Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2015-03-06 14:14:39
From: nonakap
Description: MikroTik RouterBOARD RB800
RouterBOOT booter 3.18

RouterBoard 800

CPU frequency: 800 MHz
  Memory size: 256 MiB
    NAND size: 512 MiB

Press any key within 2 seconds to enter setup..
trying bootp protocol.... OK
Got IP address:
resolved mac address xx:xx:xx:xx:xx:xx
transfer started .................................... transfer ok, time=0.83s
setting up elf image... OK
jumping to kernel code
 initppc(0x20000, 0x47d000, 0x38c2a20, 0x0, 0x0, 0x0)<enter> porpllsr=0x00c4000c sys_clk=66666667 comcnfreq=400000002 openpic-reset(ctpr=15) cache(DC=32KB/32,IC=32KB/32) bptr=0 memprobe=256MB e500_tlbinit(0x47d000,256MB) hid0=0/0x80804000 hid1=0xc4001000 pordevsr=0x2a320860 devdisr=0 msgbuf=0xfffe000 exception_init=0x323038 kv_nsegtabs=0x24 kv_segtabs=0x47d000 uvm_page_physload(0x4a1,0xfffd,0x4a1,0xfffd,0)powerpc_fixup_stubs: 854 fixups done in 706867 cycles
 initppc done!
Loaded initial symtab at 0x3f7460, strtab at 0x424d00, # entries 11640
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.5 (RB800-$Revision: 1.30 $) #0: Fri Mar  6 23:10:15 JST 2015
total memory = 256 MB
avail memory = 246 MB
mainbus0 (root)
cpunode0 at mainbus0 node 0
cpunode0: 256KB/32B 4-banked 8-way unified L2 cache
cpu0 at cpunode0
cpu0: 800 MHz MPC8544E 1.1 with an e500v2 2.2 core, ID 0 (Primary)
cpu0: 32KB/32B 8-way L1 data cache
cpu0: 32KB/32B 8-way L1 instruction cache
cpu0: 2 TLBs, 3 concurrent 8-bit PIDs (256 total)
cpu0: tlb0: 512 fixed-size (4KB) 4-way set associative entries
cpu0: tlb1: 16 variable-size (4KB..4GB) fully associative entries
e500wdog0 at cpunode0: default period is 6 seconds (wdog is active)
duart0 at cpunode0: 2 ports
com0 at duart0 port 1: ns16550a, working fifo
com0: console
com1 at duart0 port 2: ns16550a, working fifo
duart0: interrupting on irq 26
tsec0 at cpunode0 instance 1 phy 2
mdio0 at tsec0
tsec0: Ethernet address xx:xx:xx:xx:xx:xx
atphy0 at mdio0 phy 2: Atheros AR8021 10/100/1000 PHY, rev. 14
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
tsec1 at cpunode0 instance 2 mdio 0 phy 1
tsec1: Ethernet address xx:xx:xx:xx:xx:xx
atphy1 at mdio0 phy 1: Atheros AR8021 10/100/1000 PHY, rev. 14
atphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
diic0 at cpunode0: 2 ports
iic0 at diic0: I2C bus
iic1 at diic0: I2C bus
diic0: interrupting on irq 27
gpio at cpunode0 not configured
ddrc at cpunode0 not configured
obio0 at cpunode0: 4 of 8 ports enabled
obio0: cs0: 16MB 8-bit GPCM region at 0xff000000
obio0: cs1: 32KB 8-bit UPMA region at 0xf8000000
obio0: cs2: 2MB 16-bit UPMC region at 0xf9000000
obio0: cs5: 32KB 8-bit UPMB region at 0xf0000000
pq3pcie0 at cpunode0 instance 1: PCI-Express x4 controller (offline)
pq3pcie1 at cpunode0 instance 2: PCI-Express x4 controller (offline)
pq3pcie2 at cpunode0 instance 3: PCI-Express x1 controller
pci0 at pq3pcie2 bus 0
ppb0 at pci0 dev 0 function 0: Freescale Semiconductor MPC8544E (rev. 0x11)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x8 @ 2.5GT/s
pci1 at ppb0 bus 1
alc0 at pci1 dev 0 function 0: Atheros AR8131 PCIe Gigabit Ethernet
alc0: interrupting at msi 1
alc0: Ethernet address xx:xx:xx:xx:xx:xx
atphy2 at alc0 phy 0: L1 10/100/1000 PHY, rev. 11
atphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
pq3pci0 at cpunode0: 32-bit PCI controller
pci2 at pq3pci0 bus 0
Freescale Semiconductor MPC8544E (PowerPC processor, revision 0x11) at pci2 dev 0 function 0 not configured
cpunode0: 8 input pins, 8 output pins
gpio0 at cpunode0: 8 pins
gpio1 at cpunode0: 8 pins
root device: