Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-02-19 16:51:35
From: ike
Description: pfSense 2.2 with Chelsio 10Gbit optics
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:12:35 CST 2015
root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz (3000.06-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306e4 Family = 0x6 Model = 0x3e Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16541081600 (15774 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs
FreeBSD/SMP: 2 package(s) x 10 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
cpu4 (AP): APIC ID: 8
cpu5 (AP): APIC ID: 16
cpu6 (AP): APIC ID: 18
cpu7 (AP): APIC ID: 20
cpu8 (AP): APIC ID: 22
cpu9 (AP): APIC ID: 24
cpu10 (AP): APIC ID: 32
cpu11 (AP): APIC ID: 34
cpu12 (AP): APIC ID: 36
cpu13 (AP): APIC ID: 38
cpu14 (AP): APIC ID: 40
cpu15 (AP): APIC ID: 48
cpu16 (AP): APIC ID: 50
cpu17 (AP): APIC ID: 52
cpu18 (AP): APIC ID: 54
cpu19 (AP): APIC ID: 56
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80606c30, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80606ce0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80606d90, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8062e400, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8062e4b0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8062e560, 0) error 1
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
pci3: <network, ethernet> at device 0.1 (no driver attached)
pci3: <network, ethernet> at device 0.2 (no driver attached)
pci3: <network, ethernet> at device 0.3 (no driver attached)
t5nex0: <Chelsio T520-CR> mem 0xc6300000-0xc637ffff,0xc5000000-0xc5ffffff,0xc6b04000-0xc6b05fff irq 32 at device 0.4 on pci3
cxl0: <port 0> on t5nex0
cxl0: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
cxl1: <port 1> on t5nex0
cxl1: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
t5nex0: PCIe x8, 2 ports, 22 MSI-X interrupts, 71 eq, 21 iq
pci3: <mass storage, SCSI> at device 0.5 (no driver attached)
pci3: <serial bus, Fibre Channel> at device 0.6 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 41 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 41 at device 3.2 on pci0
pci5: <ACPI PCI bus> on pcib5
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0x8020-0x803f mem 0xc4680000-0xc46fffff,0xc4704000-0xc4707fff irq 42 at device 0.0 on pci5
ix0: Using MSIX interrupts with 9 vectors
ix0: RX Descriptors exceed system mbuf max, using default instead!
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0x8000-0x801f mem 0xc4600000-0xc467ffff,0xc4700000-0xc4703fff irq 45 at device 0.1 on pci5
ix1: Using MSIX interrupts with 9 vectors
ix1: RX Descriptors exceed system mbuf max, using default instead!
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci7: <ACPI PCI bus> on pcib6
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x7000-0x70ff mem 0xc447c000-0xc447ffff,0xc4000000-0xc43fffff irq 16 at device 0.0 on pci7
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc6c23000-0xc6c233ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib7
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6060-0x607f mem 0xc7e60000-0xc7e7ffff,0xc7e8c000-0xc7e8ffff irq 16 at device 0.0 on pci8
igb0: Using MSIX interrupts with 9 vectors
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6040-0x605f mem 0xc7e40000-0xc7e5ffff,0xc7e88000-0xc7e8bfff irq 17 at device 0.1 on pci8
igb1: Using MSIX interrupts with 9 vectors
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 12
igb1: Bound queue 5 to cpu 13
igb1: Bound queue 6 to cpu 14
igb1: Bound queue 7 to cpu 15
igb2: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6020-0x603f mem 0xc7e20000-0xc7e3ffff,0xc7e84000-0xc7e87fff irq 18 at device 0.2 on pci8
igb2: Using MSIX interrupts with 9 vectors
igb2: Bound queue 0 to cpu 16
igb2: Bound queue 1 to cpu 17
igb2: Bound queue 2 to cpu 18
igb2: Bound queue 3 to cpu 19
igb2: Bound queue 4 to cpu 0
igb2: Bound queue 5 to cpu 1
igb2: Bound queue 6 to cpu 2
igb2: Bound queue 7 to cpu 3
igb3: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6000-0x601f mem 0xc7e00000-0xc7e1ffff,0xc7e80000-0xc7e83fff irq 19 at device 0.3 on pci8
igb3: Using MSIX interrupts with 9 vectors
igb3: Bound queue 0 to cpu 4
igb3: Bound queue 1 to cpu 5
igb3: Bound queue 2 to cpu 6
igb3: Bound queue 3 to cpu 7
igb3: Bound queue 4 to cpu 8
igb3: Bound queue 5 to cpu 9
igb3: Bound queue 6 to cpu 10
