Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2012-04-04 00:43:22
From: gdm
Description: Intel S5500BC
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Feb 7 13:36:09 CST 2012
[_EMAIL_XXXXXXXXXXX]:/usr/obj/usr/src/sys/BARTON amd64
CPU: Genuine Intel(R) CPU 000 @ 2.27GHz (2266.69-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Family = 6 Model = 1a Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16432562176 (15671 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL S5500BC >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5500BC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x5000-0x501f mem 0xb1f00000-0xb1f1ffff,0xb1e00000-0xb1efffff,0xb1f20000-0xb1f23fff irq 28 at device 0.0 on pci1
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xb1d10000-0xb1d13fff,0xb1d00000-0xb1d0ffff irq 24 at device 0.0 on pci2
mpt0: MPI Version=1.5.20.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mpt1: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb1c10000-0xb1c13fff,0xb1c00000-0xb1c0ffff irq 30 at device 0.0 on pci3
mpt1: MPI Version=1.5.20.0
mpt1: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt1: 0 Active Volumes (2 Max)
mpt1: 0 Hidden Drive Members (14 Max)
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mpt2: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0xb1b10000-0xb1b13fff,0xb1b00000-0xb1b0ffff irq 32 at device 0.0 on pci4
mpt2: MPI Version=1.5.20.0
mpt2: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt2: 0 Active Volumes (2 Max)
mpt2: 0 Hidden Drive Members (14 Max)
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x6100-0x611f mem 0xb2000000-0xb201ffff,0xb2023000-0xb2023fff irq 20 at device 25.0 on pci0
em1: Using an MSI interrupt
em1: Ethernet address: [_MAC_XXXXXXXXXX]
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x60e0-0x60ff irq 19 at device 26.0 on pci0
uhci0: LegSup = 0x3000
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x60c0-0x60df irq 19 at device 26.1 on pci0
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x60a0-0x60bf irq 19 at device 26.2 on pci0
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xb2022000-0xb20223ff irq 19 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ath0: <Atheros 5416> mem 0xb1a00000-0xb1a0ffff irq 16 at device 0.0 on pci5
ath0: [HT] enabling HT modes
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR5418 mac 12.10 RF2133 phy 8.1
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci6
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x6080-0x609f irq 16 at device 29.0 on pci0
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x6060-0x607f irq 16 at device 29.1 on pci0
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x6040-0x605f irq 16 at device 29.2 on pci0
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xb2021000-0xb20213ff irq 16 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
em2: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x1000-0x103f mem 0xb1920000-0xb193ffff,0xb1900000-0xb191ffff irq 16 at device 0.0 on pci7
em2: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH10 AHCI SATA controller> port 0x6128-0x612f,0x6134-0x6137,0x6120-0x6127,0x6130-0x6133,0x6020-0x603f mem 0xb2020000-0xb20207ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
qpi0: <QPI system bus> on motherboard
pcib8: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib8
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x578 offMax=0x730
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <American Power Conversion> at usbus1
da0 at mpt0 bus 0 scbus0 target 2 lun 0
da0: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1 at mpt0 bus 0 scbus0 target 3 lun 0
da1: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mpt0 bus 0 scbus0 target 4 lun 0
da2: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mpt0 bus 0 scbus0 target 5 lun 0
da3: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da4 at mpt0 bus 0 scbus0 target 6 lun 0
da4: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mpt0 bus 0 scbus0 target 7 lun 0
da5: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da7 at mpt1 bus 0 scbus2 target 0 lun 0
da7: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da6 at mpt0 bus 0 scbus0 target 10 lun 0
