Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2014-11-22 12:02:58
From: Ypnose
Description: Original Apple MacBook (NetBSD)
NetBSD 6.1.5 (GENERIC) total memory = 988 MB avail memory = 945 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Apple Inc. MacBook4,1 (1.0) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, id 0x10676 cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, id 0x10676 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId <APPLE , Apple00,000000c1>, AslId < ,01000013> acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpiec0 at acpi0 (EC, PNP0C09): using acpiecdt0 acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch PNLF (APP0002) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button PDRC (PNP0C02) at acpi0 not configured acpivga0 at acpi0 (GFX0): ACPI Display Adapter acpiout0 at acpivga0 (LCD, 0x0400): ACPI Display Output Device acpiout1 at acpivga0 (VGA, 0x0300): ACPI Display Output Device acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device acpivga0: connected output devices: acpivga0: 0x0400 (acpiout0): Int. Digital Flat Panel, index 0, port 0, head 0, bios detect acpivga0: 0x0200 (acpiout2): TV/HDTV Monitor, index 0, port 0, head 0, bios detect acpivga0: 0x0300 (acpiout1): Ext. Digital Monitor, index 0, port 0, head 0, bios detect SMC (APP0001) at acpi0 not configured SMS0 (APP0003) at acpi0 not configured SBS0 (ACPI0002) at acpi0 not configured FWHD (INT0800) at acpi0 not configured LDRC (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x03) agp0 at pchb0: detected 15868k stolen memory agp0: aperture at 0x40000000, size 0x20000000 vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x03) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 i915drm0 at vga0: Intel i965GM i915drm0: AGP at 0x40000000 256MB i915drm0: Initialized i915 1.6.0 20080730 vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03) uhci0: interrupting at ioapic0 pin 20 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03) uhci1: interrupting at ioapic0 pin 16 usb1 at uhci1: USB revision 1.0 ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03) ehci0: interrupting at ioapic0 pin 21 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 usb2 at ehci0: USB revision 2.0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 20 hdafg0 at hdaudio0: Realtek ALC885 hdafg0: ADC00 2ch: Mic In [Built-In] hdafg0: ADC01 2ch: Line In [Jack] hdafg0: DIG-In02 2ch: SPDIF In [Jack] hdafg0: DAC03 4ch: Speaker [Built-In] hdafg0: DAC04 2ch: HP Out [Jack] hdafg0: DIG05 2ch: SPDIF Out [Jack] hdafg0: 4ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: full duplex, playback, capture, independent ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03) ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x03) ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok bwi0 at pci2 dev 0 function 0: Broadcom Wireless bwi0: interrupting at ioapic0 pin 16 bwi0: BBP id 0x4321, BBP rev 0x3, BBP pkg 0 bwi0: MAC: rev 12 bwi0: bus regwin already exists bwi0: PHY type 4, rev 2, ver 5 bwi0: unsupported PHY type 4 ppb2 at pci0 dev 28 function 5: vendor 0x8086 product 0x2849 (rev. 0x03) ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex> pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok mskc0 at pci3 dev 0 function 0, Yukon-2 EC Ultra rev. B0 (0x3): ioapic0 pin 17 msk0 at mskc0 port A: Ethernet address [_MAC_XXXXXXXXXX] ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x000b, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03) uhci2: interrupting at ioapic0 pin 16 usb3 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03) uhci3: interrupting at ioapic0 pin 18 usb4 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03) uhci4: interrupting at ioapic0 pin 21 usb5 at uhci4: USB revision 1.0 ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03) ehci1: interrupting at ioapic0 pin 20 ehci1: EHCI version 1.0 ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 usb6 at ehci1: USB revision 2.0 ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled fwohci0 at pci4 dev 3 function 0: vendor 0x11c1 product 0x5811 (rev. 0x61) fwohci0: interrupting at ioapic0 pin 19 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:f2:a0 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2815 (rev. 0x03) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel configured to native-PCI mode piixide0: using ioapic0 pin 21 for native-PCI interrupt atabus0 at piixide0 channel 0 piixide0: secondary channel configured to native-PCI mode atabus1 at piixide0 channel 1 piixide1 at pci0 dev 31 function 2: Intel 82801HEM Serial ATA Controller (ICH8M) (rev. 0x03) piixide1: bus-master DMA support present piixide1: primary channel configured to native-PCI mode piixide1: using ioapic0 pin 18 for native-PCI interrupt atabus2 at piixide1 channel 0 piixide1: secondary channel configured to native-PCI mode atabus3 at piixide1 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03) ichsmb0: interrupting at ioapic0 pin 20 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer1: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: FFH, lat 1 us, pow 500 mW acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check acpicpu0: P0: FFH, lat 10 us, pow 32000 mW, 2100 MHz acpicpu0: P1: FFH, lat 10 us, pow 32000 mW, 2000 MHz acpicpu0: P2: FFH, lat 10 us, pow 27750 mW, 1800 MHz acpicpu0: P3: FFH, lat 10 us, pow 23500 mW, 1600 MHz acpicpu0: P4: FFH, lat 10 us, pow 19250 mW, 1400 MHz acpicpu0: P5: FFH, lat 10 us, pow 15000 mW, 1200 MHz acpicpu0: P6: FFH, lat 10 us, pow 14300 mW, 800 MHz acpicpu0: T0: FFH, lat 1 us, pow 14300 mW, 100 % acpicpu0: T1: FFH, lat 1 us, pow 12512 mW, 88 % acpicpu0: T2: FFH, lat 1 us, pow 10725 mW, 75 % acpicpu0: T3: FFH, lat 1 us, pow 8937 mW, 63 % acpicpu0: T4: FFH, lat 1 us, pow 7150 mW, 50 % acpicpu0: T5: FFH, lat 1 us, pow 5362 mW, 38 % acpicpu0: T6: FFH, lat 1 us, pow 3575 mW, 25 % acpicpu0: T7: FFH, lat 1 us, pow 1787 mW, 13 % coretemp0 at cpu0: thermal sensor, 1 C resolution acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter offline. uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered uhub2 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhub5 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered uhub6 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub6: 2 ports with 2 removable, self powered atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: <MATSHITACD-RW CW-8221, , GA0K> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) ugen0 at uhub3 port 4 ugen0: Micron Built-in iSight, rev 2.00/1.84, addr 2 wd0 at atabus2 drive 0 wd0: <Hitachi HTS542512K9SA00> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1 ukbd0 at uhidev0 wd0: GPT GUID: 000037c0-1c81-0000-a51b-00000a2a0000 dk0 at wd0: EFI system partition dk0: 409600 blocks at 40, type: msdos dk1 at wd0: Customer dk1: 222035968 blocks at 409640, type: hfs dk2 at wd0: Apple_HFS_Untitled_2 dk2: 11471712 blocks at 222707752, type: hfs wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex, playback, capture wskbd0 at ukbd0: console keyboard, using wsdisplay0 boot device: cd0 root on cd0a dumps on cd0b root file system type: cd9660 warning: no /dev/console uhidev1 at uhub6 port 1 configuration 1 interface 0 uhidev1: Apple Computer, Inc. IR Receiver, rev 2.00/0.16, addr 2, iclass 3/0 uhidev1: 38 report ids uhid0 at uhidev1 reportid 36: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 37: input=4, output=0, feature=0 uhid2 at uhidev1 reportid 38: input=4, output=0, feature=0 uhidev2 at uhub6 port 2 configuration 1 interface 0 uhidev2: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/1 ukbd1 at uhidev2 wskbd1 at ukbd1 mux 1 wskbd1: connecting to wsdisplay0 uhidev3 at uhub6 port 2 configuration 1 interface 1 uhidev3: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/1 uhidev3: 5 report ids ums0 at uhidev3 reportid 2: 3 buttons wsmouse0 at ums0 mux 0 uhid3 at uhidev3 reportid 5: input=63, output=0, feature=16 uhidev4 at uhub6 port 2 configuration 1 interface 2 uhidev4: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/0 uhid4 at uhidev4: input=1, output=0, feature=0 acpibat0: normal capacity on 'charge state'