xc880-0xc89f mem 0xfb460000-0xfb47ffff,0xfb440000-0xfb45ffff,0xfb41c000-0xfb41ffff irq 19 at device 0.1 on pci8
igb3: Using MSIX interrupts with 5 vectors
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
pci0: <base peripheral> at device 8.0 (no driver attached)
pci0: <base peripheral> at device 8.1 (no driver attached)
pci0: <base peripheral> at device 8.2 (no driver attached)
pci0: <base peripheral> at device 8.3 (no driver attached)
pci0: <base peripheral> at device 16.0 (no driver attached)
pci0: <base peripheral> at device 16.1 (no driver attached)
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfaefc000-0xfaefc3ff irq 21 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci10: <ACPI PCI bus> on pcib10
em4: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xdc00-0xdc1f mem 0xfb5e0000-0xfb5fffff,0xfb5dc000-0xfb5dffff irq 16 at device 0.0 on pci10
em4: Using MSIX interrupts with 3 vectors
em4: [ITHREAD]
em4: [ITHREAD]
em4: [ITHREAD]
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci11: <ACPI PCI bus> on pcib11
em5: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xec00-0xec1f mem 0xfb6e0000-0xfb6fffff,0xfb6dc000-0xfb6dffff irq 17 at device 0.0 on pci11
em5: Using MSIX interrupts with 3 vectors
em5: [ITHREAD]
em5: [ITHREAD]
em5: [ITHREAD]
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfaefa000-0xfaefa3ff irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfb7fc000-0xfb7fffff,0xfb800000-0xfbffffff irq 23 at device 3.0 on pci12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PCH SATA300 controller> port 0x8400-0x8407,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x849f mem 0xfaef8000-0xfaef87ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.30 controller with 6 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
uart2: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 476940MB <WDC WD5003ABYX-01WERA0 01.01S01> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp> at usbus0
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/ad4s1a
pflog0: promiscuous mode enabled
carp4: changing name to vip141
vip141: INIT -> MASTER (preempting)
vip141: link state changed to UP
carp5: changing name to vip142
vip142: INIT -> MASTER (preempting)
vip142: link state changed to UP