igb3: Bound queue 7 to cpu 11
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc6c22000-0xc6c223ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xc3000000-0xc3ffffff,0xc7800000-0xc7803fff,0xc7000000-0xc77fffff irq 16 at device 1.0 on pci10
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xc6c21000-0xc6c217ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci127: <ACPI PCI bus> on pcib9
pcib10: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 51 at device 1.0 on pci128
pci129: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 57 at device 2.0 on pci128
pci130: <ACPI PCI bus> on pcib12
igb4: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfaf00000-0xfaffffff,0xfb00c000-0xfb00ffff irq 56 at device 0.0 on pci130
igb4: Using MSIX interrupts with 9 vectors
igb4: Bound queue 0 to cpu 12
igb4: Bound queue 1 to cpu 13
igb4: Bound queue 2 to cpu 14
igb4: Bound queue 3 to cpu 15
igb4: Bound queue 4 to cpu 16
igb4: Bound queue 5 to cpu 17
igb4: Bound queue 6 to cpu 18
igb4: Bound queue 7 to cpu 19
igb5: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfae00000-0xfaefffff,0xfb008000-0xfb00bfff irq 60 at device 0.1 on pci130
igb5: Using MSIX interrupts with 9 vectors
igb5: Bound queue 0 to cpu 0
igb5: Bound queue 1 to cpu 1
igb5: Bound queue 2 to cpu 2
igb5: Bound queue 3 to cpu 3
igb5: Bound queue 4 to cpu 4
igb5: Bound queue 5 to cpu 5
igb5: Bound queue 6 to cpu 6
igb5: Bound queue 7 to cpu 7
igb6: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfad00000-0xfadfffff,0xfb004000-0xfb007fff irq 61 at device 0.2 on pci130
igb6: Using MSIX interrupts with 9 vectors
igb6: Bound queue 0 to cpu 8
igb6: Bound queue 1 to cpu 9
igb6: Bound queue 2 to cpu 10
igb6: Bound queue 3 to cpu 11
igb6: Bound queue 4 to cpu 12
igb6: Bound queue 5 to cpu 13
igb6: Bound queue 6 to cpu 14
igb6: Bound queue 7 to cpu 15
igb7: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfac00000-0xfacfffff,0xfb000000-0xfb003fff irq 62 at device 0.3 on pci130
igb7: Using MSIX interrupts with 9 vectors
igb7: Bound queue 0 to cpu 16
igb7: Bound queue 1 to cpu 17
igb7: Bound queue 2 to cpu 18
igb7: Bound queue 3 to cpu 19
igb7: Bound queue 4 to cpu 0
igb7: Bound queue 5 to cpu 1
igb7: Bound queue 6 to cpu 2
igb7: Bound queue 7 to cpu 3
pcib13: <ACPI PCI-PCI bridge> irq 65 at device 3.0 on pci128
pci132: <ACPI PCI bus> on pcib13
pci132: <network, ethernet> at device 0.0 (no driver attached)
pci132: <network, ethernet> at device 0.1 (no driver attached)
pci132: <network, ethernet> at device 0.2 (no driver attached)
pci132: <network, ethernet> at device 0.3 (no driver attached)
t5nex1: <Chelsio T520-CR> mem 0xfa300000-0xfa37ffff,0xf9000000-0xf9ffffff,0xfab04000-0xfab05fff irq 64 at device 0.4 on pci132
cxl2: <port 0> on t5nex1
cxl2: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
cxl3: <port 1> on t5nex1
cxl3: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
t5nex1: PCIe x8, 2 ports, 22 MSI-X interrupts, 71 eq, 21 iq
pci132: <mass storage, SCSI> at device 0.5 (no driver attached)
pci132: <serial bus, Fibre Channel> at device 0.6 (no driver attached)
pcib14: <ACPI PCI-PCI bridge> irq 65 at device 3.2 on pci128
pci133: <ACPI PCI bus> on pcib14
pcib15: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib15
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
est16: <Enhanced SpeedStep Frequency Control> on cpu16
p4tcc16: <CPU Frequency Thermal Control> on cpu16
est17: <Enhanced SpeedStep Frequency Control> on cpu17
p4tcc17: <CPU Frequency Thermal Control> on cpu17
est18: <Enhanced SpeedStep Frequency Control> on cpu18
p4tcc18: <CPU Frequency Thermal Control> on cpu18
est19: <Enhanced SpeedStep Frequency Control> on cpu19
p4tcc19: <CPU Frequency Thermal Control> on cpu19
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp> at usbus0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd0 at ukbd0
ugen1.3: <Dell> at usbus1
ukbd1: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 3> on usbus1
kbd2 at ukbd1
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich4 bus 0 scbus5 target 0 lun 0
ada0: <InnoLite SATADOM D150QV 120319> ATA-8 SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad12
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <InnoLite SATADOM D150QV 120319> ATA-8 SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad14
GEOM_MIRROR: Device mirror/pfSenseMirror launched (2/2).
