Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2014-10-26 13:48:57
From: Ypnose
Description: Hewlett-Packard HP ProBook 430 G1 (NetBSD)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1.5 (GENERIC)
total memory = 3753 MB
avail memory = 3629 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0xbd<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP ProBook 430 G1 (A3009DD20303)
mainbus0 (root)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-320)
ACPI Warning: 32/64X length mismatch in Gpe0Block: 256/0 (20110623/tbfadt-556)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz, id 0x40651
cpu1 at mainbus0 apid 1: Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz, id 0x40651
cpu2 at mainbus0 apid 2: Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz, id 0x40651
cpu3 at mainbus0 apid 3: Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz, id 0x40651
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 40 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout0: brightness levels: 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, HPQ8001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN3005) (aux port): irq 12
ACEL (HPQ6007) at acpi0 not configured
MEM2 (PNP0C01) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LIon rechargeable battery
acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
HTAM (PNP0C02) at acpi0 not configured
acpitz0 at acpi0 (CPUZ)
acpitz0: levels: critical 128.0 C, hot 99.0 C, passive cooling
acpitz1 at acpi0 (GFXZ): cpu0
acpitz1: levels: critical 128.0 C, passive 105.0 C, passive cooling
acpitz2 at acpi0 (EXTZ)
acpitz2: levels: critical 128.0 C, passive cooling
acpitz3 at acpi0 (LOCZ)
acpitz3: levels: critical 128.0 C, passive cooling
acpitz4 at acpi0 (BATZ): cpu0
acpitz4: levels: critical 128.0 C, passive 55.0 C, passive cooling
acpitz5 at acpi0 (PCHZ)
acpitz5: levels: critical 128.0 C, passive cooling
acpitz6 at acpi0 (DM1Z)
acpitz6: levels: critical 128.0 C, passive cooling
acpitz7 at acpi0 (DM2Z)
acpitz7: levels: critical 128.0 C, passive cooling
PTID (INT340E) at acpi0 not configured
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.5
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0a04 (rev. 0x0b)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0a16 (rev. 0x0b)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
vendor 0x8086 product 0x9c31 (USB serial bus, interface 0x30, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x9c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg0 at hdaudio1: Sigmatel product 76e0
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Jack & Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x9c10 (rev. 0xe4)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x9c12 (rev. 0xe4)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x10ec product 0x5227 (undefined, subclass 0x00, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x9c14 (rev. 0xe4)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at ioapic0 pin 18
re0: Unknown revision (0x4c000000)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
ukphy0 at re0 phy 7: OUI 0x00e04c, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x9c16 (rev. 0xe4)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x168c product 0x0036 (miscellaneous network, revision 0x01) at pci4 dev 0 function 0 not configured
ehci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x9c26 (rev. 0x04)
ehci0: interrupting at ioapic0 pin 17
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x9c45 (rev. 0x04)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x9c03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xc734ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 148 us, pow 200 mW
acpicpu0: C3: FFH, lat 3145 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 1701 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 15000 mW, 1700 MHz
acpicpu0: P2: FFH, lat 10 us, pow 13939 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12900 mW, 1500 MHz
acpicpu0: P4: FFH, lat 10 us, pow 11882 mW, 1400 MHz
acpicpu0: P5: FFH, lat 10 us, pow 10886 mW, 1300 MHz
acpicpu0: P6: FFH, lat 10 us, pow 9910 mW, 1200 MHz
acpicpu0: P7: FFH, lat 10 us, pow 8956 mW, 1100 MHz
acpicpu0: P8: FFH, lat 10 us, pow 8021 mW, 1000 MHz
acpicpu0: P9: FFH, lat 10 us, pow 7106 mW, 900 MHz
acpicpu0: P10: FFH, lat 10 us, pow 6346 mW, 800 MHz
acpicpu0: P11: FFH, lat 10 us, pow 5470 mW, 782 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
acpiacad0: AC adapter offline.
wd0 at atabus0 drive 0
wd0: <HGST HTS545050A7E380>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub1 at uhub0 port 1: vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2
uhub1: single transaction translator
uhub1: 8 ports with 8 removable, self powered
umass0 at uhub1 port 3 configuration 1 interface 0
umass0: TSST Inc SES084D, rev 2.00/0.00, addr 3
umass0: using ATAPI over Bulk-Only
atapibus0 at umass0: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp, CDDVDW SE-S084D, TS01> cdrom removable
ubt0 at uhub1 port 4
ubt0: vendor 0x0cf3 product 0x311f, rev 1.10/0.01, addr 4
ugen0 at uhub1 port 5
ugen0: vendor 0x138a product 0x003f, rev 1.10/1.04, addr 5
uvideo0 at uhub1 port 7 configuration 1 interface 0: DDFQQ019I5G1E4 HP HD Webcam, rev 2.00/0.08, addr 6
video0 at uvideo0: DDFQQ019I5G1E4 HP HD Webcam, rev 2.00/0.08, addr 6
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: cd0
root on cd0a dumps on cd0b
root file system type: cd9660
warning: no /dev/console
acpibat0: normal capacity on 'charge state'