Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2014-03-11 20:36:30
From: ike
Description: pfSense 2.1.1 prerelease - 10Gbit Fiber Quad - Supermicro with Two dual 10Gbit Intel (ix) , fiber SFP's
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p11 #0: Wed Sep 11 18:51:23 EDT 2013
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3300.05-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Family = 6  Model = 3a  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x77bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,<b30>>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8598323200 (8200 MB)
avail memory = 8224579584 (7843 MB)
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20101013/tbfadt-392)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804a5da0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff804a5e40, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804a5ee0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe020-0xe03f mem 0xf6280000-0xf62fffff,0xf6304000-0xf6307fff irq 16 at device 0.0 on pci1
ix0: Using MSIX interrupts with 5 vectors
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe000-0xe01f mem 0xf6200000-0xf627ffff,0xf6300000-0xf6303fff irq 17 at device 0.1 on pci1
ix1: Using MSIX interrupts with 5 vectors
ix1: RX Descriptors exceed system mbuf max, using default instead!
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd020-0xd03f mem 0xf6080000-0xf60fffff,0xf6104000-0xf6107fff irq 17 at device 0.0 on pci3
ix2: Using MSIX interrupts with 5 vectors
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd000-0xd01f mem 0xf6000000-0xf607ffff,0xf6100000-0xf6103fff irq 18 at device 0.1 on pci3
ix3: Using MSIX interrupts with 5 vectors
ix3: RX Descriptors exceed system mbuf max, using default instead!
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
pci0: <serial bus, USB> at device 20.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7b14000-0xf7b143ff irq 16 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xc000-0xc01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 18 at device 0.0 on pci6
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xb000-0xb01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 19 at device 0.0 on pci7
em1: Using MSIX interrupts with 3 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7b13000-0xf7b133ff irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19 at device 3.0 on pci8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Panther Point SATA300 controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7b12000-0xf7b127ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.30 controller with 6 6Gbps ports, PM not supported
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
uart2: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 239429MB <WDC WD2503ABYZ-011FA0 01.01S03> at ata2-master UDMA100 SATA 6Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <Chicony> at usbus1
ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
kbd2 at ukbd0
uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usb_alloc_device: Failure selecting configuration index 0:USB_ERR_TIMEOUT, port 2, addr 3 (ignored)
ugen0.3: <Winbond Electronics Corp> at usbus0
Trying to mount root from ufs:/dev/ad4s1a
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
ix0: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix0: link state changed to UP
ix1: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix1: link state changed to UP
ix2: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix2: link state changed to UP
em0: link state changed to UP
ix3: 
ix3: link state changed to UP

CRITICAL: ECC ERROR!! Please Reboot!!
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p11 #0: Wed Sep 11 18:51:23 EDT 2013
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3300.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Family = 6  Model = 3a  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x77bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,<b30>>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8598323200 (8200 MB)
avail memory = 8224579584 (7843 MB)
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20101013/tbfadt-392)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804a5da0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff804a5e40, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804a5ee0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe020-0xe03f mem 0xf6280000-0xf62fffff,0xf6304000-0xf6307fff irq 16 at device 0.0 on pci1
ix0: Using MSIX interrupts with 5 vectors
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe000-0xe01f mem 0xf6200000-0xf627ffff,0xf6300000-0xf6303fff irq 17 at device 0.1 on pci1
ix1: Using MSIX interrupts with 5 vectors
ix1: RX Descriptors exceed system mbuf max, using default instead!
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd020-0xd03f mem 0xf6080000-0xf60fffff,0xf6104000-0xf6107fff irq 17 at device 0.0 on pci3
ix2: Using MSIX interrupts with 5 vectors
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd000-0xd01f mem 0xf6000000-0xf607ffff,0xf6100000-0xf6103fff irq 18 at device 0.1 on pci3
ix3: Using MSIX interrupts with 5 vectors
ix3: RX Descriptors exceed system mbuf max, using default instead!
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
pci0: <serial bus, USB> at device 20.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7b14000-0xf7b143ff irq 16 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xc000-0xc01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 18 at device 0.0 on pci6
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xb000-0xb01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 19 at device 0.0 on pci7
em1: Using MSIX interrupts with 3 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7b13000-0xf7b133ff irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19 at device 3.0 on pci8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Panther Point SATA300 controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7b12000-0xf7b127ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.30 controller with 6 6Gbps ports, PM not supported
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
uart2: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 239429MB <WDC WD2503ABYZ-011FA0 01.01S03> at ata2-master UDMA100 SATA 6Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <Chicony> at usbus1
ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
kbd2 at ukbd0
uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
ugen0.3: <Winbond Electronics Corp> at usbus0
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ukbd1: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd3 at ukbd1
Trying to mount root from ufs:/dev/ad4s1a
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
ix0: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix0: link state changed to UP
ix1: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix1: link state changed to UP
ix2: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix2: link state changed to UP
ix3: 
CRITICAL: ECC ERROR!! Please Reboot!!