da6: <ATA OCZ-VERTEX2 1.23> Fixed Direct Access SCSI-5 device
da6: 300.000MB/s transfers
da6: Command Queueing enabled
da6: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
da8 at mpt1 bus 0 scbus2 target 1 lun 0
da8: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da8: 300.000MB/s transfers
da8: Command Queueing enabled
da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da9 at mpt1 bus 0 scbus2 target 2 lun 0
da9: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da9: 300.000MB/s transfers
da9: Command Queueing enabled
da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da10 at mpt1 bus 0 scbus2 target 3 lun 0
da10: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da10: 300.000MB/s transfers
da10: Command Queueing enabled
da10: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da11 at mpt1 bus 0 scbus2 target 4 lun 0
da11: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da11: 300.000MB/s transfers
da11: Command Queueing enabled
da11: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da12 at mpt1 bus 0 scbus2 target 5 lun 0
da12: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da12: 300.000MB/s transfers
da12: Command Queueing enabled
da12: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da13 at mpt1 bus 0 scbus2 target 6 lun 0
da13: <ATA SAMSUNG HD203WI 0002> Fixed Direct Access SCSI-5 device
da13: 300.000MB/s transfers
da13: Command Queueing enabled
da13: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da14 at mpt1 bus 0 scbus2 target 7 lun 0
da14: <ATA WDC WD6400AAKS-7 3B01> Fixed Direct Access SCSI-5 device
da14: 300.000MB/s transfers
da14: Command Queueing enabled
da14: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da15 at mpt2 bus 0 scbus4 target 0 lun 0
da15: <ATA WDC WD6400AAKS-7 3B01> Fixed Direct Access SCSI-5 device
da15: 300.000MB/s transfers
da15: Command Queueing enabled
da15: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da16 at mpt2 bus 0 scbus4 target 1 lun 0
da16: <ATA WDC WD6400AAKS-7 3B01> Fixed Direct Access SCSI-5 device
da16: 300.000MB/s transfers
da16: Command Queueing enabled
da16: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da17 at mpt2 bus 0 scbus4 target 2 lun 0
da17: <ATA WDC WD6400AAKS-7 3B01> Fixed Direct Access SCSI-5 device
da17: 300.000MB/s transfers
da17: Command Queueing enabled
da17: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da18 at mpt2 bus 0 scbus4 target 3 lun 0
da18: <ATA WDC WD6400AAKS-7 3B01> Fixed Direct Access SCSI-5 device
da18: 300.000MB/s transfers
da18: Command Queueing enabled
da18: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da19 at mpt2 bus 0 scbus4 target 4 lun 0
da19: <ATA WDC WD6400AAKS-7 3B01> Fixed Direct Access SCSI-5 device
da19: 300.000MB/s transfers
da19: Command Queueing enabled
da19: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da20 at mpt2 bus 0 scbus4 target 5 lun 0
da20: <ATA WDC WD6400AAKS-0 3B01> Fixed Direct Access SCSI-5 device
da20: 300.000MB/s transfers
da20: Command Queueing enabled
da20: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da21 at mpt2 bus 0 scbus4 target 6 lun 0
da21: <ATA WDC WD6400AAKS-0 3B01> Fixed Direct Access SCSI-5 device
da21: 300.000MB/s transfers
da21: Command Queueing enabled
da21: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da22 at mpt2 bus 0 scbus4 target 7 lun 0
da22: <ATA WDC WD6400AAKS-0 3B01> Fixed Direct Access SCSI-5 device
da22: 300.000MB/s transfers
da22: Command Queueing enabled
da22: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
GEOM: da6: the secondary GPT header is not in the last LBA.
GEOM: da15: corrupt or invalid GPT detected.
GEOM: da15: GPT rejected -- may not be recoverable.
ugen2.2: <American Megatrends Inc.> at usbus2
ukbd0: <Keyboard Interface> on usbus2
kbd0 at ukbd0
ums0: <Mouse Interface> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
ugen1.3: <American Power Conversion> at usbus1
Trying to mount root from zfs:root0 []...
vboxnet0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap1: Ethernet address: [_MAC_XXXXXXXXXX]
tap2: Ethernet address: [_MAC_XXXXXXXXXX]
tap3: Ethernet address: [_MAC_XXXXXXXXXX]
tap4: Ethernet address: [_MAC_XXXXXXXXXX]
em0: link state changed to UP
tap1: changing name to 'vm_towel0'