Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2014-10-20 20:44:10
From: Sevan / Venture37
Description: IBM ThinkPad X60s 1704-5LG flashed with coreboot SeaBIOS 1.7.5-0-ge51488c
Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v3.8.2-RELEASE #7: Thu Aug 14 21:26:32 PDT 2014
[_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/usr/obj/build/home/justin/src/sys/GENERIC
TSC clock: 1662480220 Hz, i8254 clock: 1193167 Hz
CPU: Genuine Intel(R) CPU 1400 @ 1.66GHz (1662.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,xTPR,PDCM>
AMD Features=0x100000<NX>
real memory = 2137299968 (2038 MB)
avail memory = 2047258624 (1952 MB)
lapic: divisor index 0, frequency 83125413 Hz
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x000F1A30 000024 (v02 CORE )
ACPI: XSDT 0x7F7B60E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x7F7B93E0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0x7F7B6250 00318E (v03 COREv4 COREBOOT 20090419 INTL 20140114)
ACPI: FACS 0x7F7B6210 000040
ACPI: SSDT 0x7F7B94E0 00034A (v02 CORE COREBOOT 0000002A CORE 0000002A)
ACPI: MCFG 0x7F7B9830 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x7F7B9870 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: HPET 0x7F7B98E0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <CORE COREBOOT> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT0._STA] (Node 0xa4b2a774), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xa4b6ff94) [EmbeddedControl] (20140424/evregion-181)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-323)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/psparse-553)
ACPI Error: Method execution failed [\\_SB_.PCI0.LPCB.EC__.BAT1._STA] (Node 0xa4b2a924), AE_NOT_EXIST (20140424/uteval-113)
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x50a0-0x50a7 mem 0xe4400000-0xe443ffff,0xd0000000-0xdfffffff,0xe4300000-0xe437ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
vgapci1: <VGA-compatible display> mem 0xe4380000-0xe43fffff at device 2.1 on pci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 17
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 82573L 7.3.8> port 0x4000-0x401f mem 0xe4100000-0xe411ffff irq 16 at device 0.0 on pci1
em0: MAC address: 00:16:d3:
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xe4200000-0xe4200fff irq 17 at device 0.0 on pci2
wpi0: Driver Revision 20071127
wpi0: Hardware Revision (0x1)
adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2
adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4
adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6
adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8
adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10
adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12
adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14
adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16
adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18
adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20
adding chan 11 (2462MHz) flags=0x2b maxpwr=15 passive=0, offset 22
adding chan 12 (2467MHz) flags=0x21 maxpwr=15 passive=1, offset 24
adding chan 13 (2472MHz) flags=0x21 maxpwr=15 passive=1, offset 26
adding chan 34 (5170MHz) flags=0x21 maxpwr=15 passive=1, offset 27
adding chan 36 (5180MHz) flags=0xab maxpwr=15 passive=0, offset 28
adding chan 38 (5190MHz) flags=0x21 maxpwr=15 passive=1, offset 29
adding chan 40 (5200MHz) flags=0xab maxpwr=15 passive=0, offset 30
adding chan 42 (5210MHz) flags=0x21 maxpwr=15 passive=1, offset 31
adding chan 44 (5220MHz) flags=0xab maxpwr=15 passive=0, offset 32
adding chan 46 (5230MHz) flags=0x21 maxpwr=15 passive=1, offset 33
adding chan 48 (5240MHz) flags=0xab maxpwr=15 passive=0, offset 34
adding chan 52 (5260MHz) flags=0xb1 maxpwr=15 passive=1, offset 35
adding chan 56 (5280MHz) flags=0xb1 maxpwr=15 passive=1, offset 36
adding chan 60 (5300MHz) flags=0xb1 maxpwr=15 passive=1, offset 37
adding chan 64 (5320MHz) flags=0xb1 maxpwr=15 passive=1, offset 38
adding chan 100 (5500MHz) flags=0xb1 maxpwr=16 passive=1, offset 39
adding chan 104 (5520MHz) flags=0xb1 maxpwr=16 passive=1, offset 40
adding chan 108 (5540MHz) flags=0xb1 maxpwr=16 passive=1, offset 41
adding chan 112 (5560MHz) flags=0xb1 maxpwr=16 passive=1, offset 42
adding chan 116 (5580MHz) flags=0xb1 maxpwr=16 passive=1, offset 43
adding chan 120 (5600MHz) flags=0xb1 maxpwr=16 passive=1, offset 44
adding chan 124 (5620MHz) flags=0xb1 maxpwr=16 passive=1, offset 45
adding chan 128 (5640MHz) flags=0xb1 maxpwr=16 passive=1, offset 46
adding chan 132 (5660MHz) flags=0xb1 maxpwr=16 passive=1, offset 47
adding chan 136 (5680MHz) flags=0xb1 maxpwr=16 passive=1, offset 48
adding chan 140 (5700MHz) flags=0xb1 maxpwr=16 passive=1, offset 49
power group 0: chan=1 maxpwr=48 temp=-201
sample 0: index=13 power=44
sample 1: index=29 power=31
sample 2: index=47 power=11
sample 3: index=58 power=0
sample 4: index=77 power=-18
power group 1: chan=44 maxpwr=49 temp=-206
sample 0: index=12 power=40
sample 1: index=19 power=32
sample 2: index=32 power=19
sample 3: index=43 power=8
sample 4: index=77 power=-24
power group 2: chan=64 maxpwr=50 temp=-204
sample 0: index=12 power=41
sample 1: index=20 power=32
sample 2: index=33 power=19
sample 3: index=44 power=10
sample 4: index=77 power=-21
power group 3: chan=116 maxpwr=48 temp=-203
sample 0: index=12 power=37
sample 1: index=20 power=28
sample 2: index=36 power=12
sample 3: index=48 power=1
sample 4: index=77 power=-26
power group 4: chan=153 maxpwr=46 temp=-202
sample 0: index=10 power=35
sample 1: index=20 power=24
sample 2: index=32 power=12
sample 3: index=42 power=4
sample 4: index=77 power=-27
wpi0: Regulatory Domain: MoW2
wpi0: Hardware Type: B
wpi0: Hardware Revision: ?
wpi0: SKU does support 802.11a
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x5000-0x501f irq 16 at device 29.0 on pci0
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x5020-0x503f irq 17 at device 29.1 on pci0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x5040-0x505f irq 18 at device 29.2 on pci0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x5060-0x507f irq 19 at device 29.3 on pci0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe4444000-0xe44443ff irq 19 at device 29.7 on pci0
usbus4: EHCI version 1.0
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe2000000-0xe2000fff irq 16 at device 0.0 on pci5
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Ricoh R5C552> mem 0xe2001000-0xe20017ff irq 17 at device 0.1 on pci5
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:00:00
uhub0: 2 ports with 2 removable, self powered
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
Unknown tcode 14
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
sdhci0: <RICOH R5C822 SD> mem 0xe2001800-0xe20018ff irq 18 at device 0.2 on pci5
sdhci0: 1 slot(s) allocated
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
pci5: <base peripheral> (vendor 0x1180, dev 0x0843) at device 0.3 irq 18
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x5080-0x508f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
disk scheduler: set policy of acd0 to noop
acd0: DVDR <HL-DT-ST DVDRAM GSA-4083N/1.08> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci0
ahci0: <AHCI-PCI-SATA> port 0x5090-0x509f,0x50d4-0x50d7,0x50c0-0x50c7,0x50d0-0x50d3,0x50b8-0x50bf mem 0xe4444400-0xe44447ff at device 31.2 on pci0
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ahci0: Intel hocus pocus
ahci0: AHCI 1.1 cap 0xdf12ff03<S64A,NCQ,SMPS,SSS,SALP,SAL,SCLO,SPM,PMD,SSC,PSC>, 4 ports, 32 tags/port, gen 1 (1.5Gbps)
ahci0.0: Caps 2004<MPSS,POD>
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <vendor 0x17ef> at usbus4
uhub5: <vendor 0x17ef product 0x1000, class 9/0, rev 2.00/0.01, addr 2> on usbus4
uhub5: MTT enabled
uhub5: 4 ports with 4 removable, self powered
ugen3.2: <STMicroelectronics> at usbus3
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.0: Found DISK "FUJITSU MHV2080BH 00840028" serial="NW05T62255HN"
ahci0.0: tags=32/32 satacap=0702 satacap2=0000 satafea=004c NCQ=YES capacity=76319.08MB
ahci0.0: f85=3469 f86=be09 f87=6063 WC=enabled RA=enabled SEC=freezing
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 23
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
acpi_acad1: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
orm0: <Option ROM> at iomem 0xee800-0xeffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio2: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
hpt27xx: no controller detected.
CAM: Configuring 4 busses
CAM: finished configuring all busses
disk scheduler: set policy of da0 to noop
disk scheduler: set policy of cd0 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA FUJITSU MHV2080B 0084> Fixed Direct Access SCSI-4 device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 150.000MB/s transfers
da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4083N 1.08> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from hammer:serno/NW05T62255HN.s3d
HAMMER(ROOT) recovery check seqno=001093a3
HAMMER(ROOT) recovery range 30000000017be470-30000000017be470
HAMMER(ROOT) recovery nexto 30000000017be470 endseqno=001093a4
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 5476k, remaining available: 16384k
Mounting devfs