Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2012-12-29 17:04:21
From: ray
Description: Efika MX Smarttop
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #51 r244708:244753M: Sat Dec 29 23:44:19 EET 2012
[_EMAIL_XXXXXXXXXXX]:/usr/obj/arm.armv6/usr/home/ray/work/FreeBSD/Projects/Efika_MX/src/efika_mx/sys/EFIKA_MX arm
Preloaded elf kernel "kernel" at 0xc057f210.
CPU: Cortex A8-r2 rev 5 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:1
Cache level 1:
32KB/64B 4-way data cache WT WB Read-Alloc
32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 536870912 (512 MB)
Physical memory chunk(s):
0x90000000 - 0x900fffff, 1048576 bytes (256 pages)
0x90647000 - 0xaf5a9fff, 519450624 bytes (126819 pages)
avail memory = 517615616 (493 MB)
wlan: <802.11 Link Layer>
null: <null device, zero device>
openfirm: <Open Firmware control device>
random: <entropy source, Software, Yarrow>
mem: <memory>
nfslock: pseudo-device
fdtbus0: <FDT main bus>
simplebus0: <Flattened device tree simple bus> on fdtbus0
tzic0: <TrustZone Interrupt Controller> mem 0xe0000000-0xe0003fff on simplebus0
simplebus1: <Flattened device tree simple bus> on fdtbus0
simplebus2: <Flattened device tree simple bus> on simplebus1
imxccm0: <Freescale Clock Control Module> mem 0x73fd4000-0x73fd7fff,0x83f80000-0x83f83fff,0x83f84000-0x83f87fff,0x83f88000-0x83f8bfff irq 71,72 on simplebus2
imxccm0: PLL1=800MHz, PLL2=665MHz, PLL3=216MHz
imxccm0: CPU clock=800000000, UART clock=66500000
imxccm0: mainbus clock=665000000, ahb clock=133000000 ipg clock=66500000 perclk=2000000
gpio0: <i.MX515 GPIO Controller> mem 0x73f84000-0x73f87fff irq 50,51,42,43,44,45,46,47,48,49 on simplebus2
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
gpio1: <i.MX515 GPIO Controller> mem 0x73f88000-0x73f8bfff irq 52,53 on simplebus2
simplebus2: no default resources for rid = 2, type = 1
gpioc1: <GPIO controller> on gpio1
gpiobus1: <GPIO bus> on gpio1
gpio2: <i.MX515 GPIO Controller> mem 0x73f8c000-0x73f8ffff irq 54,55 on simplebus2
simplebus2: no default resources for rid = 2, type = 1
gpioc2: <GPIO controller> on gpio2
gpiobus2: <GPIO bus> on gpio2
gpio3: <i.MX515 GPIO Controller> mem 0x73f90000-0x73f93fff irq 56,57 on simplebus2
simplebus2: no default resources for rid = 2, type = 1
gpioc3: <GPIO controller> on gpio3
gpiobus3: <GPIO bus> on gpio3
simplebus3: <Flattened device tree simple bus> on simplebus2
ehci0: <Freescale integrated USB controller> mem 0x73f80000-0x73f83fff irq 18,14,16,17 on simplebus2
ehci0: [GIANT-LOCKED]
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
ehci0: [GIANT-LOCKED]
usbus1: EHCI version 1.0
usbus1 on ehci0
ehci0: usbpf: Attached
ehci0: [GIANT-LOCKED]
usbus2: EHCI version 1.0
usbus2 on ehci0
ehci0: usbpf: Attached
ehci0: [GIANT-LOCKED]
usbus3: EHCI version 1.0
usbus3 on ehci0
ehci0: usbpf: Attached
imx_wdog0: <Freescale i.MX5xx Watchdog Timer> mem 0x73f98000-0x73f9bfff irq 58 on simplebus2
imx_gpt0: <Freescale i.MXxxx GPT timer> mem 0x73fa0000-0x73fa3fff irq 39 on simplebus2
imx_gpt0: Run on 66500KHz clock.
Event timer "i.MXxxx GPT Eventtimer" frequency 100000 Hz quality 1000
Timecounter "i.MX GPT Timecounter" frequency 100000 Hz quality 500
clock: hz=100 stathz = 0
imx_gpt0: timer clock frequency 100000
imx_iomux0: <Freescale i.MX51 IO pins multiplexor> mem 0x73fa8000-0x73fabfff irq 7 on simplebus2
uart0: <imx_uart> mem 0x73fbc000-0x73fbffff irq 31 on simplebus2
uart0: fast interrupt
uart0: console (115200,n,8,1)
simplebus4: <Flattened device tree simple bus> on simplebus1
i2c0: <I2C bus controller> mem 0x83fc4000-0x83fc7fff irq 63 on simplebus4
iicbus0: <Philips I2C bus> on i2c0
iic0: <I2C generic I/O> on iicbus0
i2c1: <I2C bus controller> mem 0x83fc8000-0x83fcbfff irq 62 on simplebus4
iicbus1: <Philips I2C bus> on i2c1
iic1: <I2C generic I/O> on iicbus1
atapci0: <Freescale Integrated PATA Controller> mem 0x83fe0000-0x83fe3fff irq 70 on simplebus4
ata2: <ATA channel> at channel 0 on atapci0
simplebus5: <Flattened device tree simple bus> on fdtbus0
fb0: <i.MX515 Image Processing Unit (FB)> mem 0x5e000000-0x5e007fff,0x5e008000-0x5e00ffff,0x5e018000-0x5e01ffff,0x5e020000-0x5e027fff,0x5e028000-0x5e02ffff,0x5e030000-0x5e037fff,0x5e038000-0x5e03ffff,0x5e040000-0x5e047fff,0x5e048000-0x5e04ffff,0x5e050000-0x5e057fff,0x5e058000-0x5e05ffff,0x5e060000-0x5e067fff,0x5e068000-0x5e06ffff,0x5f000000-0x5f01ffff,0x5f020000-0x5f03ffff,0x5f040000-0x5f05ffff,0x5f060000-0x5f07ffff,0x5f080000-0x5f09ffff irq 10,11 on simplebus5
fb0: clock gate status is 3
sc0: Unknown <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
fb0: : i.MX51 IPUV3 controller
imx_gpt0: switch DELAY to use H/W counter
Timecounters tick every 10.000 msec
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
lo0: bpf attached
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale> at usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Freescale> at usbus2
uhub2: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ugen3.1: <Freescale> at usbus3
uhub3: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <Flash Module Ver2.M11> ATA-5 device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 16.700MB/s transfers (PIO4, PIO 512bytes)
ada0: 14719MB (30146256 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
pass0 at ata2 bus 0 scbus0 target 0 lun 0
pass0: <Flash Module Ver2.M11> ATA-5 device
pass0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
pass0: 16.700MB/s transfers (PIO4, PIO 512bytes)
GEOM: new disk ada0
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x0424> at usbus1
uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub4: MTT enabled
Root mount waiting for: usbus1
uhub4: 4 ports with 2 removable, self powered
Root mount waiting for: usbus1
ugen1.3: <vendor 0x04d9> at usbus1
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/0.50, addr 3> on usbus1
kbd: new array size 4
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/0.50, addr 3> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=4
Root mount waiting for: usbus1
ugen1.4: <vendor 0x2001> at usbus1
axe0: <vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4> on usbus1
axe0: PHYADDR 0xe0:0x03
Trying to mount root from ufs:ada0s2a []...
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
miibus0: <MII bus> on axe0
rlphy0: <IP101 10/100 PHY> PHY 3 on miibus0
rlphy0: OUI 0x0009c3, model 0x0005, rev. 4
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on axe0
ue0: bpf attached
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
Setting hostuuid: 0d74d9c5-da2f-11e1-b9b6-8a3af74f1c98.
Setting hostid: 0x1a7a9414.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_pointsha256: /kernel: No such file or directory
kickstart.
Starting file system checks:
Mounting local file systems:.
Writing entropy file:.
Setting hostname: hornet.
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet[_IP_XXXX] netmask 0xff000000
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether [_MAC_XXXXXXXXXX]
inet[_IP_XXXXXXXX] netmask 0xffffff00 broadcast[_IP_XXXXXXXXX]
media: Ethernet autoselect (none)
status: no carrier
Starting devd.
Starting ums0 moused.
add net default: gateway[_IP_XXXXXXXX]
Creating and/or trimming log files.
Starting syslogd.
Starting watchdogd.
imx_wdog0: WARNING: watchdog can't be disabled!!!<118>realpath: /dev/dumpdev: No such file or directory
/etc/rc: WARNING: Dump device does not exist. Savecore not run.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
Clearing /tmp (X related).
Updating motd:.
Configuring syscons: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting inetd.
Wed Dec 26 03:28:07 UTC 2012