SMP: AP CPU #19 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1500030836 Hz quality 1000
Trying to mount root from ufs:/dev/mirror/pfSenseMirrors1a [rw]...
WARNING: / was not properly dismounted
igb7: link state changed to UP
pflog0: promiscuous mode enabled
igb3: link state changed to UP
igb3: link state changed to DOWN
igb3: link state changed to UP
igb3: link state changed to DOWN
igb3: link state changed to UP
pflog0: promiscuous mode disabled
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:12:35 CST 2015
root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz (3000.07-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306e4 Family = 0x6 Model = 0x3e Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16541081600 (15774 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs
FreeBSD/SMP: 2 package(s) x 10 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
cpu4 (AP): APIC ID: 8
cpu5 (AP): APIC ID: 16
cpu6 (AP): APIC ID: 18
cpu7 (AP): APIC ID: 20
cpu8 (AP): APIC ID: 22
cpu9 (AP): APIC ID: 24
cpu10 (AP): APIC ID: 32
cpu11 (AP): APIC ID: 34
cpu12 (AP): APIC ID: 36
cpu13 (AP): APIC ID: 38
cpu14 (AP): APIC ID: 40
cpu15 (AP): APIC ID: 48
cpu16 (AP): APIC ID: 50
cpu17 (AP): APIC ID: 52
cpu18 (AP): APIC ID: 54
cpu19 (AP): APIC ID: 56
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80606c30, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80606ce0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80606d90, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8062e400, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8062e4b0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8062e560, 0) error 1
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
pci3: <network, ethernet> at device 0.1 (no driver attached)
pci3: <network, ethernet> at device 0.2 (no driver attached)
pci3: <network, ethernet> at device 0.3 (no driver attached)
t5nex0: <Chelsio T520-CR> mem 0xc6300000-0xc637ffff,0xc5000000-0xc5ffffff,0xc6b04000-0xc6b05fff irq 32 at device 0.4 on pci3
cxl0: <port 0> on t5nex0
cxl0: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
cxl1: <port 1> on t5nex0
cxl1: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
t5nex0: PCIe x8, 2 ports, 22 MSI-X interrupts, 71 eq, 21 iq
pci3: <mass storage, SCSI> at device 0.5 (no driver attached)
pci3: <serial bus, Fibre Channel> at device 0.6 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 41 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 41 at device 3.2 on pci0
pci5: <ACPI PCI bus> on pcib5
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0x8020-0x803f mem 0xc4680000-0xc46fffff,0xc4704000-0xc4707fff irq 42 at device 0.0 on pci5
ix0: Using MSIX interrupts with 9 vectors
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0x8000-0x801f mem 0xc4600000-0xc467ffff,0xc4700000-0xc4703fff irq 45 at device 0.1 on pci5
ix1: Using MSIX interrupts with 9 vectors
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci7: <ACPI PCI bus> on pcib6
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x7000-0x70ff mem 0xc447c000-0xc447ffff,0xc4000000-0xc43fffff irq 16 at device 0.0 on pci7
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc6c23000-0xc6c233ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib7
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6060-0x607f mem 0xc7e60000-0xc7e7ffff,0xc7e8c000-0xc7e8ffff irq 16 at device 0.0 on pci8
igb0: Using MSIX interrupts with 2 vectors
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6040-0x605f mem 0xc7e40000-0xc7e5ffff,0xc7e88000-0xc7e8bfff irq 17 at device 0.1 on pci8
igb1: Using MSIX interrupts with 2 vectors
igb2: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6020-0x603f mem 0xc7e20000-0xc7e3ffff,0xc7e84000-0xc7e87fff irq 18 at device 0.2 on pci8
igb2: Using MSIX interrupts with 2 vectors
igb3: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x6000-0x601f mem 0xc7e00000-0xc7e1ffff,0xc7e80000-0xc7e83fff irq 19 at device 0.3 on pci8
igb3: Using MSIX interrupts with 2 vectors
