Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2014-01-20 11:41:21
From: Fred
Description: OpenBSD 5.5-beta Sharp Zaurus
OpenBSD 5.5-beta (GENERIC) #37: Tue Jan 14 00:43:49 MST 2014
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/zaurus/compile/GENERIC
real mem = 67108864 (64MB)
avail mem = 58281984 (55MB)
mainbus0 at root
cpu0 at mainbus0: PXA27x step C-5 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
pxaip0 at mainbus0: CPU clock = 416.000 MHz
pxaintc0 at pxaip0 addr 0x40d00000: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000: GPIO Controller
pxadmac0 at pxaip0 addr 0x40000000 intr 25: DMA Controller
pxaost0 at pxaip0 addr 0x40a00000
com0 at pxaip0 addr 0x40100000 intr 22: pxa2x0, 32 byte fifo
com1 at pxaip0 addr 0x40200000 intr 21: pxa2x0, 32 byte fifo
com2 at pxaip0 addr 0x40700000 intr 20: pxa2x0, 32 byte fifo (SIR)
ohci0 at pxaip0, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "PXA27x OHCI root hub" rev 1.00/1.00 addr 1
lcd0 at pxaip0
wsdisplay0 at lcd0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1 added (std, vt100 emulation)
zkbd0 at pxaip0
wskbd0 at zkbd0: console keyboard, using wsdisplay0
scoop0 at pxaip0: PCMCIA/GPIO controller
scoop1 at pxaip0: PCMCIA/GPIO controller
pxapcic0 at pxaip0: 2 slots
pcmcia0 at pxapcic0
pcmcia1 at pxapcic0
pxammc0 at pxaip0: MMC/SD/SDIO controller
sdmmc0 at pxammc0
zssp0 at pxaip0
apm0 at pxaip0
zts0 at pxaip0
wsmouse0 at zts0 mux 0
zaudio0 at pxaip0: I2C, I2S, WM8750 Audio
audio0 at zaudio0
zrc0 at pxaip0: CE-RH2 remote control
wskbd1 at zrc0 mux 1
wskbd1: connecting to wsdisplay0
flash0 at pxaip0: Samsung K9F1G08U0A 128Mx8 3.3V
pxaudc0 at pxaip0: USB Device Controller
usbf0 at pxaudc0: USB revision 1.1
cdcef0 at usbf0: address [_MAC_XXXXXXXXXX]
wdc0 at pcmcia0 function 0 "HITACHI, microdrive" port 0x0/16: irq 138
wd0 at wdc0 channel 0 drive 0: <HMS360606D5CF00>
wd0: 32-sector PIO, LBA, 5859MB, 12000556 sectors
wd0(wdc0:0:0): using BIOS timings
ne0 at pcmcia1 function 0 "CF, 100Base-Ethernet, V" port 0x300/32, irq 137, address [_MAC_XXXXXXXXXX]
ukphy0 at ne0 phy 16: Generic IEEE 802.3u media interface, rev. 0: OUI 0x00602e, model 0x0031
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 15193MB, 512 bytes/sector, 31116288 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: wd0
root on wd0a (0f5bf2cbf1bc39fd.a) swap on wd0b dump on wd0b