em0: link state changed to UP
ix3: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p11 #0: Wed Sep 11 18:51:23 EDT 2013
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3300.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Family = 6  Model = 3a  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x77bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,<b30>>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8598323200 (8200 MB)
avail memory = 8224579584 (7843 MB)
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20101013/tbfadt-392)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804a5da0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff804a5e40, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804a5ee0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe020-0xe03f mem 0xf6280000-0xf62fffff,0xf6304000-0xf6307fff irq 16 at device 0.0 on pci1
ix0: Using MSIX interrupts with 5 vectors
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe000-0xe01f mem 0xf6200000-0xf627ffff,0xf6300000-0xf6303fff irq 17 at device 0.1 on pci1
ix1: Using MSIX interrupts with 5 vectors
ix1: RX Descriptors exceed system mbuf max, using default instead!
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd020-0xd03f mem 0xf6080000-0xf60fffff,0xf6104000-0xf6107fff irq 17 at device 0.0 on pci3
ix2: Using MSIX interrupts with 5 vectors
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd000-0xd01f mem 0xf6000000-0xf607ffff,0xf6100000-0xf6103fff irq 18 at device 0.1 on pci3
ix3: Using MSIX interrupts with 5 vectors
ix3: RX Descriptors exceed system mbuf max, using default instead!
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
pci0: <serial bus, USB> at device 20.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7b14000-0xf7b143ff irq 16 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xc000-0xc01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 18 at device 0.0 on pci6
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xb000-0xb01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 19 at device 0.0 on pci7
em1: Using MSIX interrupts with 3 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7b13000-0xf7b133ff irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19 at device 3.0 on pci8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Panther Point SATA300 controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7b12000-0xf7b127ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.30 controller with 6 6Gbps ports, PM not supported
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
uart2: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 239429MB <WDC WD2503ABYZ-011FA0 01.01S03> at ata2-master UDMA100 SATA 6Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp> at usbus0
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
ugen1.3: <Chicony> at usbus1
ukbd1: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
kbd3 at ukbd1
uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
ix0: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix0: link state changed to UP
ix1: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix1: link state changed to UP
ix2: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix2: link state changed to UP
em0: link state changed to UP
pflog0: promiscuous mode enabled
ix3: 
CRITICAL: ECC ERROR!! Please Reboot!!
ix3: link state changed to UP
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p14 #1: Fri Mar  7 19:12:53 EST 2014
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3300.05-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Family = 6  Model = 3a  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x77bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,<b30>>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8598323200 (8200 MB)
avail memory = 8224579584 (7843 MB)
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20101013/tbfadt-392)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804a5da0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff804a5e40, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804a5ee0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe020-0xe03f mem 0xf6280000-0xf62fffff,0xf6304000-0xf6307fff irq 16 at device 0.0 on pci1
ix0: Using MSIX interrupts with 5 vectors
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xe000-0xe01f mem 0xf6200000-0xf627ffff,0xf6300000-0xf6303fff irq 17 at device 0.1 on pci1
ix1: Using MSIX interrupts with 5 vectors
ix1: RX Descriptors exceed system mbuf max, using default instead!
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd020-0xd03f mem 0xf6080000-0xf60fffff,0xf6104000-0xf6107fff irq 17 at device 0.0 on pci3
ix2: Using MSIX interrupts with 5 vectors
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: [ITHREAD]
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xd000-0xd01f mem 0xf6000000-0xf607ffff,0xf6100000-0xf6103fff irq 18 at device 0.1 on pci3
ix3: Using MSIX interrupts with 5 vectors
ix3: RX Descriptors exceed system mbuf max, using default instead!
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: [ITHREAD]
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
pci0: <serial bus, USB> at device 20.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7b14000-0xf7b143ff irq 16 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xc000-0xc01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 18 at device 0.0 on pci6
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xb000-0xb01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 19 at device 0.0 on pci7
em1: Using MSIX interrupts with 3 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7b13000-0xf7b133ff irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19 at device 3.0 on pci8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Panther Point SATA300 controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7b12000-0xf7b127ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.30 controller with 6 6Gbps ports, PM not supported
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
uart2: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 239429MB <WDC WD2503ABYZ-011FA0 01.01S03> at ata2-master UDMA100 SATA 6Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp> at usbus0
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
ugen1.3: <Chicony> at usbus1
ukbd1: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
kbd3 at ukbd1
uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 3> on usbus1
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/ad4s1a
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
ix1: link state changed to UP
ix0: link state changed to UP
ix2: link state changed to UP
pflog0: promiscuous mode enabled
ix3: link state changed to UP
em0: link state changed to UP