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc6c22000-0xc6c223ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xc3000000-0xc3ffffff,0xc7800000-0xc7803fff,0xc7000000-0xc77fffff irq 16 at device 1.0 on pci10
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xc6c21000-0xc6c217ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci127: <ACPI PCI bus> on pcib9
pcib10: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 51 at device 1.0 on pci128
pci129: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 57 at device 2.0 on pci128
pci130: <ACPI PCI bus> on pcib12
igb4: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfaf00000-0xfaffffff,0xfb00c000-0xfb00ffff irq 56 at device 0.0 on pci130
igb4: Using MSIX interrupts with 2 vectors
igb5: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfae00000-0xfaefffff,0xfb008000-0xfb00bfff irq 60 at device 0.1 on pci130
igb5: Using MSIX interrupts with 2 vectors
igb6: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfad00000-0xfadfffff,0xfb004000-0xfb007fff irq 61 at device 0.2 on pci130
igb6: Using MSIX interrupts with 2 vectors
igb7: <Intel(R) PRO/1000 Network Connection version - 2.4.0> mem 0xfac00000-0xfacfffff,0xfb000000-0xfb003fff irq 62 at device 0.3 on pci130
igb7: Using MSIX interrupts with 2 vectors
pcib13: <ACPI PCI-PCI bridge> irq 65 at device 3.0 on pci128
pci132: <ACPI PCI bus> on pcib13
pci132: <network, ethernet> at device 0.0 (no driver attached)
pci132: <network, ethernet> at device 0.1 (no driver attached)
pci132: <network, ethernet> at device 0.2 (no driver attached)
pci132: <network, ethernet> at device 0.3 (no driver attached)
t5nex1: <Chelsio T520-CR> mem 0xfa300000-0xfa37ffff,0xf9000000-0xf9ffffff,0xfab04000-0xfab05fff irq 64 at device 0.4 on pci132
cxl2: <port 0> on t5nex1
cxl2: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
cxl3: <port 1> on t5nex1
cxl3: 16 txq, 8 rxq (NIC); 8 txq, 2 rxq (TOE)
t5nex1: PCIe x8, 2 ports, 22 MSI-X interrupts, 71 eq, 21 iq
pci132: <mass storage, SCSI> at device 0.5 (no driver attached)
pci132: <serial bus, Fibre Channel> at device 0.6 (no driver attached)
pcib14: <ACPI PCI-PCI bridge> irq 65 at device 3.2 on pci128
pci133: <ACPI PCI bus> on pcib14
pcib15: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib15
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
est16: <Enhanced SpeedStep Frequency Control> on cpu16
p4tcc16: <CPU Frequency Thermal Control> on cpu16
est17: <Enhanced SpeedStep Frequency Control> on cpu17
p4tcc17: <CPU Frequency Thermal Control> on cpu17
est18: <Enhanced SpeedStep Frequency Control> on cpu18
p4tcc18: <CPU Frequency Thermal Control> on cpu18
est19: <Enhanced SpeedStep Frequency Control> on cpu19
p4tcc19: <CPU Frequency Thermal Control> on cpu19
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp> at usbus0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd0 at ukbd0
ugen1.3: <Dell> at usbus1
ukbd1: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 3> on usbus1
kbd2 at ukbd1
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich4 bus 0 scbus5 target 0 lun 0
ada0: <InnoLite SATADOM D150QV 120319> ATA-8 SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad12
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <InnoLite SATADOM D150QV 120319> ATA-8 SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad14
GEOM_MIRROR: Device mirror/pfSenseMirror launched (2/2).
SMP: AP CPU #16 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #11 Launched!
Timecounter "TSC-low" frequency 1500032952 Hz quality 1000
Trying to mount root from ufs:/dev/mirror/pfSenseMirrors1a [rw]...
igb7: link state changed to UP
pflog0: promiscuous mode enabled
igb3: link state changed to UP
ugen1.3: <Dell> at usbus1 (disconnected)
ukbd1: at uhub3, port 1, addr 3 (disconnected)
ugen1.3: <Chicony> at usbus1
ukbd1: <Chicony USB Keyboard, class 0/0, rev 1.10/3.90, addr 3> on usbus1
kbd2 at ukbd1
uhid0: <Chicony USB Keyboard, class 0/0, rev 1.10/3.90, addr 3> on usbus1